- Joined
- Jun 8, 2022
- Messages
- 381 (0.45/day)
- Location
- Ohio, USA
| System Name | Trackstar |
|---|---|
| Processor | AMD Ryzen 7 5800X3D -30 All Core CO (on Corsair XC5 block) |
| Motherboard | Gigabyte B550 AORUS Elite V2 Rev 1.0 (F17 BIOS) |
| Cooling | Corsair XD5 pump / Corsair XR5 1x 360mm (front) + 1x 420mm (top) rads |
| Memory | 32GB G.Skill DDR4-3600 CL14 1:1 (F4-3600C14Q-32GVKA kit) |
| Video Card(s) | ASRock RX 6950XT OC Formula (on Bykski A-AR6900XTOCF-X block) |
| Storage | WD_BLACK SN850X 2TB w/HS (FW ver. 620361WD) |
| Display(s) | Dell S3222DGM 32" 1440p/165Hz FreeSync |
| Case | Fractal Design Meshify S2 |
| Audio Device(s) | Realtek ALC1200 Integrated Audio |
| Power Supply | Super Flower Leadex Platinum SE 1200W on Liebert GXT4-1500RT120 UPS |
| Mouse | Corsair Nightsword RGB |
| Keyboard | Corsair K60 RGB PRO |
| VR HMD | N/A |
| Software | Windows 11 Pro 23H2 (Build 22631.3958) |
| Benchmark Scores | https://www.3dmark.com/sw/1131940 https://www.3dmark.com/fs/29315810 |
Recently bought an i7-5775C for an overclocking side project. Found some cheap DDR3-2400 memory to try and get the most out of the platform however I'm having trouble getting the system to POST after loading the 2400 XMP profile. Realized I failed to consider that the non-"E" Broadwell IMC might not be up to the task for such a high frequency. Even raising the SA voltage to 1.18 and analog/digital voltage offset to +.150 it still fails to post at 2400. Only when I loosen the timings and set the multiplier to 21.33 (DDR3-2133) am I able to get it to POST.
Might be a long shot here but does anybody have experience with memory overclocking on Broadwell-DT and if so where do you find the IMC tops out at?
Might be a long shot here but does anybody have experience with memory overclocking on Broadwell-DT and if so where do you find the IMC tops out at?
