Lian Li O11 Dynamic XL ROG.

[Oldschool297]

I bought one espcially for the Argb list. I liked it and the Chrome around the front ports. Does anyone knows what the Usb-C port is espcially for? Charge the Phone? I have a Asrock z590 oc formula motherboard. And a Noctua NH-D12L
It is espcially designed to suit Lga1200 so the memorys are visible. The G.SKILL Trident Z Royal Series (Intel XMP) DDR4 RAM 32GB (2x16GB) 4000MT/s CL18-22-22-42 1.40V Desktop Computer Memory UDIMM - Silver (F4-4000C18D-32GTRS). Is good looking with the crystals.

View attachment 6903778_13.webp

 

[Solaris17]

I mean if it’s anything like the o11 I have then it’s a fully functional data port. The termination is a proper cable you plug into your board.

 

[Oldschool297]

Is it better to charge the Phone in the Usb-C?

 

[Fokker]

USB-C is just going to be a high speed data port assuming your motherboard doesn't have any provisions for using it for video or other modern uses for USB-C (I would also assume the case only treats it as a Type-C 3.1 and not a Thunderbolt/display port). It should function to both charge a phone, but also move data off the phone or connect an external drive (I have external M.2 housings that come with C to C cables). It won't be better for charging your phone over a dedicated charger as the phone likely will not recognize it as a fast charge option and you'll see longer charge times.

 

[Dr. Dro]

USB-C is just going to be a high speed data port assuming your motherboard doesn't have any provisions for using it for video or other modern uses for USB-C (I would also assume the case only treats it as a Type-C 3.1 and not a Thunderbolt/display port). It should function to both charge a phone, but also move data off the phone or connect an external drive (I have external M.2 housings that come with C to C cables). It won't be better for charging your phone over a dedicated charger as the phone likely will not recognize it as a fast charge option and you'll see longer charge times.

Unless the motherboard has USB-PD support. The Z590 OCF doesn't seem to.

That's an amazing board... hope OP is giving it a nice and cool i9-11900K

 

[Oldschool297]

Yes i will buy one i9k. Is that the best model? There are two concacts from the chassi to the motherboard. One to the upper front and one to the 2 usb ports in the bottom. I only have one usb 3.2 on the motherboard as i can see in the picture. I then need a pcie card to the 2 usb 2.0 ports?

 

[Dr. Dro]

Yes i will buy one i9k. Is that the best model? There are two concacts from the chassi to the motherboard. One to the upper front and one to the 2 usb ports in the bottom. I only have one usb 3.2 on the motherboard as i can see in the picture. I then need a pcie card to the 2 usb 2.0 ports?

For the Z590, yes, the 11th Gen i9-11900K.

No need for a PCIe card.

 

[Oldschool297]

How do i connect a second usb 3.0 to the motherboard? I thought it only was one contact. I must check the manual. I also thought about giving the chassi 2 Argb lists as in this chassi.

I saw in the manual that there are 2 Usb 3.1 Gen1 Headers. So you had right. If it suits.

https://www.amazon.com/Lian-Li-O11D-gaming-chamber/dp/B0CRKVN35N/ref=mp_s_a_1_57_sspa?crid=N6A9H4EB57NB&dib=eyJ2IjoiMSJ9.ao-x-BbWSxs507_6OLM-eoc-0s5GUBmTeIbns9j1g2fCoQ60t6h7RyUUgDmnRMUIf1GPWtgZ4zqVc6AmThc--yHiK8IPGembn-ymCiV35b4TaQge_HeKrmOIoa3z0AyLoxWnlKmFuoCt2lNu8kKaR-j_2L5PLFTRP4rlJxjx22kKIblqMZf5xMfh2RUetXROhWexDqBECP0uKHXB9aeynw.6ThV9QORyW_bJwUg10pAWxBdgs4lE6xPWaK1RV8X7d4&dib_tag=se&keywords=Motherboard&qid=1725288354&refinements=p_36%3A15500-26500&rnid=386442011&sprefix=moth%2Caps%2C1098&sr=8-57-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRmX25leHQ&psc=1#immersive-view_1725288407315

What slim lists to buy? There is a little room to my chassi when the top us on.

View attachment 712giHWFxxL._AC_UF1000,1000_QL80_FMwebp_.webp

 

[Fokker]

In the first post you're showing the 011 Dynamic XL and in this latest one you're showing the 011 Dynamic EVO RGB. Are you considering a smaller case now?

What do you mean by "slim lists"?

The 011 Dynamic EVO RGB has a large amount of space for fans with an EATX board installed, even if you're running radiators too.

 

[Dr. Dro]

How do i connect a second usb 3.0 to the motherboard? I thought it only was one contact. I must check the manual. I also thought about giving the chassi 2 Argb lists as in this chassi.

I saw in the manual that there are 2 Usb 3.1 Gen1 Headers. So you had right. If it suits.

I don't blame you for being confused, they made a royal mess out of the USB naming convention. 3.1 Gen 1 basically means standard SuperSpeed USB 3.0 (5 Gbps) ports.

The motherboard you chose has 5, 10 and a single 20 Gbps port. I don't expect the case to support more than 5 Gbps connection reliably, so you should get used to connecting things onto the motherboard. A high-quality, 20 Gbps (USB 3.2 Gen 2x2 or whatever the hell they are calling it) capable hub is something you should look at purchasing.

 

[Oldschool297]

Yes since the case is from 2019 it is true. It is complicated to change ports to newer when they are attached to a card that handles the Argb lighting to and the Usb-C port. I must check how the 2 usb connector cables in the chassi looks like.

I meant that i want to attach the Argb or RGB lists that are on the top and bottom to the EVO RGB chassi to my 011 Dynamic XL. I think the lists can suit at the top since there are some mm glitch when the top aluminium cover is on.

It was two 20 pins contacts in the chassi.