• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Daisy chaining mixed 4-pin fans

Joined
Mar 21, 2021
Messages
5,303 (3.73/day)
Location
Colorado, U.S.A.
System Name CyberPowerPC ET8070
Processor Intel Core i5-10400F
Motherboard Gigabyte B460M DS3H AC-Y1
Memory 2 x Crucial Ballistix 8GB DDR4-3000
Video Card(s) MSI Nvidia GeForce GTX 1660 Super
Storage Boot: Intel OPTANE SSD P1600X Series 118GB M.2 PCIE
Display(s) Dell P2416D (2560 x 1440)
Power Supply EVGA 500W1 (modified to have two bridge rectifiers)
Software Windows 11 Home
When one daisy chains 4-pin fans, only one has the tachometer pin active (to avoid mixed signals), but what if one was to daisy chain mixed fans, say 120mm and 140mm, should one take the tachometer signal from the smaller or larger fan?

I have a case that takes a 120mm exhaust fan and on top can carry two 140mm fans, all to be controlled by a single 4 pin connector on the motherboard.
 
Last edited:

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
43,537 (6.77/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
When one daisy chains 4-pin fans, only one has the tachometer pin active (to avoid mixed signals), but what if one was to daisy chain mixed fans, say 120mm and 140mm, should one take the tachometer signal from the smaller or larger fan?

I have a case that takes a 120mm exhaust fan and on top can carry two 140mm fans, all to be controlled by a single 4 pin connector on the motherboard.
Whats the max rpms for the 120 and the 140 mm?
 
Joined
Mar 21, 2021
Messages
5,303 (3.73/day)
Location
Colorado, U.S.A.
System Name CyberPowerPC ET8070
Processor Intel Core i5-10400F
Motherboard Gigabyte B460M DS3H AC-Y1
Memory 2 x Crucial Ballistix 8GB DDR4-3000
Video Card(s) MSI Nvidia GeForce GTX 1660 Super
Storage Boot: Intel OPTANE SSD P1600X Series 118GB M.2 PCIE
Display(s) Dell P2416D (2560 x 1440)
Power Supply EVGA 500W1 (modified to have two bridge rectifiers)
Software Windows 11 Home
2200 RPM for the 120 mm

1500 RPM for the 140 mm
 
Joined
Feb 22, 2016
Messages
2,122 (0.65/day)
Processor Intel i5 8400
Motherboard Asus Prime H370M-Plus/CSM
Cooling Scythe Big Shuriken & Noctua NF-A15 HS-PWM chromax.black.swap
Memory 8GB Crucial Ballistix Sport LT DDR4-2400
Video Card(s) ROG-STRIX-GTX1060-O6G-GAMING
Storage 1TB 980 Pro
Display(s) Samsung UN55KU6300F
Case Cooler Master MasterCase Pro 3
Power Supply Super Flower Leadex III 750w
Software W11 Pro
Whats the max rpms for the 120 and the 140 mm?

He suggests a set of these were recently purchased. Yet to further an explanation of how "daisy-chaining" will be handled.

Short of it this doesn't work well if at all on a lower end board. BIOS will express it's disregards in one of a few highly suggestive manners.
 
Joined
Mar 21, 2021
Messages
5,303 (3.73/day)
Location
Colorado, U.S.A.
System Name CyberPowerPC ET8070
Processor Intel Core i5-10400F
Motherboard Gigabyte B460M DS3H AC-Y1
Memory 2 x Crucial Ballistix 8GB DDR4-3000
Video Card(s) MSI Nvidia GeForce GTX 1660 Super
Storage Boot: Intel OPTANE SSD P1600X Series 118GB M.2 PCIE
Display(s) Dell P2416D (2560 x 1440)
Power Supply EVGA 500W1 (modified to have two bridge rectifiers)
Software Windows 11 Home
Will the BIOS even know? it is getting a speed reading from one fan alone.
 
Joined
Dec 25, 2020
Messages
7,512 (4.98/day)
Location
São Paulo, Brazil
System Name "Icy Resurrection"
Processor 13th Gen Intel Core i9-13900KS
Motherboard ASUS ROG Maximus Z790 Apex Encore
Cooling Noctua NH-D15S upgraded with 2x NF-F12 iPPC-3000 fans and Honeywell PTM7950 TIM
Memory 32 GB G.SKILL Trident Z5 RGB F5-6800J3445G16GX2-TZ5RK @ 7600 MT/s 36-44-44-52-96 1.4V
Video Card(s) NVIDIA RTX A2000
Storage 500 GB WD Black SN750 SE NVMe SSD + 4 TB WD Red Plus WD40EFPX HDD
Display(s) 55-inch LG G3 OLED
Case Pichau Mancer CV500 White Edition
Power Supply EVGA 1300 G2 1.3kW 80+ Gold
Mouse Microsoft Classic IntelliMouse (2017)
Keyboard IBM Model M type 1391405
Software Windows 10 Pro 22H2
Benchmark Scores I pulled a Qiqi~
Will the BIOS even know? it is getting a speed reading from one fan alone.

No, and yes, it is. The problem with fans that while the voltage supply from the motherboard is the same, the speed that each motor will run at different speed.

Assuming a linear response to voltage supply, similar blade design and air throughput with a 12 volt input, a theoretical fan A runs at 2000 RPM and fan B at 2200 RPM, at 8 volts fan A will run at 1320 and fan B at 1450, this will obviously result in mismatched noise levels and possibly, a pressure imbalance. It's best to get similar fans that work as a set if it can be helped, or use a fan controller that allows for individual setting for each port.
 
Joined
Feb 22, 2016
Messages
2,122 (0.65/day)
Processor Intel i5 8400
Motherboard Asus Prime H370M-Plus/CSM
Cooling Scythe Big Shuriken & Noctua NF-A15 HS-PWM chromax.black.swap
Memory 8GB Crucial Ballistix Sport LT DDR4-2400
Video Card(s) ROG-STRIX-GTX1060-O6G-GAMING
Storage 1TB 980 Pro
Display(s) Samsung UN55KU6300F
Case Cooler Master MasterCase Pro 3
Power Supply Super Flower Leadex III 750w
Software W11 Pro
BIOS handles the fan controller even if programming it is being overruled by third party software. The issue is cascading electrical responses the board doesn't expect will only extrapolate with mixed fans. Honestly, lower end boards are questionable powering and feeding a signal into even two identical fans drawing less than .5A peak.

Legacy board designed to barely support intake/cpu/exhaust are not a good platform to control amount of fans modern cases will mount.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
43,537 (6.77/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
2200 RPM for the 120 mm

1500 RPM for the 140 mm
Well to reach those faster speeds requires different input voltages.

You migh consider a fan controller that can handle those fans
 
Joined
Jul 24, 2024
Messages
407 (2.00/day)
System Name AM4_TimeKiller
Processor AMD Ryzen 5 5600X @ all-core 4.7 GHz
Motherboard ASUS ROG Strix B550-E Gaming
Cooling Arctic Freezer II 420 rev.7 (push-pull)
Memory G.Skill TridentZ RGB, 2x16 GB DDR4, B-Die, 3800 MHz @ CL14-15-14-29-43 1T, 53.2 ns
Video Card(s) ASRock Radeon RX 7800 XT Phantom Gaming
Storage Samsung 990 PRO 1 TB, Kingston KC3000 1 TB, Kingston KC3000 2 TB
Case Corsair 7000D Airflow
Audio Device(s) Creative Sound Blaster X-Fi Titanium
Power Supply Seasonic Prime TX-850
Mouse Logitech wireless mouse
Keyboard Logitech wireless keyboard
PWM control will work fine, that's independent of fan size. As for RPMs, this may or may not work properly.
I did similar thing years ago and the reporting results from BIOS were sometimes correct, sometimes badly inaccurate.
Even if you have "same" fans, their RPM will not be the same. Every manufacturer states kind of limits for RPMs (+/- speed % tolerances).
Thus, daisy chaining RPM signal from multiple fans of "same" type will not yield the most accurate results.

Pin for RPM speed does not work as 1-wire bus, fans are not addressable.
To get most accurate results, pick one fan and remove RPM pin connection from others.
 
Top