My computer has a issue

[Real name here]

My computer yesterday started to have a fan spinning at max speed any time I load up a game I checked all the case fans and the power supply what should I do?

My computers specs are

Ryzen 5 7600x
Ag620 wh
Msi b650 gaming motherboard
Corsair ddr5 6000mhz ram 2-16gb
Gigabyte 3080 ti
Kingston 2tb none
3.5inch 4tb wd hdd
2.5inch 1tb hdd don’t know the brand
1tb nvme in raid with 1tb hdd
Rm1000x power supply
6 ez diy pc fan
1 nzxt case fan
Lego brick gpu sag bracket

 

[eidairaman1]

How old is the system, and does your screen go blank for any reason and remain blank?

My computer yesterday started to have a fan spinning at max speed any time I load up a game I checked all the case fans and the power supply what should I do?

My computers specs are

Ryzen 5 7600x
Ag620 wh
Msi b650 gaming motherboard
Corsair ddr5 6000mhz ram 2-16gb
Gigabyte 3080 ti
Kingston 2tb none
3.5inch 4tb wd hdd
2.5inch 1tb hdd don’t know the brand
1tb nvme in raid with 1tb hdd
Rm1000x power supply
6 ez diy pc fan
1 nzxt case fan
Lego brick gpu sag bracket

 

[Real name here]

The system is less than a year old and I did not check for my screen going blank I shut my computer as soon as that happened

 

[Dr. Dro]

My computer yesterday started to have a fan spinning at max speed any time I load up a game I checked all the case fans and the power supply what should I do?

My computers specs are

Ryzen 5 7600x
Ag620 wh
Msi b650 gaming motherboard
Corsair ddr5 6000mhz ram 2-16gb
Gigabyte 3080 ti
Kingston 2tb none
3.5inch 4tb wd hdd
2.5inch 1tb hdd don’t know the brand
1tb nvme in raid with 1tb hdd
Rm1000x power supply
6 ez diy pc fan
1 nzxt case fan
Lego brick gpu sag bracket

Fans going super high speed usually means that your CPU is getting hot. Double check the CPU cooler installation, see if you didn't forget to remove the plastic film - happens to the best of us. Also double check if fan orientation is correct - top and back fans should exhaust, bottom and front fans should be intake

If after doing this and temperatures are confirmed to be within acceptable range (as is, below 95C load) - go into BIOS and increase fan hysteresis or make a smoother curve manually

 

[Real name here]

This is my pc I already got told to check my cpu cooler and the curve the cpu is fine same with the power supply as I mentioned the case fans from what I know should be at a stuck 800rpm

 

[Dr. Dro]

Fan orientation looks right. Try downloading HWiNFO64 and observe the CPU Diode temps when the fans spin up a lot. If this is above 90C, there's your problem. 800 rpm in most cases should be the "low speed" when temps are under control. You can lower this as low as 0 to 200 rpm on some motherboards

 

[eidairaman1]

Make sure it's clean, refresh your thermal paste on cpu, reseat parts into motherboard, clear cmos and make sure your motherboard bios is latest, also any fan software in the os make sure it is set to factory defaults

 

[QcRMoD]

You said A fan starts spinning up… have you isolated that fan?