- Joined
- Oct 1, 2014
- Messages
- 2,135 (0.54/day)
- Location
- Calabash, NC
Processor | Ryzen 7 7700X |
---|---|
Motherboard | ASUS ROG Crosshair X670E Extreme |
Cooling | Thermalright Grand Vision 360mm AIO, 3x Be Quiet Light Wings, 1x Silent Wings 4 |
Memory | 32GB (2x16) Kingston Fury Beast CL30 6000MT/s |
Video Card(s) | MSI GeForce RTX 3070 SUPRIM X |
Storage | 1x Crucial P5 Plus nvme m.2 SSD, 1x Crucial T500 nvme m.2 SSD |
Display(s) | Asus ROG Swift PG32UCDM (main); Asus ROG Swift PG27AQDM (secondary) |
Case | Corsair 3500X (no fan variant) |
Power Supply | Corsair RMx (2021) 1000W 80-Plus Gold |
Mouse | Varies based on mood/task; is currently Razer Basilisk V3 Pro or Razer Cobra Pro |
Keyboard | Varies based on mood; currently Razer Deathstalker V2 Pro TKL |
I bought a Crucial T500 Gen4 ssd a couple weeks ago, to be used with the ROG GenZ.2 card that comes with the Crosshair X670e Extreme. I figured that was the best way to have a secondary m.2 drive without affecting the speed of the primary PCIe x16 slot that's occupied by my 3070. In BIOS, the drive appears alongside my primary m.2 in the NVME configuration setting (I think that's what it's called anyway;I'll edit my post after taking a peek at the BIOS) but it's not being recognized by Windows. In Windows, only my primary m.2 (a Crucial P5 Plus) and my WD Blue HDD are recognized.
I bought my board used and it came with all the big accessories (the fan control box, the Gen5 m.2 x16 card, and the GenZ.2 card) but none of the little rubber m.2 pads, screws, standoffs, etc. So I scrounged around Amazon for m.2 screws/standoffs and thermal pads in order to use the GenZ.2 card and it...just ain't working. I also suspect the card might be damaged because the big heat pipe on the Gen5 side is bent to shit (the previous owner was an animal, apparently)
At this point, I'm wondering if I should just take the performance hit and install the T500 into the second slot on the board itself. Would I notice a big difference going from x16 to x8 for my GPU?
I bought my board used and it came with all the big accessories (the fan control box, the Gen5 m.2 x16 card, and the GenZ.2 card) but none of the little rubber m.2 pads, screws, standoffs, etc. So I scrounged around Amazon for m.2 screws/standoffs and thermal pads in order to use the GenZ.2 card and it...just ain't working. I also suspect the card might be damaged because the big heat pipe on the Gen5 side is bent to shit (the previous owner was an animal, apparently)

At this point, I'm wondering if I should just take the performance hit and install the T500 into the second slot on the board itself. Would I notice a big difference going from x16 to x8 for my GPU?