Post your Cinebench R23 Score

[NoJuan999]

Nice score!!!

Don't kill your chip for cinebench runs....

LOL
I won't, I only did a few R20 runs and a CPUz Validation then set it back to Auto / PBO.
I personally don't feel a need to keep it OC'd since it is pretty darn fast set on Auto.

 

[ntuason]

9900K @ 5.2Ghz on an AiO.

 

[Schmuckley]

3600X @ 4.325 Ghz on air. Gets too hot.

 

[Lindatje]

Ryzen 3600 4.4GHz

 

[droopyRO]

2700X with PBO turned off, and undervolt.

 

[NoJuan999]

3700x @ 4.35 GHz on Air (Scythe Ninja 5):

 

[EarthDog]

3700x @ 43.5 GHz on Air (Scythe Ninja 5):

View attachment 147146

I'd expect a better score at 43 GHz..

 

[NoJuan999]

I'd expect a better score at 43 GHz..

LMAO
Posted edited.

 

[biffzinker]

2700X with PBO turned off, and undervolt.
View attachment 146285

Running the 2700X at base clockspeed is leaving a significant amount of performance unaccounted for though.

 

[droopyRO]

About 5% from what i tested.
EDIT: even less in gaming:

 

[madness777]

R5 2600 4.45GHz R15
Only managed to finish R15 with this trash 70$ board. Anything higher tripped it.
Custom watercooling with open window. About 5°C outside

 

[Arctucas]

Some improvement over my previous PB of 5826.

 

[AlexGeForce]

Intel Core i9-10900X (Cascade Lake-X) @ 5,0 GHz Core voltage 1.38V
ASUS PRIME X299-DELUXE II (BIOS 3306) Clock Generator 104.2 MHz
ROG RYUJIN 360
32Gb (4 x 8Gb in 4 channel) Corsair Dominator Platinum CMT16GX4M2C3600C18 @ 4GHz 18-21-21-40-1T
EVGA GTX 1080 Ti Founders Edition (Core 192 MHz; RAM 560MHz)
Seasoniс SS 850KM (ver.1)
Samsung 970 PRO M.2 1TB
Thermaltake P7
Philips 46PFL9706H TV
Audio: MOTU 16A (Thunderbolt 3 to 2 converter)
Windows 10 Pro 64 bit, release 1909

 

[phanbuey]

Intel Core i9-10900X (Cascade Lake-X) @ 5,0 GHz Core voltage 1.38V
ASUS PRIME X299-DELUXE II (BIOS 3306) Clock Generator 104.2 MHz
ROG RYUJIN 360
32Gb (4 x 8Gb in 4 channel) Corsair Dominator Platinum CMT16GX4M2C3600C18 @ 4GHz 18-21-21-40-1T
EVGA GTX 1080 Ti Founders Edition (Core 192 MHz; RAM 560MHz)
Seasoniс SS 850KM (ver.1)
Samsung 970 PRO M.2 1TB
Thermaltake P7
Philips 46PFL9706H TV
Audio: MOTU 16A (Thunderbolt 3 to 2 converter)
Windows 10 Pro 64 bit, release 1909

View attachment 147551

Maaaan this is 24/7? or just benching?

 

[AlexGeForce]

Maaaan this is 24/7? or just benching?

14/5

 

[oxrufiioxo]

Maaaan this is 24/7? or just benching?

I was actually kinda surprised even at 5ghz it loses to a 3900X by 700 points at stock.

 

[Mr.Scott]

 

[phill]

@Mr.Scott it's just awesome because it's an SR-2 but those jigawatts........

Side question, how have you managed to get 10Gb of RAM in the build??

 

[Mr.Scott]

@Mr.Scott

Side question, how have you managed to get 10Gb of RAM in the build??

Interesting. I didn't notice that. There is actually 12 GB.
Must have a stick or slot that needs to be cleaned up. You just turned my OCD on.

 

[phill]

Many apologies @Mr.Scott I hope it's just not showing it in CPU-Z... I have seen that happen a few times but have no idea why... As long as the bios shows 12Gb, then CPU-Z is just drunk and needs to go home....

 

[j0taDasFestasPT]

 

[Mr.Scott]

Many apologies @Mr.Scott I hope it's just not showing it in CPU-Z... I have seen that happen a few times but have no idea why... As long as the bios shows 12Gb, then CPU-Z is just drunk and needs to go home....

Bios and windows both show 12 gig.

 

[phill]

Bios and windows both show 12 gig.

It's just CPU-Z being a bit special then thank god

 

[CyDone]

My new RyZen 3700x @ 4.4GHz on 1.375v

 

[NoJuan999]

My new RyZen 3700x @ 4.4GHz on 1.375vView attachment 147746

Nice,
What Motherboard, cooler and RAM do you have ?

Check out my 3700x score here:

Post your Cinebench R23 Score

Nice score!!! Don't kill your chip for cinebench runs.... LOL I won't, I only did a few R20 runs and a CPUz Validation then set it back to Auto / PBO. I personally don't feel a need to keep it OC'd since it is pretty darn fast set on Auto.

www.techpowerup.com