- Joined
- Aug 13, 2013
- Messages
- 80 (0.02/day)
To view this case mod, go here.
Specs:
Intel Core i9 9900kASUS ROG Strix Z370-iSamsung 970 Pro m.2 512GB32GB (16x2) Corsair Dominator Platinum 3200mhzCooler Master V850 850WNvidia RTX2080 TiRaijintek Ophion Evo
Mods:
Modified mid panel to accomodate large PSUInside mods to fit custom water loopFabricated custom decal panel for AIO pumptopSanded/brushed all motherboard heatsinksSanded/brushed RAM heatspreader bars
Hey guys!Here is a gallery for this pocket rocket PC that I forgot to post after it was completed.This is the Raijintek Ophion Evo. An SFF chassis that has extended height when compared to the standard Ophion chassis. This extra height can accommodate a 240mm AIO CPU cooler.I did some modifications to the internals of this chassis so that I could shoe-horn in a custom loop for the CPU. This was achieved with the help of reusing on old Fractal Design Kelvin AIO CPU/Pump block from an old project.Other mods include removing the anodiozing from the motherboard VRM heatsinks, and then brushing them with sandpaper. I also did the same with the Corsair Dominator Platinum heatsinks as well. These brushed elements which are combined with the CPU/Pump plate that I created before all tie in nicely together.Some custom black sleeved cables tie everything in nicely together.
Specs:
Intel Core i9 9900kASUS ROG Strix Z370-iSamsung 970 Pro m.2 512GB32GB (16x2) Corsair Dominator Platinum 3200mhzCooler Master V850 850WNvidia RTX2080 TiRaijintek Ophion Evo
Mods:
Modified mid panel to accomodate large PSUInside mods to fit custom water loopFabricated custom decal panel for AIO pumptopSanded/brushed all motherboard heatsinksSanded/brushed RAM heatspreader bars
Hey guys!Here is a gallery for this pocket rocket PC that I forgot to post after it was completed.This is the Raijintek Ophion Evo. An SFF chassis that has extended height when compared to the standard Ophion chassis. This extra height can accommodate a 240mm AIO CPU cooler.I did some modifications to the internals of this chassis so that I could shoe-horn in a custom loop for the CPU. This was achieved with the help of reusing on old Fractal Design Kelvin AIO CPU/Pump block from an old project.Other mods include removing the anodiozing from the motherboard VRM heatsinks, and then brushing them with sandpaper. I also did the same with the Corsair Dominator Platinum heatsinks as well. These brushed elements which are combined with the CPU/Pump plate that I created before all tie in nicely together.Some custom black sleeved cables tie everything in nicely together.