- Joined
- Oct 18, 2024
- Messages
- 11 (0.30/day)
| System Name | Office case + Dremel = gaming |
|---|---|
| Processor | Ryzen 5 3600 |
| Motherboard | Asus Prime b450m-A II |
| Cooling | Thermalright Assassin X 120 SE |
| Memory | Corsair Vengeance 2x8+2x16=48GB 3600 Mtps |
| Video Card(s) | Msi Aero OC Gtx 1080ti |
| Storage | crucial nvme ssd 1 tb pcie 3.0 |
| Display(s) | Minifire 180hz Full HD IPS |
| Case | Asus Aspire m3201 |
| Audio Device(s) | xbox wireless headset (over usb) |
| Power Supply | MSI MAG A650BN 650w non-modular |
| Mouse | TMKB M1SE (Pink) |
| Keyboard | TMKB T98SE (Brown tactile switches) |
| VR HMD | Oculus quest 2 |
| Software | windows11 |
| Benchmark Scores | P106-90 6GB in Steel Nomad: 550 (Vega 8 for display out) |
I‘m was running mine os, which is based on turnkey, on a fairly old hdd. I decided I wanted to clone it to a newer and bigger ssd.
I initially tried clonezilla, but I couldn’t get it to work. So I did a forensic sector copy in macrium reflect and then expanded the partition to the full size with gparted.
The issue is, the hdd was cloned as if it were full and on the new ssd the total storage the hdd had is now displayed as being used. I read about using fstrim to discard the unused blocks, but I couldn‘t find anything about how to do this, specifically for my os. Additionally I’m fairly new to linux, so the more general or technical explanations didn’t really help me.
Note: I know for a fact the hdd wasn’t actually full.
Does anyone have experience with this, or have a different suggestion?
Thanks in advance ( :
I initially tried clonezilla, but I couldn’t get it to work. So I did a forensic sector copy in macrium reflect and then expanded the partition to the full size with gparted.
The issue is, the hdd was cloned as if it were full and on the new ssd the total storage the hdd had is now displayed as being used. I read about using fstrim to discard the unused blocks, but I couldn‘t find anything about how to do this, specifically for my os. Additionally I’m fairly new to linux, so the more general or technical explanations didn’t really help me.
Note: I know for a fact the hdd wasn’t actually full.
Does anyone have experience with this, or have a different suggestion?
Thanks in advance ( :