Dustin Porter
New Member
- Joined
- Nov 1, 2014
- Messages
- 2 (0.00/day)
I have built a few of these desks. And each time I have upgraded and learned from mistakes. This something I love doing. I love computers and I love wood working. I use to build houses and desks so I have learned a few things
I started out with 2 sheets of MDF board.
First, screwed top and mid section together to make sure the hole was the same size
Time to build the sides, backs, and fronts.
A digital picture frame was going to show desk name but decided not to install that there.
I lost many pictures due to HDD crashing. But built the box connected to top piece.
Glue the inner trim down. The glass will sit on that
Made a mount for Picture frame
Project was put on hold for a little while.
Cut 4 1/4 inch holes for 120mm fans.
That tan thing was a support in a kids play table i found.
cut it up to fit a 12 inch neon behind
Mounted the box/top to the bottom of the desk and realized what I did wrong
So I did what I could to make it work
Now it starting to look like a desk
Time for some paint
I bought the wrong trim but I made it work. I think it came out great
Custom switch panel
Again, I have lost many pictures but here it is with hardware inside.
Doesn't look too bad.
Im sorry again for the lack of pictures. here is the desk up and running and there is more to come.
Modded a sealed loop to cool it and got some new hardware. I have a few pictures of the desk as it sits right now.
And this monster still is not finished. But for now She looks damn good.
New build coming soon.
Thank you looking
I started out with 2 sheets of MDF board.
First, screwed top and mid section together to make sure the hole was the same size
Time to build the sides, backs, and fronts.
A digital picture frame was going to show desk name but decided not to install that there.
I lost many pictures due to HDD crashing. But built the box connected to top piece.
Glue the inner trim down. The glass will sit on that
Made a mount for Picture frame
Project was put on hold for a little while.
Cut 4 1/4 inch holes for 120mm fans.
That tan thing was a support in a kids play table i found.
cut it up to fit a 12 inch neon behind
Mounted the box/top to the bottom of the desk and realized what I did wrong
So I did what I could to make it work
Now it starting to look like a desk
Time for some paint
I bought the wrong trim but I made it work. I think it came out great
Custom switch panel
Again, I have lost many pictures but here it is with hardware inside.
Doesn't look too bad.
Im sorry again for the lack of pictures. here is the desk up and running and there is more to come.
Modded a sealed loop to cool it and got some new hardware. I have a few pictures of the desk as it sits right now.
And this monster still is not finished. But for now She looks damn good.
New build coming soon.
Thank you looking