Show Us Your Computer Workbench

[Hankieroseman]

Converted Cargo Furniture to TV Stand/Sock and underwear drawers to my mobile computer workbench and toolbox spare stuff drawers.

 

[Gunbound]

I like the toolbox.... simple cozy and very relatable. Dunno about the workbench. I thought computer workbenches consisted of a mount of some sort for MB/PSU and lack of chassis?

 

[freeagent]

I use an end table that is beside my TV stand, it only holds my tower, my screw driver, an assortment of fans to suit the mood, CPU, and right now I am sitting on almost 60g of TIM.

Got sick of running out.. wont run out for a few years now

Edit:

A pic will have to wait.. I have to dust.. it gets everywhere with these fans lol

 

[Ruru]

No room for such (I live in a 32m2 apartment) so I tinker with hardware on the floor.

 

[freeagent]

No room for such (I live in a 32m2 apartment) so I tinker with hardware on the floor.

I miss my hardwood floor, but like the house better so.. tradeoffs

 

[Fokker]

The closest thing I have to workbench at the moment and it's a bit of a mess with the printers taking up most of the space. That'll change once I get more stuff moved.

 

[gurusmi]

No room for such (I live in a 32m2 apartment) so I tinker with hardware on the floor.

It's not a question of the size. It's a question of the organization.

I also live actually in a 35m² barrier free one-room apartment (I have to use a wheelchair). But i have a big (200x75cm) workdesk. Additionaly a second side desk with a size of 120x60cm for my 3D Printer and additional machines.I have a full living area, a kitchen and a bathroom.

 

[Ruru]

It's not a question of the size. It's a question of the organization.

I also live actually in a 35m² barrier free one-room apartment (I have to use a wheelchair). But i have a big (200x75cm) workdesk. Additionaly a second side desk with a size of 120x60cm for my 3D Printer and additional machines.I have a full living area, a kitchen and a bathroom.

I have a couch as well which takes the space where I would have a second desk. Trust me, I had a second desk before.

 

[Outback Bronze]

It's a bit messy atm, hopefully clean it up over the xmas break

 

[Arctucas]

I do my assembly on the dining room table.

 

[FoulOnWhite]

here's mine, watching 2 broke girls, have a thing for kat dennings. desk is not tidy but 'shrug'

 

[theouto]

It's a bit messy atm, hopefully clean it up over the xmas break

You are absolutely living up to your name

 

[Outback Bronze]

You are absolutely living up to your name

lol wait until you see the colour of my skin,
its bronze… Thats living and working outside in a bloody hot state down under. We just got through three days of 40 degress +

 

[1100R]

Classic desk, adapted to technological use. All retractable when not in use.

 

[Hankieroseman]

I like the toolbox.... simple cozy and very relatable. Dunno about the workbench. I thought computer workbenches consisted of a mount of some sort for MB/PSU and lack of chassis?

I keep looking at one of those but can't pull the trigger

 

[Arctucas]

I thought this was about workbenches, not computer desks?

 

[Steevo]

I still use the kitchen table or floor depending.

 

[Hankieroseman]

I thought this was about workbenches, not computer desks?

I used to do all my work on my big fancy, wooden, too damn heavy to move, L-desk but my wife run me out with the $#@+ she watches on TV so I have a small bedroom that is my simulator room with beer fridge and my work benches. Have a nice adjustable standup table that holds the 57 inch monitor. Barely leaves room for a computer. It would be real nice if I could use it. Hard to find a spot for 32 inch x 14 inch footprint and 5 feet of clearance.

 

[stinger608]

Don't have a picture of it;

But, I built a 24 inch X 16 foot bench in the basement.

It's currently just the plywood top, but going to install a thin rubber over the entire surface.

 

[Hankieroseman]

Don't have a picture of it;

But, I built a 24 inch X 16 foot bench in the basement.

It's currently just the plywood top, but going to install a thin rubber over the entire surface.

I made one of those w/casters for my be quiet! Dark Base 902 r.2 case. Didn't like it. Now the beer fridge sits on it.

 

[onemanhitsquad]

Mine is in the back of our "arcade room"... I put up some plexiglass pieces to protect the walls from rotating case jabs and damage... a NUC skull canyon and 4k monitor for reference materials or watching TV while working (easily cleared when needing more space) . Supplies and spare parts are binned up behind as I got tired of walking to the garage to find something. Merry Christmas and any other holidays that are yours!

I do my assembly on the dining room table.

where ever...when ever!

 

[Hankieroseman]

Mine is in the back of our "arcade room"... I put up some plexiglass pieces to protect the walls from rotating case jabs and damage... a NUC skull canyon and 4k monitor for reference materials or watching TV while working (easily cleared when needing more space) . Supplies and spare parts are binned up behind as I got tired of walking to the garage to find something. Merry Christmas and any other holidays that are yours!

View attachment 377062View attachment 377063View attachment 377064View attachment 377066View attachment 377067


where ever...when ever!

That appears a small footprint stand for the big Samsung. How's that working for you? Is it mounted?

 

[onemanhitsquad]

That appears a small footprint stand for the big Samsung. How's that working for you? Is it mounted?

it has an Ergotron vesa mount holding the bulk of the weight and the ends are touching ever so lightly on the desk ends for balance , it has worked great for quite awhile.

 

[Fouquin]

It's a bit messy atm, hopefully clean it up over the xmas break

View attachment 376984

You and I have very different definitions of "messy". My bench is a disaster zone compared to yours.

 

[Bones]

Not the biggest or fanciest but gets the job done for what I do.

I've upgraded the monitor since this pic was taken so the books are no longer there.