- Joined
- Aug 30, 2020
- Messages
- 285 (0.18/day)
- Location
- Texass
| System Name | 1.EXTREME-FLIGHT SIM |
|---|---|
| Processor | 1.AMD RYZEN 7 9800X3D 4.7GHZ 8-core 120W |
| Motherboard | 1.ASUS ROG X670E Crosshair EXTREME BIOS V.2506 |
| Cooling | 1.be quiet! Silent Loop 2 360MM, Light Wings 120 & 140MM |
| Memory | 1.G. SKILL Trident Z5 RGB 32MBx2 DDR5-6000 CL32/EXPOⅡ |
| Video Card(s) | 1. ASUS ROG Strix RTX4090 O24 |
| Storage | 1.2TB CRUCIAL T705 M.2, 4TB Seagate FireCuda 3.5"x7200rpm |
| Display(s) | 1.Samsung Odyssey Neo G9 57" 5120x1440 120Hz DP2.1 2.Ulrhzar 8" Touchscreen(HUD) |
| Case | 1.be quiet! Dark Base Pro 900 Rev.2 Silver |
| Audio Device(s) | 1.ROG SupremeFX ALC4082, Creative SoundBlaster Katana V2 |
| Power Supply | 1.be quiet! Dark Power Pro 12 1500W via APC Back-UPS 1500 |
| Mouse | 1.LOGITECH Pro Superlight2 and POWERPLAY Mouse Pad |
| Keyboard | 1.CORSAIR K100 AIR |
| Software | 1.WINDOWS 11 x64 PRO 23H2, MSFS2020, DCS |
Want to add the PULL to my PUSH fan arrangement of my top radiator adding 3x120MM fans. These be quiet! fans are rubber grommet insulated and need those special mounting screws. The cover will be modified for clearances at some point but I'm looking at this modder's mods. It might be worth $100. I think I could use a little more cooling. Maybe this room won't get so hot or it could get worse. The MoBo heatsinks were a clearance issue that prevented both fans and radiator fitting on the inside. Constructive criticism and ideas y'all. Trying to locate those screws now. #8x32 tpi x 1 & 3/16" SHOULDER screws.
Attachments
-
RADIATOR TOP CLEARANCE.jpg -
Clearance_44mm.jpg -
Screenshot 2024-12-02 133851.png -
gTYWY5d.jpg