• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

why i can't have acces to multiplier field?

Joined
Oct 27, 2023
Messages
78 (0.19/day)
cheers to comunity,
I have an dillema..Why i can't SET Multiplier?The program itself won't let me to check,and i want to set that field to ONLY 20 not 25. Is there any way to have accses tot that field?
I try to use Intel Extreme Tuning utility too and that program won't let me either... :(
I want to downcloack my processor from 2.6 GHZ stock speed to 2.2 or even 2.0 Ghz because in games demanding like Stalker 2, it goes up to 95 degree and is very dangerous. I want to cool down a bit .I want 85 degree max. on CPU if is possible....
thanks in advance for any advice
 

Attachments

  • throttle.jpg
    throttle.jpg
    260.9 KB · Views: 17

unclewebb

ThrottleStop & RealTemp Author
Joined
Jun 1, 2008
Messages
7,964 (1.32/day)
Why i can't SET Multiplier?
Your CPU is using Speed Shift Technology (SST) so Set Multiplier is no longer used. Adjust Speed Shift Max in the TPL window instead of Set Multiplier.

If you have an overheating problem then you need to fix that. Time to repaste with Honeywell PTM 7950.

95C is not dangerous. It is a normal operating temperature for an Intel CPU.
 
Joined
Oct 27, 2023
Messages
78 (0.19/day)
i set to 20.By default it was 45.I check temp in Stalker 2 now .maybe drop under 90 degree now :(
thanks so much

p.s
thanks again.if i set to 2000mhz,the fps drop to 45 but the temp is resonable to 74 degree,if i set to stock speed 2600 mhz the fps is near 60 but the temp is going to over 90 degree...,and if not use throttle stop program ,the temp si going to over 95 degree sometime is reach 96 and MSi Afterburner warning me the limit temp is exceed....
 

Attachments

  • test.jpg
    test.jpg
    257.1 KB · Views: 4
  • 1.jpg
    1.jpg
    256.7 KB · Views: 3
  • 2.jpg
    2.jpg
    434.1 KB · Views: 3
Last edited:

unclewebb

ThrottleStop & RealTemp Author
Joined
Jun 1, 2008
Messages
7,964 (1.32/day)
Post a picture of the FIVR window. Most people use ThrottleStop to lower the CPU voltage. This is the best way to lower heat. There is no loss in performance when you undervolt.
 
Top