Hi,
I bought an used RX 570 8GB with a broken fan some days ago and I have problems getting it to work after I replaced the fans. The fan starts to spin in BIOS but stops soon after and I wont get a signal or recognition from it. I suspected a miner bios on it when it didnt recognize as an AMD-card by the drivers. I was able to flash it using the ATI-flasher tool i found here on the site with the bios also from here with success, however I still cant get it to work. When I use the internal graphics with the card in the mobo, the fans usually actually spin fully and I've tried to factory reset it when the amd driver suite finally recognized the card after a bios flash, but to no avail as when I plug my monitor into the card, the fans stop at boot and I get the error code 43 error. (I am also unable to go around that error with the patcher i found). The switch beside the 8 pin doesnt really do anything either.
There's also a weird wet patch (photos) that might have something to do with it?
I've tried both the Micron and Hynix (memory says Hynix under heat sink) bios for the XXX version, but now I cant seem to find them again in your bios collection. I've checked the other threads about this card but I cant seem to solve it through the steps there
Any clues?
I bought an used RX 570 8GB with a broken fan some days ago and I have problems getting it to work after I replaced the fans. The fan starts to spin in BIOS but stops soon after and I wont get a signal or recognition from it. I suspected a miner bios on it when it didnt recognize as an AMD-card by the drivers. I was able to flash it using the ATI-flasher tool i found here on the site with the bios also from here with success, however I still cant get it to work. When I use the internal graphics with the card in the mobo, the fans usually actually spin fully and I've tried to factory reset it when the amd driver suite finally recognized the card after a bios flash, but to no avail as when I plug my monitor into the card, the fans stop at boot and I get the error code 43 error. (I am also unable to go around that error with the patcher i found). The switch beside the 8 pin doesnt really do anything either.
There's also a weird wet patch (photos) that might have something to do with it?
I've tried both the Micron and Hynix (memory says Hynix under heat sink) bios for the XXX version, but now I cant seem to find them again in your bios collection. I've checked the other threads about this card but I cant seem to solve it through the steps there
Any clues?
Attachments
-
119444978_3152724424853587_5053885470987160237_n.jpg189.6 KB · Views: 620
-
119468092_740238323204325_5532448687996384524_n.jpg306.8 KB · Views: 546
-
119466531_664872857793227_391852228376353197_n.jpg215.2 KB · Views: 918
-
119469181_338992570662837_7723439444613457015_n.jpg207.8 KB · Views: 1,146
-
119388173_612883849395830_4448367958349999979_n.jpg249.5 KB · Views: 556
-
119505124_993945474458803_4421369994361586343_n.jpg265.5 KB · Views: 779
Last edited: