Addonics Technologies today announced a family of adapters for NVMe 2.5" U.2 SSDs, which ensure full READ/WRITE speed by directly connecting the SSD to a 4-lane PCIe 3.0 slot. The family includes NVMe 2.5" U.2 SSD PCIe adapter; SFF-8643 PCIe 4X adapter, and M2 SFF-8643 converter. The NVMe 2.5" U.2 SSD PCIe adapter is a PCIe 4X add-on-card with a 68-pin SFF-8639 female connector on board to directly connect a NVMe 2.5" U.2 SSD to a PCIe 4-lane slot. No cables are needed. It is a simple solution for installing the U.2 SSD into desktop or server equipment.

The SFF-8643 PCIe 4X adapter is designed for connecting the high performance 2.5" NVMe U.2 (SFF-8639) SSD to a PCIe 4-lane slot in a system via a SFF-8643 cable, which allows installation of U.2 SSDs into various types of drive bays. The adapter is a flexible solution for installing NVMe U.2 SSDs into standard height or low profile systems. The M2 SFF-8643 converter is a small adapter that is designed to install into a M2 PCIe SSD socket and turn it into a SFF-8643 connector. This converter enables the NVMe 2.5" U.2 SSD to be attached to the system PCI BUS via a M2 PCIe SSD socket using the SFF-8639 to SFF-8643 cable.

Addonics Technologies today announced the Addonics 2.5 inch Disk Array, a high density removable hard drive system that allows you to install up to six 2.5 inch SATA/ hard drives or SSD's into one standard 5.25 inch drive bay. Its compact form factor makes the Addonics Disk Array an ideal solution for mounting large numbers of 2.5" HDD or SSD into small computers, mini ATX systems or for applications that require a lot of storage in a very small footprint.

By using Addonics' family of 2.5 inch flash drive kits, various form factor SSDs such as CFast, mSATA, M2 or CF can be easily loaded into this Disk Array, creating a large capacity, low power and shock resistant solid state storage system. The removable drive tray is designed to allow users to conveniently load drives into the Disk Array without any mounting screws. For mobile applications or installation in environments with frequent shock and vibration, the drive can be secured to each drive tray with mounting screws to prevent drive movement. Each drive slot is equipped with its own power and drive access LEDs as well as a latch on the drive tray to secure each hard drive in the Disk Array unit.

Addonics Technologies today announced a rack-mount SATA to USB 3.1 Converter, which allows users to turn any SATA device into the latest SuperSpeed+ USB 3.1 storage.

When connected to a USB 3.1 port, the converter can deliver data throughput up to 10 Gbps. This effectively doubles the speed of USB 3.0 and is 20 times faster than USB 2.0. Since it is backward compatible with previous USB standards, any SATA hard drive, SSD (Solid State Drive), and even optical drives can easily be converted into USB 3.1 storage. It comes mounted on a SCIS-I bracket, which means it can easily be mounted onto any storage enclosure with a standard SCSI-1 (Centronic 50) cut out. It can be mounted on a standard desktop computer chassis by using an optional PCI mounting bracket.

Addonics Technologies today announced the Addonics USB 3.1 PCIe controller, a simple and economical solution for adding the latest high speed 10 Gbps USB 3.1 port to desktop computers or servers.

Designed to install into any PCI-Express 2X slot, the USB 3.1 controller can handle data rates up to 10 Gbps on the PCIe 2.0, doubling the speed of USB 3.1.
One of the key features is a maximum speed of 10 Gbits/sec, which is twice the speed of USB 3.0 and 20 times the speed of USB 2.0. It is capable of SuperSpeed (10 Gbps, 5Gbps), HighSpeed (480 Mbps), FullSpeed (12 Mbps), and LowSpeed (1.5 Mbps) transactions.

Addonics Technologies today announced the Addonics UDD25, a family of four reader/writers for 2.5-inch HDD / SSD, M2 card, mSATA SSD, CFast card or CF cards. The series provides fast data transfer rates of up to 6 Gbps in both internal and portable versions, including write-protected models that support read only.

The portable Addonics Pocket UDD25 and Addonics Internal UDD25 can Read/Write to 2.5" SATA HDD/SSD or storage media with same dimension and connectors of a standard 2.5" SATA HDD. The Internal UDD25 is designed to mount directly into a standard 3.5-inch drive bay. Both models can connect to any system via a SATA or USB 3.0 / 2.0 port.

Addonics Technologies today announced the Internal GigaNAS Adapter, a simple, powerful and inexpensive solution for custom building your own high capacity network attached storage system, including private cloud storage.

The new adapter is designed to mount into a PCI slot of a desktop computer, server or a storage chassis with a centronic 50 connector cutout. With two SATA ports and one USB port, the new adapter allows you to share up to 16 hard drives over a LAN with as much as 16 TB per drive volume and up to 85 MB/sec. transfer rate over a 1G network at a fraction of the cost of many existing NAS solutions.

Addonics Technologies (www.addonics.com) today announced the M2/SSD/HDD Duplicator -- a family of high-speed duplicators designed for making multiple copies of M2 (NGFF) SSD or 2.5" SATA HDD/SSD media from a single master drive. Each duplicator comes bundled with a 2.5" M2 (NGFF) flash drive kit that turns a M2 (NGFF) card into a 2.5" SATA SSD. You can mix and match the M2 (NGFF) SSD, 2.5" SSD or standard SATA hard drives into the duplicator, which makes it a handy tool for transferring content between multiple media formats.

There is no computer needed or complex software required to operate any Addonics duplicator. Just open the doors on the drive bays, load the master media into the source bay and the target media of capacity equal or larger into the target bays, lock the drive doors and push the start button to start the copying process. Designed with snap-in drive bays, drives can be easily added or removed without any special tool, just like an ordinary cassette tape.

Addonics Technologies today announced the 6G RAID Tower family of external storage solutions, which connect multiple drives to any system at 6Gbps speed. Prices start at $189. The new Addonics solutions are ideal for video storage or large data applications. They are a simple way to expand the storage capacity of servers or any computing equipment with terabytes of storage space without sacrificing the full speed capability of the high performance hard drive or SSD.

Depending on the model, as much as 60 terabytes can be installed into one 6G RAID Tower. With the exception of the RAID Tower Mini, which uses a simple screw mount, drives are added or removed like tape cartridges from each drive bay without any special tools.

Addonics Technologies today announced the Sapphire 5-slot CFast drive and the Sapphire CF, a family of four flash drive solutions, which are ideal for creating your own SSD (solid state drive) RAID array to improve storage performance. The new line lowers power consumption and improves overall system reliability for application environments with frequent shocks and vibrations because SSDs have no moving parts unlike traditional hard drives.

The Sapphire 5-slot CFast drive is for CFast media. The Sapphire CF is for CF. Both offer a flexible platform with USB 3.0 or eSATA interfaces for creating your own SSD storage solution using commercially available high-speed CFast cards.

Addonics Technologies today announced two new members of its Port Multiplier family, both designed to support SATA 3.0 6 Gbps and greatly enhance the storage capabilities for a wide range of computer systems.

The new products are the Internal 5-port 6G Port Multiplier, which is an excellent solution for adding more drives to a computer that has limited SATA ports, and the 5-Port 6G Rack Mount Port Multiplier, which has more flexibility for large volume storage needs. As many as five hard drives, SSD or optical drives can be connected to these PMs. The hard drives or SSD drives appear as five individual drives when connecting to a Port Multiplier compatible controller. The drives can also be set up as a RAID group using the RAID software of the OS or the host controller.

Addonics Technologies today announced a network device for the wireless sharing of a USB drive or micro SD card or for using as a wireless hot spot for connecting wireless devices to the internet.

The WiFi Drive Adapter is ideal for numerous applications, including wireless file sharing on USB drives or micro SD cards, streaming music or video to a tablet, smart phone, MP3 player or notebook PC. Set up is fast and easy. Simply attach a USB drive or insert a micro SD card into the WiFi Drive Adapter. The data on the USB drive or the micro SD card becomes readily accessible wirelessly.

Addonics Technologies today unveiled the Sapphire Snap-In Disk Array, a high performance external storage device family that is easily expandable with RAID capability. The Sapphire Disk Array is a great portable storage solution for a wide range of applications that demand high performance and large amount of storage in the field.

The new product comes in a choice of models equipped with different interfaces for fast external storage performance via an eSATA, SuperSpeed USB 3.0, or a mini SAS connection. The Sapphire Disk Array allows users to hot swap up to four SATA 2.5-inch hard drives, SDDs, just like using a tape cassette. The four drives can be set up as four individual drives or a large volume and high performance RAID group with redundancy for reliability. On the model that comes with USB 3.0 connections, the four drives can also be instantly turned into a network attached storage (NAS) solution for sharing data over the network by attaching to the optional Addonics NAS 4.0 adapter.

Addonics Technologies today announced an internal and external reader/writer that allows you to use mSATA SSDs or CFast cards as removable media on any computer. Both solutions ensure maximum performance from mSATA or CFast media to simplify the task of transporting files from digital cameras, mobile devices, notebook and desktop PCs at read/write speeds of 5,000 mbps (USB 3.0) or 6,000 mbps (SATA/eSATA).

The Addonics External Reader/Writer comes bundled with mSATA and CFast adapters. The adapters convert the mSATA or the CFast media into a 1.8" micro SATA storage device that can be inserted into the open slot of the Reader/Writer. Designed to be powered directly from the USB port or eSATA/USB combo ports, the Reader/Writer connects to any system via eSATA or USB 3.0 and is plug-n-play with no software drivers to install.

Addonics Technologies today announced the Addonics Cipher RAID Rack and the Cipher RAID Tower, two RAID Storage solutions with AES 256-bit hardware encryption for high capacity storage. Both products are ideal for securing large volumes of sensitive information, data archiving or video recording. The Addonics 1U Cipher RAID Rack is designed to accommodate up to four 3.5" SATA hard drives in a 1U Rack mount chassis. The Cipher RAID Tower accommodates up to five 3.5" SATA hard drives in a 4-bay lightweight sturdy aluminum chassis for easy transportation.

Both units, which are operating system independent, connect to systems via a single eSATA or USB cable to a USB 3.0 or 2.0 port. Both Cipher RAID storage solutions come integrated with bullet proof, highly secure AES 256-bit full disk hardware encryption that is simple to use. There is no software to install or special training required. The encryption and description are activated by a simple insertion of a cipher key, similar to opening a door with a key. The FIPS certified hardware crypto engine integrated inside the Cipher RAID Tower ensures maximum performance of the hard drive. Data is encrypted and decrypted on all drives simultaneously on the fly, totally transparent to the user.

Addonics Technologies (www.addonics.com) today announced the Mini HDD Duplicator Station, a compact storage device that is about the size of a desktop computer power supply.

The feature rich storage device is designed to be used as a simple 1:1 HDD/SSD duplicator or as a fast USB 3.0 docking device for up to two SATA hard drives. It is a convenient tool for transferring data between different types of hard drives and flash memory cards as well as for cloning hard drives or making back up hard drives. It operates silently without the need for a cooling fan.

Identity theft is something many students take for granted until it happens to them. Laptops and notebook computers are a potential gold mine for thieves unless you encrypt your data, according to Addonics Technologies. The CipherUSB from Addonics provides a simple and inexpensive way to encrypt data stored on flash drives, flash media, USB hard drives as well as Blu-ray, DVD or CD media.

A student's mobile device may include your resume, transcripts, school or internship applications, or financial records? Equally, administrators who use a laptop for their job, may have files such as human resources records, student applications, transcripts, research data or payroll information stored on their system. Should your laptop be lost or stolen, you want the data inside to be electronically inaccessible.

Addonics Technologies today announced the Addonics 2.5" and 3.5" Snap-In Disk Array removable drive systems that are ideal solutions for increasing hard drive storage in both small and large computing systems.

The Addonics 2.5" Snap-In Disk Array is a high density removable hard drive system that supports installing up to four 2.5" SATA hard drives or SSDs into one standard 5.25" drive bay. This compact form factor makes it an ideal solution for increasing hard drive storage in small computers, mini ATX systems or for applications that require a large number of drives.

Addonics Technologies today announced the 5-port HPM-XU, a feature-rich hardware port multiplier (HPM), which connects up to five SATA hard drives to high speed eSATA or the latest SuperSpeed USB 3.0 ports on any system via a single eSATA or USB cable. Addonics also unveiled a family of RAID storage solutions that integrate with its HPM. The new port multiplier comes with built-in RAID accelerator and supports sustained transfer exceeding 240 MB/sec with 5 drives in RAID 5 configuration.

The 5-port HPM-XU will benefit anyone wanting to attach numerous hard drives to desktops or servers as individual drives or as high performance RAID volumes with redundancy. You can also connect five SATA optical drives, such as DVD-RRW or Blu-ray drives, to your system and do simultaneous data copying. The device supports all current versions of Windows, Mac OS X and above, Linux kernel 2.4 and above, and Mac OS X 10.4.x.
The 5-Port HPM-XU fits perfectly inside the Addonics family of tower and rack storage products, plus many standard multi-bay enclosures with a standard SCSI-1 connector cut out.

Addonics Technologies today announced the Addonics 1:11 HDD (Hard Disk Drive) Duplicator, which can copy up to 11 target drives from a single source or duplicate any SATA or IDE HDD drive in a 3.5" or 2.5" form factor. The HDD duplicator is an ideal solution for production or data distribution applications.

The 1:11 HDD duplicator comes in three different models and operates as a stand alone device. No computer or complex software is needed. Simply insert the master drive into the source slot and then insert up to 11 hard drives of equal or larger capacity than the master drive into the duplicator slots. Press the "copy" button on the LCD control module to start the copying process. The 1:11 HDD duplicator supports a maximum copy speed of 300 MB/sec.

Addonics Technologies, announced a very small storage appliance which, despite being the size of a four inch cube, packs the power and features of RAID storage devices that are much larger and up to three times as expensive. Called the Compact RAID, the unit accommodates up to five 2.5", 9.5 mm height hard drives or SSDs to form high performance storage configurable to various RAID levels up to RAID 5. Drives can easily be removed or added to the Compact RAID, much like a tape cartridge without special tools.

In addition to the powerful RAID engine, the Compact RAID comes built-in with a high speed eSATA connection and can deliver a screaming throughput up to 300 Mbytes/sec. The Compact RAID weighs just over a pound without drive. It also features a silent operation and the ability to be used as a boot drive or as additional storage.

Addonics Technologies has announced a family of CF Hard Drive Adapters, which allow users to replace 2.5-inch IDE/SATA hard drives with one or two less power-hungry compact flash(CF) cards. The low power and shock resistant CF media can be used on any desktop PC or notebook. Once installed, the CF appears as an ordinary hard drive to the system BIOS and operating system and can also be configured as a boot device. No special device drivers are required. The adapters are compatible with Windows, Mac, Linux and Solaris Operating Systems. The primary products in the Addonics CF adapter family include the IDE/CF Hard Drive Adapter and the SATA/CF Hard Drive Adapter. The IDE version comes with choice of single slot($24.99 MSRP) or dual slots($29.99 MSRP) to accommodate up to two CFs. The SATA version has a single CF slot and MSRP price of $35.99. The products will be available in April directly from Addonics.