Overclocking
(the correct ROP count is 160, this is a bug in GPU-Z that will be fixed in next release)
Overclocking the Radeon RX 7900 GRE is very similar to the other RX 7900 Series cards.
- To start, you have to raise the power limit to maximum, the slider ends at +15%
- Next, max out the memory clock slider, it's rather short, topping out at 2316 MHz, definitely not high enough to use the full potential of the memory chips.
- Now, also increase "Max Frequency" to maximum, which is at 2803 MHz, not much higher than the default of 2530 MHz, another artificial limitation
- At this point run a first stability test and record performance.
- Now gradually lower the maximum voltage (default is 1.05 V), until your card becomes unstable, which happened for me at 0.89 V 1.02 V, depending on the card.
- Increasing the Min Frequency slider made no significant difference in performance. This might increase power consumption though for very little actual FPS improvement.
Testing notes & interpretation- Overclocking results listed in this section are achieved with the default fan and voltage settings as defined in the VGA BIOS, power limit has been set to maximum. We choose this approach as it is the most realistic scenario for most users, while still maximizing the potential performance of the card.
- Each GPU, including each GPU of the same make and model, will overclock slightly differently based on random production variances.
- The data in this table shows comparable overclocks using identical conditions from previous TechPowerUp reviews.
- The Average GPU clock frequency reported in the table is an actual measurement of the clock speeds during 3DMark Time Spy Extreme GT1. Making a "maximum overclock" comparison just based on the "rated" clocks in GPU-Z will be inaccurate—actual frequencies is what matters.
Using these clock frequencies, we ran a quick test of 3DMark Time Spy GT1 to evaluate the gains from overclocking.