Introduction

I would like to thank Thermaltake for supplying the review sample.

Features:

• Tool-free design for easy installation
• Mechanical push-and-open front I/O cover
• Stylized X-shaped power button
• I/O panel supported 2 E-SATA,4 USB, 1 IEEE 1394 & HD Audio in/out
• Organized HDD cable management
• Sliding Motherboard tray
• Support up to 14 drive bays
• Seven 5.25" bays (slide-in to lock device)
• 7 Modularized HDD trays
• Removable HDD cage
• Adjustable PSU supporting bridge
• 10 Screwless PCI slots with preserved screw holes
• Swappable HDD modules / Fan modules
• Extra bottom space for better LCS expandability (After HDD / Fan module removed)

Specifications:

Model:	VG4000SWA
Case Type:	Super Tower
Side Panel:	Transparent window
Net Weight:	11.0 kg ; 24.2 lb
Dimension (H*W*D):	605 x 250 x 660 mm; 23.8 x 9.8 x 26.0 inch
Sliding motherboard tray:	Yes
Cable management:	Yes
Sliding hood:	Yes
Adjustable PSU bridge:	Yes
Material:	All Aluminum
Color:	Silver chassis with black mesh (Also available in black with red mesh)
Cooling System:	Front (intake) : 140 x 140 x 25mm blue LED fan, 1000rpm, 16dBA or 120 x 120 x25 mm fan (optional) Rear (exhaust) : 120 x 120 x25 mm blue LED fan, 1300rpm, 17dBA Top (exhaust) : 140 x 140 x 25mm TurboFan, 1000rpm, 16dBA or 120 x 120 x25 mm fan (optional) Bottom (intake) : Two 140 x 140 mm fans (optional) or two 120 x 120 x25 mm fan (optional) VGA (intake) : 140 x 140 x 25mm TurboFan, 1000rpm, 16dBA or 120 x 120 x25 mm fan (optional)
Motherboards:	9.6" x 9.6" (Micro ATX), 12" x 9.6" (ATX), 12" x 13" (Extended ATX)
Drive Bays:	5.25" Drive Bay - 7 3.5" Drive Bay - 1 (Convertible from one 5.25" drive bay) 3.5" Drive Bay (Hidden) - 7
Front I/O:	e-SATA connector x 2, USB2.0 x 4, IEEE 1394 Firewire x 1, HD Audio
Expansion Slots:	10

Packaging & Contents

The Thermaltake Xaser VI is labeled as a "Super Tower" case, and the box is huge. There are some color photos on the front and back of the box, and one side has some features listed.


Since this is an expensive, high-end case, it would be a shame to have it damaged during shipping. Thermaltake understands that, so they surrounded the case with some heavy foam and two sheets of heavy cardboard. Under all that is the case wrapped in a bag made out of a soft "cheese-cloth" like material.


Taped to the white bag are the manual and a small dust-cloth. Inside the case is a small white box with all the accessories and assembly parts. Included in the bag of miscellaneous hardware are the HDD mounting clips, two plastic grommets for protecting water tubing, a heavy bag full of screws and other mounting parts, as well as a very large assortment of ties and straps to help keep the cabling neat and organized.


Also included in the box is a 3.5" to 5.25" bay adapter and faceplate, a 140mm fan and mounting bracket, and an accessory drawer.

A Closer Look

Thermaltake continues to tie in the "X" design of the past Xaser line, but this time more subtly with the lines created by the windows and mesh on the side panels. The left side panel has two windows in it, and on the right the same areas are covered with black mesh. There is another version of this case that has only mesh on both sides. The front has the same black mesh included on the thick extruded aluminum door, but this time there are some chrome accents to give it even more style.


The rear of the case follows the traditional ATX layout. The top PSU area has a removable plate that allows the user to mount the PSU right-side up or upside-down. To the left of the PSU are two knock-outs for water tubing, and there are two more under the 120mm rear case fan. At the bottom of the rear there are ten PCI slots. The extra three slots are perfect for adding in those USB, Firewire or other brackets when all the slots are filled up on the motherboard.


The top of the case has more black mesh, which helps to vent the hot air out the top of the case. An unusual feature here is that the entire top slides backwards to access a small tray that can hold an MP3 player or other similar devices, or be removed and allow access to the reservoir on the optional liquid cooling system.


On the top of the case near the front is a dark-tinted plastic cover that is protected during shipping with a clear plastic film. Pushing on the right spot makes the piece lift up and out of the way to reveal the I/O panel. Thermaltake went beyond the normal amount of ports and included four USB 2.0 ports, one Firewire, two audio ports (MIC and Headset), and two eSATA ports. Below them is a large X-shaped power button which is surrounded by three shapes that will light up blue when the system is powered on. There is also a System Reset button on the right and a rather small HDD Activity LED on the left.


Behind the front door are what appear to be eleven 5.25" bays. However only the top seven are actual bays, while the bottom four are vents for an intake fan. Thermaltake chose to mimic the front bays to have a more consistent look all the way down the front panel. Each one of the removable bay covers has some open-cell foam behind the mesh, and each cover comes off by pulling it forward from the right side. At the bottom the oversized base has the Thermaltake logo on the front, and there are additional holes for changing the front door to open from the left side instead of the right. This can be done without tools, by pushing the tab in (shown in the red box on the left) and pushing it upwards. There is another pin at the top of the door that can be pushed in and down instead. With the door off, the two pins can be removed and inserted into the same place on the right side of the door, then the entire assembly can be installed back on the front of the case.


Two final things to note on the outside of the case are the large vented opening on the bottom of the case and the handle on the left side panel which has a lock to secure the hardware inside from being tampered with.