Wednesday, October 5th 2016
Enermax Announces the Revolution DUO Series Power Supplies
ENERMAX brings the dual fan PSU back to the market! REVOLUTION DUO, with 80 PLUS certification, features active ventilation for long-term system stability by adopting two patented Twister Bearing fans which create dynamic airflow with quietness. The comeback of dual-fan PSU is due to increased demand of PSU shroud cases. Although the shroud cases make users more easily to do cable management for a neat and clean build, the confined space will decrease air circulation. The ENERMAX DUOFlow design utilizes the 2nd fan to actively dissipate the hot air and make the airflow management much more effective.
REVOLUTION DUO is equipped with DUOFlow design, consisting of two ENERMAX patented Twister Bearing fans, 1* 10cm intake fan and 1* 8cm exhaust fan. Thanks to active ventilation, DUOFlow makes lower RPM of fans; the use of Twister Bearing technology also delivers a more silent cooling performance compared with regular single fan PSU .
Patented FMA technology provides extra cooling for system when need
In addition to DUOFlow design, REVOLUTION DUO is also built with patented FMA (Fan-speed Manual Adjustment) function to provide optimal cooling upon users' demand. With the default setting of FMA, two thermal-controlled Twister Bearing fans automatically adjust their speed by the system load conditions - these two fans would not spin at full speed even under full load of PSU. FMA can be activated to increase the speed of both fans simultaneously to full spinning on the basis of FMA default setting. FMA, in other words, is a turbo switch of REVOLUTION DUO to offer users turbo airflow and extra cooling .
Availability & More Product Info
REVOLUTION DUO complies with 80 PLUS Gold level standards and meets 2013 ErP Lot 6 regulations; with up to 92% efficiency in operation and less than 0.5W power consumption in standby mode. It also has comprehensive protection circuitry of OVP, UVP, OPP, OCP (+3.3V/+5V), SCP & SIP for system safety. REVOLUTION DUO is available with 3 wattages: 700W/600W/500W.
For more information, visit the product pages of the 500W, 600W, and 700W variants.
REVOLUTION DUO is equipped with DUOFlow design, consisting of two ENERMAX patented Twister Bearing fans, 1* 10cm intake fan and 1* 8cm exhaust fan. Thanks to active ventilation, DUOFlow makes lower RPM of fans; the use of Twister Bearing technology also delivers a more silent cooling performance compared with regular single fan PSU .
In addition to DUOFlow design, REVOLUTION DUO is also built with patented FMA (Fan-speed Manual Adjustment) function to provide optimal cooling upon users' demand. With the default setting of FMA, two thermal-controlled Twister Bearing fans automatically adjust their speed by the system load conditions - these two fans would not spin at full speed even under full load of PSU. FMA can be activated to increase the speed of both fans simultaneously to full spinning on the basis of FMA default setting. FMA, in other words, is a turbo switch of REVOLUTION DUO to offer users turbo airflow and extra cooling .
Availability & More Product Info
REVOLUTION DUO complies with 80 PLUS Gold level standards and meets 2013 ErP Lot 6 regulations; with up to 92% efficiency in operation and less than 0.5W power consumption in standby mode. It also has comprehensive protection circuitry of OVP, UVP, OPP, OCP (+3.3V/+5V), SCP & SIP for system safety. REVOLUTION DUO is available with 3 wattages: 700W/600W/500W.
For more information, visit the product pages of the 500W, 600W, and 700W variants.
25 Comments on Enermax Announces the Revolution DUO Series Power Supplies
i don't thing 2 fan will have the same noise level. probably gonna be louder.
i think, CMIIW, a 100mm fan will have to spin faster to achieve the same airflow like a 140mm fan.
and this 100mm-80mm duo fan setup, to get the best balanced airflow, the exhaust 80mm fan will need to have the same airflow like it's 100mm fan, so 80mm will probably have to spin faster then the 100mm too.
Also, I've had a Twister bearing fan and it's not exactly the quietest thing...
For those who don't see the point, it means you can replace the PSUs in older systems that don't have support for case fans, it means you can build systems without case fans, etc. And OFC it means better cooling for the PSU.
old = new
new = old
8-)
They used to make cool and advanced products.
Now they mostly make 30$ cases and other embarrassing low end products
And any decent PSU with one single large fan would just increase the RPM if it gets hot, such as a system with no fans, to compensate. While more than likely being quieter than this.
It's a pointless system.
Regards,
www.hardwaresecrets.com/thermaltake-purepower-430w-np-power-supply-review/
Regards,
Regards,
about dual fan.. what it matter for me is: a) inside temperature of the hottestest component ( less than 90°C or the psu will fail soon ), b) efficiency c) noise ( less than 40dB under heavy condition and less than 37dB in standard environment ) d) caps ( CapXon? no thx!, 85°C caps? only in budget psu ) e) price
waiting for a good review :-D