Tuesday, November 2nd 2021
Alphacool Announces NexXxoS HPE-45 & HPE-60 X-Flow Full Copper Radiators
Alphacool today presents the HPE-45 and HPE-60 X-Flow, the new generation of high-performance radiators from Alphacool's proven NexXxoS full copper radiator series. What is new? With the HPE series, Alphacool increases the number of cooling channels within the radiator. This change gives a significant increase in cooling performance without increasing the restriction in the radiator. Another performance-enhancing feature of Alphacool's HPE series is the high fin density. With a fin spacing of 15 or 16 FPI, it enables an optimal flow of air. If the radiator is equipped with 80 mm fans on both sides in push/pull mode, a significant reduction in water temperature is demonstrably possible compared to standard radiators.
The NexXxoS HPE-60 all-copper radiators also feature Alphacool's proven X-Flow technology. This means that the Inlets and outlets are located on the opposite sides and thus enable an easy realisation of a water circuit within a server rack. The 60 mm thick radiators can be equipped with three or four 80 mm fans per radiator side.
Alphacool NexXxoS HPE-45 Full Copper 80mm Triple Radiator
Source:
Alphacool
The NexXxoS HPE-60 all-copper radiators also feature Alphacool's proven X-Flow technology. This means that the Inlets and outlets are located on the opposite sides and thus enable an easy realisation of a water circuit within a server rack. The 60 mm thick radiators can be equipped with three or four 80 mm fans per radiator side.
- L x W x H: 286 x 80 x 42 mm
- Material cooling fins, channels & prechamber: copper
- Material outer housing: steel
- Fins per Inch: 16
- Threads: 2x G1/4"
- Fan size: 80 mm
- Fan slots: 3 one-sided / 6 double-sided
- MSRP: 93.49 €
- L x W x H: 287 x 80 x 60 mm
- Material cooling fins, channels & prechamber: Kupfer
- Material outer housing: Stahl
- Fins per Inch: 15
- Threads: 6x G1/4"
- Fan size: 80 mm
- Fan slots: 3 one-sided / 6 double-sided
- MSRP: 109.99 €
- L x W x H: 367 x 80 x 60 mm
- Material cooling fins, channels & prechamber: Kupfer
- Material outer housing: Stahl
- Fins per Inch: 15
- Threads: 6x G1/4"
- Fan size: 80 mm
- Fan slots: 4 one-sided / 8 double-sided
- MSRP: 119.99 €
9 Comments on Alphacool Announces NexXxoS HPE-45 & HPE-60 X-Flow Full Copper Radiators
Bring on the big dogs Alphacool! These little guys are cute and all but no self respecting wcer is putting 8x80mm fans anywhere near their case. Wheres the 360s and 420s?
Do you finally have something new for us or is this server only? Inquiring minds want to know :P
It stand right there that this is for server environment. For a regilar PC the nexxxos series is good enough.
Perhaps you should have read my first post?
It stand right there...eh whatever that's supposed to mean?? I specifically asked if it was for server only. HrrmmmYawn, and yes, im aware of the Alphacool NexXxoS(notice the cool spelling) rads that have been around for the last oh 15 years or so. Pay close attention to the first part of my question above. If you need clarification just ask ;)
These are industrial radiators for server cases. We achieve between 3-6° lower water temperatures, depending on waste heat and fan speed.
The end-customer variants, i mean 120/140mm radiator sizes, will come later.
This must be awesome.