Undervolting a CPU limited by power or thermal limit will increase the frequency the CPU runs at. It is good for overclockers ONLY. It does not decrease the strain and it decreases voltage safety margin for stability.

azraelActually, both Intel and motherboard manufacturers are at fault here, in my opinion

Yes, but then don't bill us 500-1000$ for a product that doesn't deliver what it actually advertises, it is against the consumer law. Yet they segregate, make multiple rubbish products, limit us and basically blackmail us into spending more if we would like more logic(less pain in the arse) pcie or power header, IO layout. Release like ~3 boards and concentrate on delivering quality... but naah... last years economy class was all about flooding the market and we took the bait.

I don't blame Intel nor AMD, GPUs are totally fine consuming more, so it can work for a consumer device with no issues if you design it properly. It's all about quality control, proper testing and cheaping out.

Vayra86its either stable or its not.

Actually no, it can be stable & unstable at the same time ~ or so says something something quantum o_O

Also technically you can't test the number of possible combinations of software &/or hardware on any system to test all plausible causes of instability ~ the possibilities are literally endless. Most "stable" PC's are functionally/practically stable though not theoretically.

I'll bet underclocking is not even needed.
Limiting the CPU to intel defaults of 253w and maybe even setting iccmax to 307 amps (also default) would likely solve the issues.

Motherboards defaulting to such insane power settings these days is totally insane to me.

ToothlessPoor coding being dumped on players.

Welcome to PC gaming! It's why it's the mater race.

Reports are it's actually only individual CPUs having a problem, and a replacement CPU solves it. Which suggests that any tweaking of BIOS settings is really just hiding the problem.

Hi,
Pushing these chips so they can get back the gaming crown from x3d f-stability hehe :pimp:

ThrashZoneHi,
Pushing these chips so they can get back the gaming crown from x3d f-stability hehe :pimp:

-So long as it passes most reviewer's 30s testing run...

BoggledBeagleUndervolting a CPU limited by power or thermal limit will increase the frequency the CPU runs at. It is good for overclockers ONLY. It does not decrease the strain and it decreases voltage safety margin for stability.

You limit the power draw, that's how it's done.

user556Reports are it's actually only individual CPUs having a problem, and a replacement CPU solves it. Which suggests that any tweaking of BIOS settings is really just hiding the problem.

If the issue is motherboards running CPUs at settings above stock, then it's normal that some would work better than others.

Psinet7800X3D and 7900 XTX = no such problems, ever.

NFI why anyone would want to go with Intel or Nvidia with their massive power draw and associated heat.

Haven't tried helldivers 2 yet?

KaitouXIf the issue is motherboards running CPUs at settings above stock, then it's normal that some would work better than others.

Default settings are always conservative as per Intel's detailed settings. If Intel misjudged how sensitive some CPUs are then it's on them to resolve and pass on to the board partners. Or provide replacement CPUs free of charge.

user556Default settings are always conservative as per Intel's detailed settings. If Intel misjudged how sensitive some CPUs are then it's on them to resolve and pass on to the board partners. Or provide replacement CPUs free of charge.

Hi,
RMA already does that if used although shipping to Intel costs the buyer.

Issue is later batch chips usually from Taiwan sp65+- are always worse than early release chips usually from China sp90+-
So all these poor performing chips you may get a worse batch hehe

That pairing of hardware is asking for problem. You're pairing two pieces of hardware that are both known to be hot and power hungry teetering on the edge of instability. Mix in poor quality and/or underfed PSU or anemic MB and you've got a power keg situation. Plus you've got MB makers doing really idiotic things with stock bios settings.

JohHIt uses Unreal Engine 5 and the developers of Unreal Engine 5 themselves (the RAD/Epic Games Tools) noted problems with recent Intel CPUs:
www.radgametools.com/oodleintel.htm

Blaming it on the devs is funny. Intel responded and advised Intel owners to avoid the problem by changing some BIOS settings.

Translation, its a UE5 problem and the game devs are parroting what the engine devs said.

In a more serious mode one could argue when you have a power rail type issue, whether its bad VRM, and PSU or whatever, then underclocking a CPU (or GPU) can fix issues, but is this what is really about and if it is, its a bit misrepresentative as its presented as a problem that would be generic or a flaw with the platform rather than a workaround for specific hardware combinations.

chrcolukTranslation, its a UE5 problem and the game devs are parroting what the engine devs said.

In a more serious mode one could argue when you have a power rail type issue, whether its bad VRM, and PSU or whatever, then underclocking a CPU (or GPU) can fix issues, but is this what is really about and if it is, its a bit misrepresentative as its presented as a problem that would be generic or a flaw with the platform rather than a workaround for specific hardware combinations.

You're free to think that but why would Intel's CPU begin returning different results at different clock rates?
And why would Intel respond with settings to change to avoid the problem and also replace CPUs if you show them this issue?
Is it just because RAD Game Tools has such an impeccable reputation going back 30 years as a middle-ware vendor that Intel is playing nice?

Really makes one think.

azraelActually, both Intel and motherboard manufacturers are at fault here, in my opinion. Intel for making it possible to remove the power limits completely (yet warning against it), and motherboard manufacturers for disregarding that warning. Have to make your product look as good as possible ...even if only for a brief time before it's failing. Then the blame game begins and the customer ends between a rock and a very hard place. Just my two cents.

True, ASRock for my board have a bios for download available listed as a stable build, I install it and it defaults to 20C higher than the specified safety temperature on the CPU (120C tjmax, should be 100C).
On another board if I enable XMP, it significantly over volts the IMC.

We know the ASUS debacle of blowing up AMD 7000 series chips. Then changing their web site to make it look as if the problem was never there, removing liability etc.

Making MCE a standard default bios mode.

For sure is arguments to lock down the bios, as motherboards manufacturers are failing to show restraint, they all want that extra few % on motherboard reviews.

It wouldnt surprise me if my 120C tjmax bios is an ex review bios, where they forgot to flip the default back for public consumption. (reviewer shows in video, look I am using auto for tjmax).

I think a solution I would like to see is, where Intel/AMD have to approve each bios before release, the Board vendors have a bad boy points system, different mistakes give different points, if they get X amount of points within a period of time, they go through a ban of being allowed any K or X features in their bios at all, full lockdown, to comply and not be labelled as a bad boy, all non spec features "have" to be off by default.

The industry is in a bit of a mess.

JohHYou're free to think that but why would Intel's CPU begin returning different results at different clock rates?
And why would Intel respond with settings to change to avoid the problem and also replace CPUs if you show them this issue?
Is it just because RAD Game Tools has such an impeccable reputation going back 30 years as a middle-ware vendor that Intel is playing nice?

Really makes one think.

What are these settings Intel advised to change? I didnt comment on them as they wasnt disclosed. I assumed in my head though Intel are likely telling people to configure spec power limit's.

user556Default settings are always conservative as per Intel's detailed settings. If Intel misjudged how sensitive some CPUs are then it's on them to resolve and pass on to the board partners. Or provide replacement CPUs free of charge.

Intel has been pushing things to the brink for many generations ever since Ryzen became really competitive, anything goes to get that performance crown in reviews. It's how things like the 14900KS came to be.

chrcolukFor sure is arguments to lock down the bios, as motherboards manufacturers are failing to show restraint, they all want that extra few % on motherboard reviews.

Competition is great and all but I'd love to see a "founders edition" reference motherboard design. They surely exist in a lab and probably have much better and saner layouts than what AIBs are doing now. But at least making a template bios with mandatory settings - both in terms of default values and configuration visibility - would be great, having to look for a specific board version from a specific vendor to get a specific feature available in the bios (i.e. default gpu boot, pcie power modes, exotic bifurcation options for external adaptors, etc.) is complete bullshit

Dr_b_don't AMD GPUs this generation use more power than equivalent nvidia 4000 GPUs?

Those GPUs do use a bit more power, but they don't crash the game because of this. GPUs are not an issue here. Overpowered, unlocked i9 CPUs are, regardless which GPU is used.

wNotyarD"We're sorry, but your PC is too fast to run this game."

"We are sorry, but your PC has a motherboard tuned towards bigger-number-better and pushing unlocked CPU into instability territorry"

ToothlessPoor coding being dumped on players.

And poor batch of CPUs running unstable in overprovisioned motherboard.

No option for controller support is my biggest gripe.

chrcolukTranslation, its a UE5 problem and the game devs are parroting what the engine devs said.

Doubtful, as vast majority of CPUs simply work with game, including i9. They clearly say it's a small number of i9, so it could be a batch or specific motherboards that overprovision those CPUs.

Only because those are Intel's conservative settings.

This is just a case of rumor and FUD being blown out of proportion. I suspect developers are either trying to defend their game's quality or outsource a problem they have into something else.

Any Raptor Lake system that is crashing at stock is due to user error, such as unlocking the power without suitable cooling or an insufficient power supply. A lot of the time, people just enable XMP too, which is not a wise thing to do, unless you have a kit with a very conservative XMP profile, especially if you're running in a closed case with low fan speeds aka hotbox. I have never experienced any instability in any game or software with my i9-13900KS.

azraelActually, both Intel and motherboard manufacturers are at fault here, in my opinion. Intel for making it possible to remove the power limits completely (yet warning against it), and motherboard manufacturers for disregarding that warning. Have to make your product look as good as possible ...even if only for a brief time before it's failing. Then the blame game begins and the customer ends between a rock and a very hard place. Just my two cents.

I mean this is an enthusiast product. Removing the power limit is an awesome ability to have. But it's unwise to do so on a conventional machine. With 360-420 mm AIO's or large tower heatsinks such as the NH-D15, you won't want to run a Raptor chip above 300 W.

Tek-CheckAnd poor batch of CPUs running unstable in overprovisioned motherboard.

Not really, no. Three models causing issue is not a "poor batch." It's simply game devs being lazy.

Dr. DroThis is just a case of rumor and FUD being blown out of proportion. I suspect developers are either trying to defend their game's quality or outsource a problem they have into something else.

Any Raptor Lake system that is crashing at stock is due to user error, such as unlocking the power without suitable cooling or an insufficient power supply. A lot of the time, people just enable XMP too, which is not a wise thing to do, unless you have a kit with a very conservative XMP profile, especially if you're running in a closed case with low fan speeds aka hotbox. I have never experienced any instability in any game or software with my i9-13900KS.



I mean this is an enthusiast product. Removing the power limit is an awesome ability to have. But it's unwise to do so on a conventional machine. With 360-420 mm AIO's or large tower heatsinks such as the NH-D15, you won't want to run a Raptor chip above 300 W.

Your claim is that no CPU could be bad or leaking voltage. There is also the fact that some board vendors like to turn the voltage up regardless of the processor.