• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

a6-6400k, driver issue?

Joined
Oct 7, 2006
Messages
1,338 (0.20/day)
Processor e8200 3.93mhz@1.264v
Motherboard P5E3 Pro
Cooling Scythe Infinity
Memory 4gb of G.Skill Ripjaw 6-7-7-18@1404 and 1.62v
Video Card(s) HIS 5770 v2 940/1275mhz stock volts
Storage 1TB Hitachi
Display(s) Acer 22" Widescreen LCD
Case Blue Cooler Master Centurion
Audio Device(s) Onboard audio :(, and Klipsch 5.1 Pro Media's
Power Supply 650 Watt BFG
Software Vista 64 Ultimate
I bought an a6 black edition, and Asrock fm2a55m-vg3+ motherboard for a new build. It is using Vista 64 (because I have a copy).

After installing Catalyst the g-card shows installed. If I go to display settings it shows a cat. control center link in the settings. If I go to CCC it does not show gcard options. If I try to run Windows Index Rating it rates the graphics at 1. I tried running Futuremark Vantage, and it says the hardware is not directx 10 compliant.

I tried cleaning the driver off, but when the system reboots I only get a black screen. I tried my 5770hd card, but it only gets a black screen or a BSOD hardware error screen. I booted on the apu, with the 5770 installed, and it did show gcard options in CCC. I tried a removal of the driver again with the 5770 and I only get the black screen. The only recovery after the black screens are a system restore.

I contacted Asrock and they claim the processor is compatible with the board.

Has anybody seen issues like this before? Any recommendations?
 
Joined
Apr 19, 2012
Messages
12,062 (2.63/day)
Location
Gypsyland, UK
System Name HP Omen 17
Processor i7 7700HQ
Memory 16GB 2400Mhz DDR4
Video Card(s) GTX 1060
Storage Samsung SM961 256GB + HGST 1TB
Display(s) 1080p IPS G-SYNC 75Hz
Audio Device(s) Bang & Olufsen
Power Supply 230W
Mouse Roccat Kone XTD+
Software Win 10 Pro
I could be wrong, but I believe I've run into problems like this before. Turned out I was downloading half of the drivers required. I think there is an additional driver you need to have installed for the APU work as intended. Mind you, this was for a mobile APU.
 
Joined
Oct 7, 2006
Messages
1,338 (0.20/day)
Processor e8200 3.93mhz@1.264v
Motherboard P5E3 Pro
Cooling Scythe Infinity
Memory 4gb of G.Skill Ripjaw 6-7-7-18@1404 and 1.62v
Video Card(s) HIS 5770 v2 940/1275mhz stock volts
Storage 1TB Hitachi
Display(s) Acer 22" Widescreen LCD
Case Blue Cooler Master Centurion
Audio Device(s) Onboard audio :(, and Klipsch 5.1 Pro Media's
Power Supply 650 Watt BFG
Software Vista 64 Ultimate
I would love to know what the other driver was.
 
Joined
Apr 19, 2012
Messages
12,062 (2.63/day)
Location
Gypsyland, UK
System Name HP Omen 17
Processor i7 7700HQ
Memory 16GB 2400Mhz DDR4
Video Card(s) GTX 1060
Storage Samsung SM961 256GB + HGST 1TB
Display(s) 1080p IPS G-SYNC 75Hz
Audio Device(s) Bang & Olufsen
Power Supply 230W
Mouse Roccat Kone XTD+
Software Win 10 Pro
I'm assuming you're using the CCC 13.2 from the general APU download page?

It may be worth downloading the Win 7 drivers with 14.4 as a test.

Please try updating the BIOS on your MoBo, and then reset the CMOS on the mobo. (remove MoBo battery, and reinstall)
 
Joined
Oct 7, 2006
Messages
1,338 (0.20/day)
Processor e8200 3.93mhz@1.264v
Motherboard P5E3 Pro
Cooling Scythe Infinity
Memory 4gb of G.Skill Ripjaw 6-7-7-18@1404 and 1.62v
Video Card(s) HIS 5770 v2 940/1275mhz stock volts
Storage 1TB Hitachi
Display(s) Acer 22" Widescreen LCD
Case Blue Cooler Master Centurion
Audio Device(s) Onboard audio :(, and Klipsch 5.1 Pro Media's
Power Supply 650 Watt BFG
Software Vista 64 Ultimate
That did not help. It is the same issue, but thanks for the recommendation
 
Joined
Apr 19, 2012
Messages
12,062 (2.63/day)
Location
Gypsyland, UK
System Name HP Omen 17
Processor i7 7700HQ
Memory 16GB 2400Mhz DDR4
Video Card(s) GTX 1060
Storage Samsung SM961 256GB + HGST 1TB
Display(s) 1080p IPS G-SYNC 75Hz
Audio Device(s) Bang & Olufsen
Power Supply 230W
Mouse Roccat Kone XTD+
Software Win 10 Pro
Are you downloading APU CCC drivers or Radeon CCC drivers?
 
Joined
Oct 7, 2006
Messages
1,338 (0.20/day)
Processor e8200 3.93mhz@1.264v
Motherboard P5E3 Pro
Cooling Scythe Infinity
Memory 4gb of G.Skill Ripjaw 6-7-7-18@1404 and 1.62v
Video Card(s) HIS 5770 v2 940/1275mhz stock volts
Storage 1TB Hitachi
Display(s) Acer 22" Widescreen LCD
Case Blue Cooler Master Centurion
Audio Device(s) Onboard audio :(, and Klipsch 5.1 Pro Media's
Power Supply 650 Watt BFG
Software Vista 64 Ultimate
I downloaded the recommended driver. I just downloaded the gcard 14.4 driver and was able to get the 5770 working. That is a step in the correct direction, maybe I will get the APU working later, if not, I do at least have an old gcard I can give them.
 
Joined
Oct 7, 2006
Messages
1,338 (0.20/day)
Processor e8200 3.93mhz@1.264v
Motherboard P5E3 Pro
Cooling Scythe Infinity
Memory 4gb of G.Skill Ripjaw 6-7-7-18@1404 and 1.62v
Video Card(s) HIS 5770 v2 940/1275mhz stock volts
Storage 1TB Hitachi
Display(s) Acer 22" Widescreen LCD
Case Blue Cooler Master Centurion
Audio Device(s) Onboard audio :(, and Klipsch 5.1 Pro Media's
Power Supply 650 Watt BFG
Software Vista 64 Ultimate
My only thought at this time is that Asrock is wrong and some incompatibility exists. I installed an old 3870 I have. It works. I uninstalled all of the CCC, and reinstalled. Now the apu only shows as standard vga.
 
Top