Can I flash RX 5700 XT 50TH version to RX 5700 XT?

[lazye]

Whatever the reason, is there a way to troubleshoot it without neglecting everything? Rx 5700XT 50. I want to transfer vbios to RX 5700XT. I have an igpu so I can turn around in a bad lighting situation.





Because; It's faster than the 5700XT, but I can't get the same clock speeds even if I manually set it to 188W. There is more internally to extend the 1980 Mhz clock and since I don't want that I was wondering if there was a way to do the trick.



5700XT: 180W Base Clock: 1605 MHz Game Clock: 1755 MHz Boost Clock: 1905 MHz

5700XT 50th Anniversary: 188W Base Clock: 1680 MHz Game Clock: 1830 MHz Boost Clock: 1980 MHz


Even if I put the card at 188W, I cannot reach these speeds.

Powercolor RX 5700 XT 8GB BIOS

Powercolor RX 5700 XT VBIOS

8 GB GDDR6, 1400 MHz GPU, 1750 MHz Memory

www.techpowerup.com

AMD RX 5700 XT 8GB BIOS

AMD RX 5700 XT VBIOS

8 GB GDDR6, 1400 MHz GPU, 1750 MHz Memory

www.techpowerup.com

PowerColor Liquid Devil RX 5700 XT OC

PowerColor Liquid Devil RX 5700 XT OC Specs

AMD Navi 10, 2070 MHz, 2560 Cores, 160 TMUs, 64 ROPs, 8192 MB GDDR6, 1750 MHz, 256 bit

www.techpowerup.com

Help is appreciated. So is there a way to show my 5700 XT card as an RX 5700 XTX in Windows?


I tried all versions but I keep getting ssid and p/n errors. (Atıflash 2.93, 3.04, 5.67...)


XFX's own biography;

XFX RX 5700 XT VBIOS

8 GB GDDR6, 1400 MHz GPU, 1750 MHz Memory

www.techpowerup.com

 

[Space Lynx]

its not worth the risk. just do a mild oc on your current card and be content

 

[lazye]

I aim to achieve maximum performance with as low power consumption as possible on my card, so I do not want to go to high power consumption.

Because I need to go above 200W to reach these values.

Is there any way to deceive?

 

[Marcus L]

I aim to achieve maximum performance with as low power consumption as possible on my card, so I do not want to go to high power consumption.

Because I need to go above 200W to reach these values.

Is there any way to deceive?

The card can easily handle 200w so you really think there is a difference with an extra 15w of power draw?

 

[lazye]

It gets too hot and power consumption increases too much. I want this. My goal is just to trick the system by using the 5700XT 50th and thus increase the potential of the card.

 

[GerKNG]

undervolt/overclock your GPU.
the bios has nothing to do with the capabilities of the chip.

 

[lazye]

Just as the RX 5700 can make the RX5700XT, I think the RX 5700XT can also be the RX 5700 XTX.

 

[Marcus L]

Just as the RX 5700 can make the RX5700XT, I think the RX 5700XT can also be the RX 5700 XTX.

There is no xtx

 

[lazye]

Then can you talk about the difference between the RX 5700XT 50th and the normal RX 5700XTs?

 

[VuurVOS]

I tried all versions but I keep getting ssid and p/n errors. (Atıflash 2.93, 3.04, 5.67...)

AMDVBFlash 2.93 should be able to crossflash.
Which parameters did you use with 2.93? Can you make a screenshot?

Edit: What is the part number of your card?

 

[lazye]

It immediately gives this error, so the flash process cannot be performed.


RX-57XT83LD8

XFX RX 5700XT Trible Disspantion

XFX RX 5700 XT VBIOS

8 GB GDDR6, 1400 MHz GPU, 1750 MHz Memory

www.techpowerup.com

 

[GerKNG]

they called the chip Navi 10 XTX instead of Navi 10 XT
it's the exact same die with the exact same amount of CU, TMU, ROP and Cache. Just with a 75MHz core clock offset.
there is nothing to flash. if you want to have your card exactly like this one go into the OC Section of the Radeon Software and increase the core clock by 75MHz if you have a reference Card.
any partner model from the nitro +, red devil or strix is already faster out of the box.

 

[VuurVOS]

View attachment 340589

It immediately gives this error, so the flash process cannot be performed.


RX-57XT83LD8

XFX RX 5700XT Trible Disspantion

XFX RX 5700 XT VBIOS

8 GB GDDR6, 1400 MHz GPU, 1750 MHz Memory

www.techpowerup.com

Techpowerup doesn't provide the plus version.

Please download version 2.93 from techpowerup. See instructions below:

Get amdvbflash 2.93

https://www.techpowerup.com/download/ati-atiflash/

Then look for Version 4.68, underneath 4.68 you will see a link to show older version, click that and you should see version 2.93

Then unzip the files to a usb stick since Windows doesn't always like to have files in C:\*\. On an usb you likely wont get that error message.

 

[lazye]

I am already aware of this, I don't think you fully understand what I mean, I can manually set the frequency at 2100 Mhz. That's not the point. Giving 2100 Mhz frequency at 180W will not be of any use. The card is heating up. The frequency will be reduced. Even if I increase the power of the card, it is impossible to reach the boost clock speed this time, even in the default setting. I already know that I can increase it by hand.

@VuurVOS It gives the same error.

 

[Colddecked]

Dude if your card can't take the values manually, what makes you think that putting a bios that will run at speeds your card can't handle will make it work? It'll make it unstable.

 

[redeye]

I am already aware of this, I don't think you fully understand what I mean, I can manually set the frequency at 2100 Mhz. That's not the point. Giving 2100 Mhz frequency at 180W will not be of any use. The card is heating up. The frequency will be reduced. Even if I increase the power of the card, it is impossible to reach the boost clock speed this time, even in the default setting. I already know that I can increase it by hand.

IMO, it is not going to make a difference. admit defeat, and have fun playing games.
check the wiki https://en.wikipedia.org/wiki/Radeon_RX_5000_series
75Mhz uplift, 10 watt more power.

undervolt it, and increase power level… and decrease the max clock frequency. test to see if it increases benchmark scores.
your 5700 “is what it is”, what you want is a quiet card right?, then bespoke/custom watercooling is the way to go. most likely not worth it in a preformance cost ratio…

otherwise, get good airflow in your case, and watercool (AIO) your cpu, so you remove the heat outside of the case…

i think your SOL, so just deal with it. GPU’s are loud underload air cooled. my 7900xtx air cooled was almost “jet engine” loud, at max. bespoke Water cooling the card, reduced the temps 20c, but now i still have to watch the fan noise (phantek T30’s for the silence) BUT, what is silence?. no trace of noise when i turn the computer on, or can i can ignore the fan noise?, or fan noise that is background noise?
38c at 465Watts, (about 10-11c above 21.4c) it is quieter than city noise, but i still notice it. (the reviews state “28db’s for fan rpms i am running, i can still hear it…)

 

[lazye]

Okay, lastly, I want to ask something. While the normal Rx 5700XT idle power consumption is around 8-9W, this value is around 12-13W for the XFX RX 5700XT. What could be the reason for this situation when all voltages are the same and the fan does not even work at idle?

XFX:

MSI Gamıng X:

Note: If I turn off smart access memory, the change is at most 1W. It's not about her.