ENERMAX is introducing a new tower CPU cooler family in the form of the ETS-F40 series, which promises heat dissipation of up to 200 W TDP. The coolers feature a compact design, with a single fin stack protruding directly from the baseplate and 4x 6 mm heatpipe array. The ETS-F40 series will be available in part numbers ETS-F40-FS (Essential version, with non-RGB fan); ETS-F40-BK (same as Essential, but with a solid black finish); ETS-F40-BK-ARGB (solid black finish with an ARGB fan); and ETS-F40-W-ARGB (solid white finish with an ARGB fan). Both the ARGB versions also sport RGB lighting in the top plate. The cooler further supports installation of a second fan.

The supplied fans are 140 mm in nature, PWM-controlled affairs which can spin as low as 300 RPM (up to 1200 RPM), if noise is your utmost concern but still want a (somewhat) active cooling solution. Cooler dimensions stand at 140 x 65 x 156 mm (w/ fan) for the essential version, while the added top plate in the others will increase height to 158 mm. The ETS-F40 Essential will be available from this month of October, while the other versions with the ARGB fan will enter the channels in December. The ETS-F40 Essential is currently available in an european etailer for ~€31, which could point to a $29 pricing for the base offering.

Enermax today rolled out the MarbleBron line of mid-range PSUs. Available in 550 W, 650 W, and 750 W models, these PSUs offer partial modular cabling with 80 Plus Bronze efficiency. Under the hood, these units offer DC-to-DC switching, APFC, and protection against over/under-voltage, overload, overheat, and short-circuit. A single +12 V rail design is employed on all three models, with a 45 A main rail on the 550 W model, a 54 A rail on the 650 W model, and a 62 A rail on the 750 W model.

Another key feature with the MarbleBron is the use of a 120 mm high static-pressure fan with "Smart Air Control," with the PSU's noise output rated at 14 dBA with the load under 40%. The 550 W and 650 W models offer just one 4+4 pin EPS connector, while the 750 W model offers two. The 650 W and 750 W models offer four 6+2 pin PCIe power connectors, while the 550 W offers two. The company didn't reveal warranty or pricing information.

Enermax has announced a new entry-level PSU lineup, which they have somewhat clumsily named CYBERBRON (it's not Cybertron nor Cyberborn, but Cyberbron). These are pretty standard affairs, featuring a non-modular cable design (though the cables are flattened for easier routing), 80 plus Bronze certification, and Japanese electrolytic capacitors. A single+rail +12 V design lies under the hood as well, as does a 120 mm fan.

Operating protections are pretty standard as well: OVP (Over Voltage Protection), UVP (Under Voltage Protection), OPP (Over Power Protection), SCP (Short Circuit Protection) and OTP (Over Temperature Protection). Dimensions stand at 150 (W) x 86 (H) x 140 (D) mm. The 700 W version delivers 54 A on the +12 V rail, 17 A under +5V, and 19 A under +3.3 V. Connectors stand at 1x ATX 24, 2x EPS 8, 4x PCIe 6+2, 8x SATA, 4x Molex and 1x Floppy. Pricing starts at around 56,99€, 66,99€ and 76,99€,

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, launches an addressable RGB computer case featuring modern front panel design, in which the dynamic lighting effects of the pre-installed addressable RGB intake fans will reflect from the gaps between the marble-styled front panel and deliver a stylish look. The MarbleShell series is designed with a tempered glass side panel and a multi-functional tunnel at the bottom which ensures a neat and tidy appearance inside the case. The series includes mini-tower and mid-tower versions; each version also has black and white colors available.

MarbleShell series offers 2 ways of addressable RGB lighting control, one is connecting with addressable RGB-enabled motherboards which users can control the lighting effects by the motherboards' software, the other is to select the pre-set 13 lighting effects by the top I/O port. This series further provides an integrated hub to keep 6 addressable RGB devices' lighting in sync.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces the new addressable RGB ATX computer case, LIBLLUSION LL30 is available in Europe. LIBLLUSION LL30 comes with one SquA RGB fan at the rear; the built-in integrated hub can support up to 6 addressable RGB devices lighting in sync with an ARGB-ready motherboard software or the lighting control through this computer case.

Utilizing the line element, the front panel of LIBLLUSION LL30 is embellished by the multiple lighting strips which part of them is the reflection of the light from the interior system through the vents on the top and bottom of the front panel. The clever vent design on the front panel combines the in-take airflow efficiency and the beauty of light.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, launches a new All-In-One CPU liquid cooler, LIQMAX III ARGB, designed to display fascinating addressable RGB lighting effects by synchronizing with ASUS Aura Sync, ASRock Polychrome, GIGABYTE RGB Fusion and MSI Mystic Light Sync. Available in 120 mm, 240 mm and 360 mm, LIQMAX III ARGB series is compatible with both Intel and AMD CPU sockets (except socket TR4/SP3).

The premium Aurabelt water block and hub-lighting RGB fan can present 16.8 million RGB lighting illumination by synchronizing with motherboards that have 5 V addressable RGB header. Users can select the preferred lighting styles via the Addressable RGB motherboard software. In addition, the 360 mm radiator version comes along with a control box which allows users to adjust the preferred lighting effects (10 pre-set effects), colors, brightness and speed without software needed.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces a white-colored version of SquA RGB fan series at Computex 2019. Its eye-catching lighting effects and superior cooling performance have got many media attention. SquA RGB white version is characterized by an exquisite white square-shaped lighting frame, addressable RGB synchronization, optimized low 300RPM starting speed, and superior cooling performance. SquA RGB white version will have Single Pack and 3-Fan Pack for retail market as well.

Combined with arc and straight lines, SquA RGB white version provides user two types of lighting patterns to match the system theme perfectly. Thanks to ENERMAX LED LIGHTING Technology, SquA RGB white version is able to offer incredibly bright and even lighting; the light further can be penetrated the holes around the back of the frame to create a visual feast as diamonds shining in the dark. With the pure white frame matched, SquA RGB white version will be a dream model for users to embellish their style rigs.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, is expanding the widely-acclaimed ARGB liquid cooler series, AQUAFUSION, with the addition of white 120 and 240 mm AIO coolers. Inherited from AQUAFUSION lineup, the white version is characterized by a white water block with splendid step shaped lighting effects, ENERMAX SquA RGB white fan and radiator to accent your rig's style.

Thanks to the precisely engineering technology, the patented Dual-Chamber water block design is able to isolate the pump from CPU heat in order to prolong its lifetime usage. In addition, combined with the Shunt-Channel Technology (SCT) on the cold plate and the Central Coolant Inlet (CCI) structure inside water block, it can inject the incoming coolant at the hottest spot to prevent heat surges and shorten the coolant flow path, resulting in faster heat transfer and better cooling performance of up to 300 W and 360 W TDP for 120 mm and 240 mm radiator respectively.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, adds an addressable RGB version into ETS-T50 AXE lineup. The extended product series is called ETS-T50 AXE ARGB, which can support the cooling performance of 230 W+ TDP and is designed to display fascinating addressable RGB lighting effects by synchronizing with ASUS Aura, ASRock Polychrome, GIGABYTE RGB Fusion and MSI Mystic Light Sync.

The exclusive plug & play function further enables ETS-T50 AXE ARGB to display luminous rainbow RGB lighting effect by simply connecting the PWM power cable. Available in black and white colors, ETS-T50 AXE ARGB is compatible with both Intel and AMD CPU sockets (except socket TR4/SP3).

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, introduces LIQMAX III RGB, which is an extended product from LIQMAX III series. LIQMAX III RGB features a luminous RGB fan and Aurabelt water block designed to support synchronizable RGB lighting with RGB motherboards from ASRock, ASUS, Gigabyte, and MSI. Compatible with both Intel and AMD CPU sockets (except socket TR4/SP3), LIQMAX III RGB would be your top choice to experience the harmonious RGB lighting effects.

The premium Aurabelt water block and hub-lighting RGB fan provide vivid RGB illumination and are able to support RGB lighting synchronization with motherboards that come with 4 pin RGB header(s) (12V/G/R/B). Users can select the preferred lighting styles via the RGB motherboard software.

In part 2 of our 3-part series on Enermax at Computex 2019, we go hands-on with three of the company's new additions to its vast lineup of enthusiast PSUs. The lineup begins with an addition to the company's high-Wattage MaxRevo series, with a new 1800W model. This PSU requires 230VAC for its advertised Wattage, and can still put out 1600W with 115VAC. With 230VAC, the unit is capable of putting out 1900W of peak output, although 1800W is guaranteed (continuous output).

At both AC input types, the PSU's efficiency is rated 80 Plus Gold. Such high power is packed into a body that's just 18 cm (7 inches) in length. Its 135 mm double ball-bearing fan is capable of spinning at speeds of up to 3,100 RPM. This fan typically runs at 20-40% of its speed, but at the push of a button near the AC receptacle, can be forced to run at max speed. The MaxRevo 1800W comes with plenty of straws out of its fully-modular cabling plane, with at least two 4+4 pin EPS and ten 6+2 pin PCIe.

Enermax launched over a dozen new product lines and dozens more individual SKUs this Computex. This article part of a 3-part series that covers their exhaustive booth, beginning with fans, and CPU coolers. At the heart of the company's cooling portfolio this year is the new SquaRGB, a new line of case/radiator fans introduced this February, characterized with an RGB LED diffuser design that supposedly looks like a square with two curved sides. With sizes ranging from 120 mm to 140 mm and 200 mm, Enermax used these fans in nearly all their new products, including standalone fan sets, CPU coolers (both air and liquid types), and pre-installed in their new cases. The bore of the fan-frame is still circular, and the irregular shape surrounding the bore funnels air into the impeller.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, introduces T.B.RGB AD., the advanced version of T.B.RGB fan series. Since the launch in December 2017, the T.B. RGB fans have got much recognition and admiration for its unique illumination and silent cooling performance among the RGB enthusiasts. In addition to the incredible lighting effects and quiet operation, this new advanced version supports addressable RGB (aka ARGB) lighting sync with motherboards from major brands, including ASUS, ASRock, Gigabyte, and MSI. T.B.RGB AD. fan will be available in 3-Fan Pack only.

With the unique halo arc-shaped frame structure of the predecessor, T.B.RGB AD. creates the gorgeous 4-ring ARGB lighting effects to glitter the system. Featuring patented ENERMAX LED LIGHTING technology, the ENERMAX's ARGB fan provides consistent and uniform luminance. Moreover, the brilliant ARGB fan supports lighting synchronization with motherboards that have 4-pin addressable RGB header (The header pin assignment is +5V/D/-/G).

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, introduces LIQMAX III, the new generation of LIQMAX, one of the proclaimed AIO CPU cooler series from ENERMAX. Like the award-winning predecessors featuring superior cooling performance as well as rock-solid quality, LIQMAX III is built with a luminous Aurabelt water-block supporting synchronizabale RGB lighting with RGB motherboards from ASRock, ASUS, Gigabyte, and MSI. LIQMAX III is undoubtedly an excellent choice for mainstream water-cooled RGB gaming rigs.

The premium Aurabelt water-block provides luminous RGB lighting; besides, the exquisite water block is able to support RGB lighting synchronization with motherboards that come with 4pin RGB header(s) (12V/G/R/B). Users can select the preferred lighting styles via the RGB motherboard software.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, launches a new addressable RGB gaming chassis, StarryFort SF30. Featuring full ATX support, panoramic tempered glass side and front panel, a vivid LED strip on the side, and 4 x pre-installed SquA RGB fans, StarryFort SF30 presents a stunning gaming fortress that is ready to light up your masterpieces.

StarryFort SF30 comes with 4x pre-installed SquA RGB fans which feature unique square-shaped LED frame to create incredible lighting effects. This mid-tower gaming chassis supports addressable RGB lighting synchronization with motherboards featuring RGB header (4-pin assignment: +5V/D/-/G); you can program preferred lighting effects via the motherboard software. Moreover, for those who do not use the RGB-sync motherboards, the built-in integrated hub allows you to control the lighting synchronization of 6x addressable RGB devices through the lighting control button on the I/O panel. Characterized by dual tempered glass panels, StarryFort SF30 offers you a clear view of both your system components and vivid RGB illumination.

Enermax introduces CoreIcer CI30, an addressable RGB gaming chassis with full ATX support, dual tempered glass panels, and 4x pre-installed vivid RGB fans. This mid-tower gaming case is for mainstream gamers to build their RGB gaming systems.

CoreIcer CI30 has 4x pre-installed RGB fans characterized by stunning RGB lighting from the central of the fans. The gaming fortress supports addressable RGB lighting synchronization with motherboards featuring RGB header (4-pin assignment: +5V/D/-/G); you can program preferred lighting effects via the motherboard software. Moreover, for those who do not use the RGB-sync motherboards, the built-in integrated hub allows you to control the lighting synchronization of 6x addressable RGB devices through the lighting control button on the I/O panel. With panoramic tempered glass front and side panel, CoreIcer CI30 provides a clear view of both your precious gear and vivid RGB lighting presentation.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces the launch of AQUAFUSION, a new closed-loop liquid cooler series. The new addressable RGB CPU cooler lineup is characterized by a unique Aurabelt water-block and ENERMAX SquA RGB fans for brilliant LED lighting effects. Besides the stunning lighting, AQUAFUSION features ENERMAX's patented cooling technology, Shunt-Channel-Technology (SCT) cold-plate design; the SCT can prevent the formation of the boundary layer and enhance the liquid flow inside the cold-plate, which helps reduce the formation of hot spots. Moreover, the SquA RGB fans can not only support addressable RGB lighting sync, but also generate centered and stronger air pressure with the vortex frame. AQUAFUSION is ready to amaze customers with its glamour and cooling capability.

The Aurabelt water-block designed with the exceptional step-shaped styling can deliver a beautiful multi-layer lighting effect. Furthermore, AQUAFUSION offers 2 ways to manage the RGB lighting. Users can program their preferred effects through RGB motherboard software or app to match the color theme with other RGB gear. Or, users can utilize the AQUAFUSION's control box to select preferred lighting effects (10 pre-set effects), colors, brightness and speed.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, introduces a new full modular power supply series, REVOLUTION D.F. With 80PLUS Gold certification, REVOLUTION D.F. provides stable and high efficiency performance during operation. The exclusive D.F. switch, which applies the patented Dust Free Rotation technology, allows users to activate the self-cleaning function anytime they desire. Furthermore, the unique Smart Airflow Control design with patented Twister Bearing fan delivers an almost inaudible operation within 70% system load. REVOLUTION D.F. series is surely a perfect match for the mainstream gaming rigs and multimedia workstations.

REVOLUTION D.F. series is engineered with several modern features, including the exclusive D.F. switch, DC to DC converter circuit, and 100% 105°C Japanese electrolytic capacitors, to make the 80 PLUS Gold Certified PSU more stable and durable than its peers. Adopting the patented Dust Free Rotation tech, the D.F. switch enables users to activate the self-cleaning function to blow away the accumulated dust by simply pushing the button anytime during operation.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces the launch of MAKASHI MK50, a premium addressable RGB-ready E-ATX chassis. Featuring a subtle yet appealing RGB lighting strip on the front panel, MAKASHI MK50's exterior is minimalist but elegant. The roomy E-ATX chassis supplies 3 designated mounting locations for liquid cooler installation and is capable to accommodate up to 8 fans, which provides gamers and modding enthusiasts with greater flexibility in cooling configuration. With several modern features, MKAKASHI MK50 is a great choice for users to customize their rigs.

Decent asymmetrical front panel with unique lightning-shaped RGB LED strip creates a visually appealing look. MAKASHI MK50 supports addressable RGB lighting sync with motherboards featuring RGB header (4-pin assignment: +5V/D/-/G); users can program preferred lighting effects through the motherboard software. Moreover, MAKASHI MK50 comes with a 4mm full-view tempered glass side panel for users to show off their brilliant masterpieces.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces the launch of an addressable RGB computer fan series, SquA RGB. SquA RGB made its debut at CES 2019 and caught much attention by its square-shaped lighting and optimized low 300 RPM starting speed. SquA RGB will have Single Pack and 3-Fan Pack for retail market. In the Single Pack, users can plug & play the fan to showcase constant rainbow RGB lighting effect. As for 3-Fan Pack, SquA RGB especially includes ENERMAX integrated RGB control box for users to adjust lighting effects. The fans in both Single Pack and 3-Fan Pack can support synchronizable RGB lighting via motherboards (4-pin RGB header).

ENERMAX, a leading designer and manufacturer of high-end power supplies, announces the launch of MAXREVO 1800, a heavyweight 1800 watt power supply with peak power up to incredible 1900 watt. Characterized by the high-performance transformer, high-density PCB, and FMQ topology, MAXREVO 1800 PSU achieves a housing depth of only 180mm without sacrificing efficiency or performance, compared to its peers that normally come in 220 mm deep. Furthermore, 6 powerful +12V rails and 12 PCI-E connectors provide powerful output capabilities without compromising hardware safety. Specially designed for multi-GPU rigs, video editing workstations, industrial PC, and servers, MAXREVO 1800 is ready to quench the thirst of power-demanding systems.

MAXREVO 1800 is built with patented Turbo Switch; the design can help bring down the temperature of the critical components by 10-15°C. Through simply pressing the Turbo Switch, the PSU fan will spin at max speed (3100RPM) to create extra massive airflow to cool down the components.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, is expanding the acclaimed RGB liquid cooler series, LIQFUSION, with the addition of a 360mm AIO cooler. After the launch of the 240 variant, LIQFUSION has got users' attention and recognition for its cooling performance and brilliant lighting effects. With the larger cooling surface, LIQFUSION 360 is able to easily handle a large amount of heat produced by the overclocked CPUs. Moreover, LIQFUSION comes with an addressable RGB-sync waterblock featuring patented flow indicator, which allows the users to monitor the status of coolant flow. Along with ENERMAX addressable RGB fans, LIQFUSION can create visual appealing lighting effects.

LIQFUSION can sync the RGB lighting with motherboards featuring addressable RGB headers (4-pin assignment: +5V/D/-/G). Users can select preferred effects via the motherboard RGB software with 16.8 million color options. On the other hand, for those who use non-RGB motherboards, they can use the included RGB control box to select preferred lighting color, speed, and effects (10 pre-set effects).

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces the launch of a new all-in-one liquid cooler series, LIQTECH II. Responding the market demand of cooling solution for high-end CPUs, LIQTECH II can deliver enthusiast-grade cooling capacity of 500+ watts (TDP) and is compatible with both Intel and AMD sockets (except AMD sTR4).

Furthermore, certified by main motherboard makers (ASRock, ASUS, Gigabyte, and MSI), LIQTECH II can support the latest addressable RGB lighting synchronization with advanced motherboards featuring addressable RGB headers (pin assignment: 5V/D/-/G) to create dynamic visual effects. LIQTECH II is perfect for overclocked systems, image editing workstations, and high-end gaming machines.

ENERMAX, a leading designer and manufacturer of high-performance PC hardware products, announces the launch of SABERAY White, the premium addressable RGB gaming chassis. This clean, classy, sleek mid-tower gaming castle caught much attention when it made its debut at COMPUTEX 2018. Featuring eye-catching light strips and 3 unique square RGB fans, SABERAY White is a decent combination of performance and aesthetics.

Certified by ASRock, Asus, Gigabyte, and MSI motherboard makers for addressable RGB lighting synchronization, SABERAY White can match lighting colors harmoniously with other system gear for a more appealing and elegant look. Moreover, the gaming chassis includes interchangeable two meshed panels and one acrylic panel, so that users can run depending on their preferred configurations and designs. Furthermore, SABERAY White also comes with a 4 mm full-view tempered glass window for users to showcase their precious rigs.

ENERMAX, a leading designer and manufacturer of high-performance power supply, has collaborated with ASUS to launch RevoBron TGA, a rock-solid gaming power supply tested and certified by ASUS TUF Gaming Alliance to ensure the perfect compatibility with the other gaming components of the league. The semi-modular gaming PSU lineup is equipped with several advanced and unique elements that are higher than the industry standards, which makes the unit the best-in-class power supply for the TUF Gaming PCs. RevoBron TGA can perfectly support mainstream gaming rigs, multimedia systems, or home theater PCs.

Surpassing 80PLUS Bronze efficiency level, RevoBron TGA has several advanced features, including the DC-to-DC circuit, 100% 105°C Japanese electrolytic capacitors, and dual +12V rails, which make the PSU a stable and durable gaming power solution. Moreover, RevoBron TGA also comes with the patented self-cleaning DFR (Dust Free Rotation) fan; the concept of the DFRTM is to make the PSU fan perform a self-cleaning spin for 10 seconds upon startup to blow away the accumulated dust.