Alphacool presents the Rise Aurora 120 mm, a powerful and PWM controllable fan that also features brilliant Digital RGB LED lighting. The Alphacool Rise Aurora fan allows for an impressive airflow of 118.9 m³/h and has high static pressure of 3.17 mm/H₂O. Due to this, the fan is ideally suited for operation on radiators or as a particularly strong case fan. Thanks to the 4-pin PWM connector, the fan can be controlled over the speed range from 0 to 2600 rpm. At 0% PWM control, the fan can be stopped completely. A soft start at start-up increases the life of the fan and reduces the risk of injury. At low speed, the fan is almost silent and provides significant energy savings.

Sharkoon Technologies is an international supplier of high-performance, quality PC components and peripherals. With the REV300, Sharkoon now presents a PC case of a different kind. Besides seven pre-installed PWM RGB fans for optimal cooling, the case also comes with addressable fan LEDs for customized lighting. In addition, since the tempered glass side panel is placed on the right-hand side of the case, the REV300 offers the possibility for a better presentation of the illuminated hardware components.

With seven pre-installed, addressable PWM fans, the REV300 is equipped with maximum cooling capacity as standard: There are three 140-millimeter fans behind the front panel and three 120-millimeter models at the rear of the case, as well as one more with 120 millimeters under the top panel. These RGB fans are supported by the front panel's mesh grille which facilitates the airflow. Water cooling can also be built into the REV300: A radiator of up to 360 millimeters can be installed at the rear, and there is even space for a radiator of up to 420 millimeters at the front, provided that it does not exceed 3.2 centimeters in height. Furthermore, it should not be longer than 46.5 centimeters and no wider than 14.1 centimeters.

Noctua today released its much anticipated NH-P1 CPU cooler as well as the optional NF-A12x25 LS-PWM 120 mm fan. Custom-designed for fanless operation from the ground up, the NH-P1 is capable of cooling modern high-end CPUs with low to moderate heat dissipation completely passively in enclosures with good natural convection. For further enhanced performance or semi-passive setups that only spin up their fans when necessary, the NH-P1 can be outfitted with a low-speed, ultra-quiet 120 mm fan such as the new NF-A12x25 LS-PWM.

"The NH-P1 is our very first passive cooler, and it should be easy to see that we didn't just take a regular heatsink and omit the fan", says Roland Mossig (Noctua CEO). "A lot of engineering work went into designing this unit for fanless operation from the ground up and we're truly proud of the end result. In our completely fanless demo system, the NH-P1 cools an Intel Core i9-11900K running Prime95 at more than 3.60 GHz - this is a lot of processing power and a whopping 125 W kept in check with zero fan noise!"

Tech innovator GELID Solutions unveils the latest 120 mm case fan featuring the Icy Frame Assembly and sophisticated Addressable RGB (ARGB) LED lighting. The STELLA FROST is a product of GELID Solutions GAMER product line. The STELLA FROST introduces a perfect mixture of vibrant design and top-notch cooling technologies. It comes with 8 hub-mounted ARGB LEDs and 16 frame-mounted independent ARGB LEDs to illuminate stylish Dual Ring Lighting and create spectacular RGB effects amplified by the highly reflective Icy Assembly and tidy all-white frame.

The fan also boasts Double Ball Bearing which adds to improve mechanics and ensures ultra-durable functioning. The new impeller brings an optimized blade profile to deliver enhanced cooling. And the carefully designed PWM IC, a core part of the STELLA FROST, eliminates any clicking noise. Additionally, the intelligent GELID PWM (Pulse Width Module) drives the fan in the extended speed range from 500 RPM to 1600 RPM, it constantly keeps the fan silent but accelerates speed whenever higher airflow is needed. The STELLA FROST also bears dual ARGB cabling with a male-plug adapter integrated to facilitate connection of multiple fans in your system.

Alphacool today presents the Eiswolf 2 AIO solution (Reference design with backplate) for AMD Radeon RX 6800/6800XT/6900 and NVIDIA RTX 3080/3090 graphics cards. As with all of our AIO models, we only use copper radiators, however, for the first time, the Alphacool 360 mm NexXxoS ST30 all-copper radiator will be used in one of our GPU "all-in-one" solutions. For the fans, we now install the new Alphacool Aurora Rise 120 mm fan. The fan impresses with a max. statistical pressure of 3.17 mm/H2O and offers a max. air flow of 119.8m3/h, at a speed range of 0-2500rpm which can be controlled via PWM.

The decision to use the larger radiator in conjunction with our new fans provides a significant increase in cooling performance. The AIO is completed with the Eisblock Aurora water cooler, which actively cools all relevant components such as graphics memory and voltage converters in addition to the GPU chip. All components used (radiator, fan, cooler, DC-LT 2 pump) including connectors and hoses are part of the Alphacool custom cooling range and are therefore available separately. This means that we're not just offering a simple AIO solution here, but a real custom water cooling system (pre-assembled & pre-filled). Only the pump housing for the DC-LT 2 pump is a custom design and not available separately. Today we present only the Reference designs. In the near future, more solutions for graphics cards in custom design from various manufacturers will be available.More pictures follow.

Spire is releasing a new series of powerful and dependable 80 PLUS certified ATX power supplies. The EagleForce ATX power supply series aimed at the pc enthusiast en pc gamer. Equipped with selected all high-quality components, supplying optimal power under the most demanding circumstances. The EagleForce units are compliant to the 2.31 version Intel specification standard with advanced circuit design, including better grade A components supporting the newest Intel & AMD dual core & quad core micro-processors.

Auto-thermal fan control, maximizing the air cooling performance whilst maintaining reduced sound levels. Energy sufficient and compliant with the Active Power Factor Correction (APFC) Energy Star & 80 PLUS certified standards. As well as ErP 2013 Lot6, which guarantees that your PSU will use less than 1 W on system standby and lower than 45% transferring efficiency on 5 V standby. Housed in cool black powdered coated enclosures and backed by 2 years manufacturer warranty.

[Editor's note: Our review can be found here for those interested.]

CORSAIR, a world leader in high-performance gaming gear and enthusiast components, today announced the launch of a new range of performance RGB cooling fans, the iCUE SP RGB ELITE Series. With eight vibrant individually addressable RGB LEDs per fan and CORSAIR AirGuide technology for powerful directed airflow, the SP RGB ELITE Series is now available in 120mm and 140mm sizes to cool and illuminate any system. SP120 RGB ELITE fans are available in a Triple Fan Kit with an included iCUE Lighting Node CORE Controller, or as a single fan to expand your system's cooling. SP140 RGB ELITE fans come in a Dual Fan Kit with the iCUE Lighting Node CORE, or as a single fan.

SP RGB ELITE fans are each equipped with eight individually addressable RGB LEDs, putting on a mesmerizing lighting display as they cool your PC. To easily control RGB lighting, the SP120 RGB ELITE Triple Fan Kit and SP140 RGB ELITE Dual Fan Kit include the compact iCUE Lighting Node CORE, connecting to your PC via simple USB 2.0 and SATA connections. With the Lighting Node CORE, lighting effects are customizable through powerful CORSAIR iCUE software and can be synchronized with all CORSAIR RGB devices in your setup to create stunning light shows across the entire iCUE ecosystem.

ARCTIC, one of the leading manufacturers of low-noise PC coolers and components, is adding five new variants to its extensive fan lineup. The black case fans complement the F-Series, which is known for an excellent balance of efficient ventilation, quiet operation and affordable pricing.

With the F8 PWM Black, F9 PWM PST Black, F12 Silent Black, F12 PWM PST CO Black and the F14 Value Pack Black product variants, some of ARCTIC's best-selling standard models are now available in all-black versions. "By producing the black add-on models, we are responding to our customers requests for PC fans with sleek and classic design" said Vincent Andre, technical director at ARCTIC. The products can be found starting now in the ARCTIC webshop, on Amazon and in retail stores.

ARCTIC, a leading manufacturer of low-noise PC coolers and components, presents the P12 Slim PWM PST - a new fan for HTPC cases, SFF and mini PCs. With an installation depth of only 15 mm, this 120 mm fan is ideal for use in compact cases. Limited spacing can make fan installation difficult. That's why ARCTIC has expanded its fan range with the P12 Slim PWM PST. This fan is designed for high static pressure, which also makes it excellently suited for use on CPU coolers and radiators.

The rotation speed of the P12 Slim PWM PST is in the range of 300 to 2100 RPM and is controlled by PWM signal. Synchronous and noise-reduced control of multiple fans is easily possible using PWM Sharing Technology (PST). The newly developed ARCTIC motor with sinusoidal magnetization also contributes to the smooth running of the P12 Slim PWM PST, which keeps commutation oscillations to a minimum.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is excited to announce that the new TOUGHFAN 12 Turbo High Static Pressure Radiator Fan is available for purchase. The TOUGHFAN 12 Turbo is a PWM controlled fan that now performs at a maximum speed of 2500 RPM. These high-quality, great performance fans are made with our 2nd generation hydraulic bearing and metal reinforced hub, which are optimized for high static pressure while maintaining minimal noise levels. The liquid crystal polymer (LCP) fan blades are extremely tensile in strength; their low thermal expansion coefficient can reduce the fan's vibration when running at full speed. If you think you need some extra boost from the Thermaltake's TOUGHFAN series products, don't hesitate to try out the TOUGHFAN 12 Turbo High Static Pressure Radiator Fan.

Phanteks today announced their very first all-in-one liquid CPU coolers, the Glacier One 240MP, 240MPH, 280MP and 360MP. Developed in collaboration with Asetek, they are capable of cooling powerful CPUs while operating silently. The Glacier One is optimized to offer a noise-performance ratio that is best in class with the new silent Phanteks MP fans that now have a higher maximum RPM (2000-2200RPM). The new 120/140 MP PWM fans are premium cooling fans designed with radiators and heatsinks in mind and will also be available separately with the Glacier One launch.

The Glacier One coolers feature a tempered glass infinity mirror pump cap with smooth D-RGB lighting integration. There is also a white edition, the 240MPH, that comes with additional white HALOS D-RGB fan frames to light up the MP fans. The full cover pump cap has a low-profile design that can be mounted magnetically to the pump module to cover all mounting parts, which creates a clean and integrated appearance with the motherboard. Installation is a breeze thanks to the pre-filled all-in-one solution, better clearances, flexible braided tubing and Phanteks Tube Clips that help route the tubing and fan cables for a clean PC interior.

Thermaltake, the leading PC DIY premium brand for Cooling, Gaming Gear, and Enthusiast Memory solutions, is here to share the TOUGHFAN 14 High Static Pressure Radiator Fan is now ready for purchase in both single pack and 2-fan pack. For those who had been eyeing the TOUGHFAN 12 but wanted a 140 mm fan, here's your chance to get the taste of that TOUGHFAN series vibe. These high-quality, great performance fans are PWM controlled and designed to perform at a maximum operating speed of up to 2000 RPM and are optimized for high static pressure while maintaining minimal noise levels. The liquid crystal polymer (LCP) fan blades are extremely tensile in strength; its low thermal expansion coefficient can reduce the fan's vibration when running at full speed. Don't miss out on Thermaltake's latest TOUGHFAN series member, the TOUGHFAN 14 High Static Pressure Radiator Fan.

XPG, a provider of systems, components, and peripherals for Gamers, Esports Pros, and Tech Enthusiasts, today announces the XPG VENTO PRO 120 PWM fan. Designed in collaboration with Nidec, the XPG VENTO PRO 120 PWM is customized for discerning gamers and PC enthusiasts that seek for ultimate in PC cooling. Based on Nidec's famous Gentle Typhoon fan design, the XPG VENTO PRO 120 PWM has a high static pressure of up to 3.15 mm H₂O and can pull up to 75 CFM airflow to circulate into the chassis, making it an ideal air intake or exhaust fan to complement water-cooling systems.

"We congratulate XPG on the launch of the VENTO PRO 120 PWM and are delighted that our fan design is a part of it," said Masayuki Mohri, President & CEO at Nidec. "Along with the incredible cooling capabilities of our Gentle Typhoon fan, we trust gamers and others will revel in the extreme performance offered by the XPG VENTO PRO 120 PWM."

ENERMAX is introducing a new tower CPU cooler family in the form of the ETS-F40 series, which promises heat dissipation of up to 200 W TDP. The coolers feature a compact design, with a single fin stack protruding directly from the baseplate and 4x 6 mm heatpipe array. The ETS-F40 series will be available in part numbers ETS-F40-FS (Essential version, with non-RGB fan); ETS-F40-BK (same as Essential, but with a solid black finish); ETS-F40-BK-ARGB (solid black finish with an ARGB fan); and ETS-F40-W-ARGB (solid white finish with an ARGB fan). Both the ARGB versions also sport RGB lighting in the top plate. The cooler further supports installation of a second fan.

The supplied fans are 140 mm in nature, PWM-controlled affairs which can spin as low as 300 RPM (up to 1200 RPM), if noise is your utmost concern but still want a (somewhat) active cooling solution. Cooler dimensions stand at 140 x 65 x 156 mm (w/ fan) for the essential version, while the added top plate in the others will increase height to 158 mm. The ETS-F40 Essential will be available from this month of October, while the other versions with the ARGB fan will enter the channels in December. The ETS-F40 Essential is currently available in an european etailer for ~€31, which could point to a $29 pricing for the base offering.

In Win today announced the availability of its premium Saturn Series ASN140 and mainstream Jupiter AJ140, 140 mm case fans. Both series provide an attractive soft-glow ARGB lighting effect through their frosted fan blades, illuminating the insides of the case, while the Saturn series also features rigid stripes around its transparent frame that provides a unique effect as the light refracts through.

The Saturn ASN140 provides up to 93.97CFM of airflow, while the Jupiter AJ140 provides up to 100.45 CFM of airflow. Their wide speed range, 4-pin intelligent PWM control and shock-proof rubber mounting pads means they are ideal for either CPU coolers, liquid cooling radiators or as part of an air-cooled PC. Both series are equipped with sleeve bearings to provide lower noise output and a longer lifespan.

Tech innovator GELID Solutions unveils the latest 120 mm case fan supercharged with sophisticated Dual Ring Addressable RGB (ARGB) LED lighting and enhanced cooling techniques. The STELLA is a product of GELID Solutions GAMER product line. The STELLA introduces a perfect mixture of top-notch technologies and vivid design. It comes with 8 hub-mounted ARGB LEDs and 16 frame-mounted independent ARGB LEDs to illuminate stylish Dual Ring Lighting and create spectacular RGB effects. The fan also boasts Double Ball Bearing which adds to improve mechanics and ensures ultra-durable functioning, and features the new high-airflow optimized impeller to deliver enhanced cooling. The carefully designed PWM IC, a core part of STELLA, eliminates any clicking noise. Additionally, the intelligent GELID PWM (Pulse Width Module) drives the fan in extended speed range from 500 RPM to 1600 RPM, it constantly keeps the fan silent but accelerates speed whenever higher airflow is needed.

LIAN LI Industrial Co. Ltd., a leading manufacturer of aluminium chassis and PC accessories, announces the UNI FAN SL120, an innovative approach to reducing cables by interlocking and daisy-chaining the fans. Designed as 120 mm high static pressure PWM fans with addressable RGB LEDs, the UNI FAN SL120 has a newly patented quick-connect daisy-chaining style system that simplifies cable management and mounting efforts. With up to 16 fans (4 sets of 4) under one fan controller, users can easily create an adapted profile to match their fan speed and synchronized lighting effect needs via the highly intuitive L-Connect software. Available in black or white, the UNI FAN SL120 offers a new premium look with lighting effects that do not compromise on performance.

Focused on giving users more control over fan functionality, the clean and intuitive interface of the L-Connect software provides instant speed and RGB light management for individual fans or simultaneous control over all 4 clusters of fans. With 5 fan speed profiles, 14 lighting effects, and control over each effect's color, brightness, direction, and speed, L-Connect allows full customization of the look and feel of the system. Alternatively, users can choose to sync with the motherboard software via the simple toggle of a switch.

LIAN LI Industrial Co. Ltd., a leading manufacturer of aluminium chassis and PC accessories, is proud to announce a new addition to its LANCOOL series with the LANCOOL II MESH PERFORMANCE and LANCOOL II MESH RGB. Built upon the award-winning design and features of the LANCOOL II, the LANCOOL II MESH incorporates new features that improve chassis airflow and offers an updated look. Available in PERFORMANCE and RGB, both variants sport a dense mesh front panel and left PSU shroud panel for better thermal performance, with different fan configuration and I/O ports focused on fan speed control or lighting effect control respectively.

LIAN LI pushes the limits of the LANCOOL II MESH front panel and left side panel with a mesh density that offers the least amount of resistance for maximum airflow while limiting dust infiltration. In addition, the honeycomb pattern perforations located at the top and rear of the case provide for a boost in ventilation. To complement the added benefits of the mesh, internal modifications have been implemented at the top of the PSU shroud with two new modular openings. Users can either leave the two openings uncovered for an unobstructed airflow between the top and the bottom chamber, mount them with fans to increase the ventilation efficiency, or use the included perforated mounting plates to install 2 SSDs without suffocating the PSU chamber.

Raijintek today introduced the EOS 12 RBW ADD line of 120 mm case fans. Based on the design of the original EOS 12 fans, the new EOS 12 RBW ADD comes in single-unit and three-unit packs. It is optimized both for ventilation and for use in liquid cooling setups owing to its fairly good static pressure. Featuring a hydraulic bearing rated for 40,000 hours, the fan takes in 4-pin PWM for its main function, and spins between 800 to 1,800 RPM, with a maximum air-flow of 75 CFM, maximum static pressure of 2.3 mm H₂O, and a maximum noise output rated at 28 dBA. It uses a 3-pin addressable RGB connection for its illumination. The three-unit pack includes a ARGB+PWM controller with an RF remote control. The frames of these fans feature rubberized mounts that dampen vibration. The company didn't reveal pricing.

ASUS today rolled out the VA27DQSB Eye Care Monitor, designed for multi-display setups in office environments, as you can stack these display along the sides and above, in a 1x3 or 2x3 configuration. The VA27DQSB is a 27-inch monitor with Full HD (1920 x 1080 pixels) resolution, an IPS panel with 178°/178° viewing angles, 75 Hz refresh rate, VESA Adaptive Sync support, and TUV Rhienland-certified low blue-light and flicker-free brightness adjustments (uses a non-PWM method of dimming the LEDs). The included stand offers height adjustments by 150 mm, 90° rotation, tilt up to 35°, and sideways pivot, besides being detachable for use with VESA-compatible multi-monitor mounts. The company didn't reveal pricing.

DeepCool today introduced the Gamer Storm TF-120S and TF-140S fan sets optimized for liquid-cooling applications owing to high static pressure, and a frame-design that's better suited for mounting along radiators. These fans are an evolution of the TF-series fans DeepCool debuted in 2015. The TF-120S is a 120 mm fan that comes in pack of four fans; while the TF-140S is a 140 mm fan, shipping in packs of three. Both SKUs include 4-port PWM fan hubs so a single PWM signal can power all fans in the set.

Much like the original TF-series from 2015, the TF-120S and TF-140S feature "double layer fan blade" design, which when combined with the "wasp waist" fan frame design work to increase air-flow and static pressure. The TF-120S spins between 500 to 1,800 RPM, pushing up to 64.4 CFM of air, with a pressure of 2.33 mm H₂O, and up to 32.1 dBA noise output at max speed; while the TF-140S does 400 to 1,600 RPM, pushing 97.03 CFM of air-flow, with 2.00 mm H₂O pressure, and up to 39.8 dBA noise output at max speed. The company didn't reveal pricing.

Cooler Master earlier this week rolled out the MasterFan ARGB + PWM Hub (model: MFX-ZHHN-1NNN6-R1), a handy accessory to simplify both fan speed and lighting management. The device, which is slim enough to be tucked away in the crawlspace behind the motherboard tray, puts out six each of 4-pin PWM and 3-pin addressable-RGB connections. It draws power from a SATA power connector, and takes input from one each of 4-pin PWM and 3-pin ARGB connections from your motherboard. Among the six downstream PWM headers is a high-powered header marked in red, meant for multi-fan units. The hub comes in a metal body with a transparent plastic top, it measures 103 mm x 65 mm x 16 mm (WxDxH). The company didn't reveal pricing.

Update May 29th: Cooler Master informed us that this product is only officially available in the Asia-Pacific, Latin America, Middle East, and China regions, although you may find it from 3rd party sellers in other areas of the world.

Cooler Master added a new White color variant to its MasterFan MF120 Halo series, which debuted in January. It sees white take up almost the entire fan frame, including the rubberized bits, a decal over the impeller hub, and the impeller itself has a brighter tint. As with the original, the MF120 Halo White is characterized by two independent lighting zones, one made up of diodes in the impeller hub, and the other along the mouth of the frame, on both ends. There are no mechanical changes from the original. The fan takes in a single 3-pin ARGB connection for both lighting zones, and 4-pin PWM header for its main function. It spins between 650 to 1,800 RPM, pushing up to 47.2 CFM of air, at 1.6 mm H₂O pressure, and noise output up to 30 dBA. Its bearing has a rated lifespan of 160,000 hours. It is expected to be priced around $18 a piece.

Thermalright introduced the TY-121BP FDB, a 120 mm case fan optimized for circulation applications. Built in a standard 25 mm-thick 120 mm format with rubberized frame mounts. The package includes rubber bolts in addition to metal screws. The fan features a long life (>40,000-hours rated) fluid-dynamic bearing. Taking in 4-pin (PWM) input, it spins between 600 - 1,800 RPM pushing 25.76 CFM of air at its lowest speed, and 77.28 CFM at top speed, with up to 2.70 mm H2O air-pressure. The noise output proportionately ranges between 19 to 25 dBA. The fan is currently selling in single-piece packages priced at $20, multi-fan packs are also in the works.

be quiet!, the market leader in PC power supplies in Germany since 2007, introduces Pure Rock 2. This update to the highly successful, entry-level Pure Rock cooler from 2014 ticks all the right boxes as the ideal upgrade from stock coolers by Intel and AMD. Pure Rock 2 offers an excellent price-performance ratio with a great cooling efficiency of 150 watts TDP, low noise level, and high memory compatibility. Even demanding, high-resolution multimedia or advanced gaming applications will not bring this cooler to its knees.

Pure Rock 2 is equipped with a Pure Wings 2 120 mm PWM fan, which has received accolades for its low noise level of no more than 26.8 decibels, even when the fan is spinning at its maximum speed of 1,500 rpm. Nine airflow-optimized fan blades reduce noise-generating turbulence and increase air pressure, while the four high-performance 6 mm heat pipes with heat pipe direct touch (HDT) technology provide a slightly improved cooling performance compared to the popular preceding model. Thanks to their impeccable build quality, Pure Wings 2 fans have a lifespan of more than 80,000 hours. Customers benefit from a three-year manufacturer's warranty for Pure Rock 2.