Phenom 9950 overclocking

[Chicken Patty]

Where is your new thread? I was supposed to pick all my gear up on the 24th but some more bill came in and pushed it to the 9th of Jan. So I'll be putting off the mods for a while and just doing the build and getting right into the tweaking.

I was wondering CP, the 9850 thread is a low voltage OC thread and I'll be tweaking for max OC. Is there a regular 9850 OC thread?

Here is fulls new thread, but as you see it was here also lol

http://forums.techpowerup.com/showthread.php?t=79094

Well that 9850 thread became an overclocking thread too bro lol. But if you want you can start your own and i'll be more than gladly able to help you there just link me to it lol.

 

[ChaoticAtmosphere]

Here is fulls new thread, but as you see it was here also lol

http://forums.techpowerup.com/showthread.php?t=79094

Well that 9850 thread became an overclocking thread too bro lol. But if you want you can start your own and i'll be more than gladly able to help you there just link me to it lol.

Well I wouldn't want to create another 9850BE/M3A79-T/OC'ing thread so I'll just post in Full's M3A79-T OC'ing thread when I finish my build. I will, however, Start a thread just for my build. I already tore my case to pieces thinking I'd mod it but I love beer way too much and well, it looks like I'll be paying off my parts before purchasing a dremmel and paint!!

 

[Chicken Patty]

Well I wouldn't want to create another 9850BE/M3A79-T/OC'ing thread so I'll just post in Full's M3A79-T OC'ing thread when I finish my build. I will, however, Start a thread just for my build. I already tore my case to pieces thinking I'd mod it but I love beer way too much and well, it looks like I'll be paying off my parts before purchasing a dremmel and paint!!

hahahaha lol.

Well just post there, lots of people there to help you including me

 

[p_o_s_pc]

I think i asked if higher HT also went for the athlon (non phenom) and it turns out that it doesn't make much of a difference.

1500 HT

900HT

BTW sorry CP for posting about the athlon in your phenom thread

 

[Meizuman]

http://valid.canardpc.com/show_oc.php?id=472413



Not bad, eh? I have this OC now and I did some benching, no problem to get wPrime 2.00 1024m test through. Also I submitted my first wPrime 1.55 1m result to HWbot.org, it was 10.062s. 10th place. There is more to be done, but so far so good.

Today I proved myself that ACC definately has major effect on clocking. My rig hasn't booted ever before with CPU multi of x17. I started trying to boot with x17 first with ACC disabled, then +2, +4 and when I hit +6, it went all the way to Windows. Every step I took with ACC got me a little farther. But now I am kinda stunned to see that this actually seems to work... Hopes are high now but I assume this OC will not be stable enough... Time and benching will tell. That wPrime 1024 really gave me these high hopes. My CPU hitted no more than 50C while doing the bench. I have Vcore at 1.44 - 1.47 depending on load. Wish me luck with this!

 

[Chicken Patty]

I think i asked if higher HT also went for the athlon (non phenom) and it turns out that it doesn't make much of a difference.




BTW sorry CP for posting about the athlon in your phenom thread

nothing to worry about dude, please post more if you desire

 

[Meizuman]

I think i asked if higher HT also went for the athlon (non phenom) and it turns out that it doesn't make much of a difference.

1500 HT


900HT
[IMG]


BTW sorry CP for posting about the athlon in your phenom thread[/QUOTE]

So this is HT Link or NB? Not familiar with Athlons... Doesn't even have NB?? (nothing in CPU-Z's NB Frequency).

This looks like it is REALLY case sensitive. When I did some (not-so professional) testing, it looked like every notch in HT Link multi gave 1FPS more (all the way to 2.5GHz). Then the other day when I was testing with different settings, I didn't even see any change. I admit that the RT HDR IBL is not good program when benching because freezing the screen and trying to get stable load is difficult. It keeps pumping the FPS so much that its quite hard to keep track where it is going. So I should use some different software for that.

 

[merkk]

The ACC on my Foxconn board is like nite to day on cpu overclocking . I have a 9850be i got when they frist came out on my old board the best stable overclock was 2.7 it did boot into windows at 2.9 but crash shortly after . Now with ACC at +6% i ran 3.2 stable but need 1.53v to do it so i back it back down to 3.1 at 1.45v . If i trun ACC off and try to posted using the same setting the rig will never even boot .

 

[Chicken Patty]

The ACC on my Foxconn board is like nite to day on cpu overclocking . I have a 9850be i got when they frist came out on my old board the best stable overclock was 2.7 it did boot into windows at 2.9 but crash shortly after . Now with ACC at +6% i ran 3.2 stable but need 1.53v to do it so i back it back down to 3.1 at 1.45v . If i trun ACC off and try to posted using the same setting the rig will never even boot .

my 9850BE was stable up to 3150 MHz @ 1.42v. With ACC on I went 3.55 Ghz at 1.456v. So its a world of a difference. I think the people that say ACC is no difference, just have a really bad chip that doesn't clock well at all and even with the help of ACC it can't run stable at your above average clock. just my .02 cents

 

[Assassin48]

Phenoms come out in Jan
yesterday i was on the egg on they had 41 amd chips and 26 intels and today they had 44 amd and 29 intels i was so excited but then i look and NO PHENOM

2 more weeks i guess

 

[Chicken Patty]

Phenoms come out in Jan
yesterday i was on the egg on they had 41 amd chips and 26 intels and today they had 44 amd and 29 intels i was so excited but then i look and NO PHENOM

2 more weeks i guess

i guide myself the same way, but I noticed that more chips doesnt have to be because of the Phenom II's lol.

 

[Assassin48]

UPDATE:

My fittings are coming in today so i can finally use my computer and ill post some Overclocking Results Soon

Merkk how do you enable Raid Foxconn Board?

 

[p_o_s_pc]

So this is HT Link or NB? Not familiar with Athlons... Doesn't even have NB?? (nothing in CPU-Z's NB Frequency).

This looks like it is REALLY case sensitive. When I did some (not-so professional) testing, it looked like every notch in HT Link multi gave 1FPS more (all the way to 2.5GHz). Then the other day when I was testing with different settings, I didn't even see any change. I admit that the RT HDR IBL is not good program when benching because freezing the screen and trying to get stable load is difficult. It keeps pumping the FPS so much that its quite hard to keep track where it is going. So I should use some different software for that.

It is the HT link

 

[merkk]

Assassin
I'am doing a simple raid-0 .You start with getting the raid drivers off the mother board disk for the OS you are using . You need to put them on a floppy or UBS memory stick .Next boot to the bios change the sata settting to raid than reboot pc and wild it booting you have to hit ctrl+f or a don't remeber for sure but it will tell you the bottons when it boot up after you have trun raid on in the bios.It will boot to a screen and you will build your raid set-up there take you time read what it says . It will give you 4 screen to pick form each one dose diff stuff. Now i have always done my raid with a new install of the OS so once you got your raid set-up builded i put my OS disk in my d drive and put the floppy or usb memory stick into the pc and reboot start os install . It going to tell you there no drive in the pc and ask for 3 party driver that when you tell it to search A drive or usb drive (vista you tell it to search and it will find it) than finsh the install of the os. There a raid driver you put in after the os is install and ulity if you want (there on the mother board disk) . That for vista XP not the same . When first starting install with XP it going to ask you for 3 party drivers hit f6 if i rember right (you have to be right on top of the install it going to ask you for the 3 party driver in the frist few sec. of the OS install ) YOU MUST HIT THE RIGHT F KEY in the right time or you have to start the install over again . For XP you are going to need a floppy driver for the install of the raid drivers .Once you got the raid driver install finsh the OS install than put the raid driver in off the mother board disk . Hope this help sorry for the bad spelling and wrighting a dam book .

 

[Assassin48]

wow alot of writing

i have everything ready to do this but right now i have 1tb hdd and 1 300gb velociraptor hdd is it worth putting them in raid 0 or should i get another 300gb Velociraptor and use the 1tb for extra storage


Thanks Merkk

 

[merkk]

I think if you are going raid-0 do it with 2 300 gb velociraptor and the 1TB
drive as storage like you were think would be the way to go .

 

[Meizuman]

Have you heard that AMD is planning on new CRAZY OC session with Finnish guys (Macci, Sampsa Kurri and SF3D). They will be using liquid helium, and the plan is to first freeze up the copper pot with LN2 and then slowly start adding the helium. AMD is paying all this and they will be having lots of MBs and chips to try with. They will do this in CES 09 event.

[source]

Translated with Google

 

[Assassin48]

Have you heard that AMD is planning on new CRAZY OC session with Finnish guys (Macci, Sampsa Kurri and SF3D). They will be using liquid helium, and the plan is to first freeze up the copper pot with LN2 and then slowly start adding the helium. AMD is paying all this and they will be having lots of MBs and chips to try with. They will do this in CES 09 event.

[source]

Translated with Google

I Fell a Roadtrip coming on

Its only a 8hr drive

 

[Meizuman]

On the muropaketti's (cerial box ) website they are asking people about liquid helium and if someone has more experience about it. You can see the comments in the link...

 

[ChaoticAtmosphere]

Have you heard that AMD is planning on new CRAZY OC session with Finnish guys (Macci, Sampsa Kurri and SF3D). They will be using liquid helium, and the plan is to first freeze up the copper pot with LN2 and then slowly start adding the helium. AMD is paying all this and they will be having lots of MBs and chips to try with. They will do this in CES 09 event.

[source]

Translated with Google

Google needs work on translating but liquid helium? should be interesting to see the results!

 

[p_o_s_pc]

-270c that should give some vary cool results

 

[Skywalker12345]

how do you use ACC? i have a gigabyte GX board and i dont see it anywhere in the bios?

 

[ShadowFold]

I got my Phenom 9750 today. I don't know where else to put this and this seems like a nice AMD OC thread

 

[eidairaman1]

how do you use ACC? i have a gigabyte GX board and i dont see it anywhere in the bios?

Gigabyte Bios usually shadow their options until you access it via a Keystroke (pain for the enthusiast but good thing for the average joe)

 

[Chicken Patty]

I got my Phenom 9750 today. I don't know where else to put this and this seems like a nice AMD OC thread

no biggie bro, here is fine, once you post a few more benches, we can maybe have the mods rename the thread???? Make a note on the first post that 9750 benchmarks start on page whatever #

so anything special you notice of the 9750? any feedback?