Phenom 9950 overclocking

[fullinfusion]

Chicken Patty,


Pics as requested!!

Nice rig Dusty.... where is the water pump? is it built into the floor stand unit?
you have alot of hose and im thinking you don't have a strong enough pump to move that volume of water.... did you tilt the radiator to see if there is air trapped in the radiator?

 

[Chicken Patty]

Nice rig Dusty.... where is the water pump? is it built into the floor stand unit?
you have alot of hose and im thinking you don't have a strong enough pump to move that volume of water.... did you tilt the radiator to see if there is air trapped in the radiator?

also that is a passively cooled rad, that could be a problem !

 

[Assassin48]

can you make the hoses shorter if you can then do make

if you have any money get a better wc setup been reading reviews on it and some say it developed some leaks and pump might be an issue

 

[eidairaman1]

you dont want them too tight, just a little slack, perhaps possibly route them better lol.

 

[Chicken Patty]

can you make the hoses shorter if you can then do make

if you have any money get a better wc setup been reading reviews on it and some say it developed some leaks and pump might be an issue

i say building your own water setup is the best. But if thats too much hassle here is a really good one already put together.


http://www.petrastechshop.com/pecod4.html

 

[p_o_s_pc]

Chicken Patty,


Pics as requested!!

looks nice. maybe adding the optional fan to that would keep that beast undercontrol better

 

[Assassin48]

how could i miss the videos?
http://www.youtube.com/watch?v=4X__HTuQ1CA

 

[dustyshiv]

Nice rig Dusty.... where is the water pump? is it built into the floor stand unit?
you have alot of hose and im thinking you don't have a strong enough pump to move that volume of water.... did you tilt the radiator to see if there is air trapped in the radiator?

Fullinfusion,

The reserator has a water pump built into the tower. I heard on newegg that the built in water pump was not strong enough. But i had only two choices in here either the Zalman reserator or the Gigabyte Galaxy. So went with the reserator.

Yes, I did shake the reserator and there r no water bubbles in the hose. Planning to buy GPU water block for my next upgrade. Hence didnt cut the hose.

Btw...How would it be if I were to add a secondary pump (swiftech)in the middle of the circuit. Has anyone tried that? Would that increase the flow rate?

 

[fullinfusion]

Fullinfusion,

The reserator has a water pump built into the tower. I heard on newegg that the built in water pump was not strong enough. But i had only two choices in here either the Zalman reserator or the Gigabyte Galaxy. So went with the reserator.

Yes, I did shake the reserator and there r no water bubbles in the hose. Planning to buy GPU water block for my next upgrade. Hence didnt cut the hose.

Btw...How would it be if I were to add a secondary pump (swiftech)in the middle of the circuit. Has anyone tried that? Would that increase the flow rate?

you don't wanna shake the rad mate.... if you can lay the thing over so its laying flat as long as the pump wont cavitate the water.... is there any way you could just by-pass the on-board pump and install the higher volume pump?

 

[fullinfusion]

how could i miss the videos?
http://www.youtube.com/watch?v=4X__HTuQ1CA

and I also lol... thanks for the link Assassin

 

[dustyshiv]

you don't wanna shake the rad mate.... if you can lay the thing over so its laying flat as long as the pump wont cavitate the water.... is there any way you could just by-pass the on-board pump and install the higher volume pump?

Not unless I dismantle the whole unit and fix another pump! But how would adding an additional pump in the circuit work? Any thoughts on that or has anybody tried that?


Thnx for the replies, btw!!

 

[fullinfusion]

Not unless I dismantle the whole unit and fix another pump! But how would adding an additional pump in the circuit work? Any thoughts on that or has anybody tried that?


Thnx for the replies, btw!!

where's your sense of adventure?
But any way... yes it will help.... how much? know one knows...
Is there any way to get at the pump and remove the lines and set anouter pump in?
you should see my thermal take 2 bay water cooling settup!! i totally stripped it down and didnt cost me more than 5 dollars to make the big switch..
Before

After

 

[Chicken Patty]

Hey Full That Looks Sweet Dude, I'll Post A Few New Pics Of The Rig Soon!

 

[fullinfusion]

Hey Full That Looks Sweet Dude, I'll Post A Few New Pics Of The Rig Soon!

Hey thanks alot CP with ketchup in it lol....

hey i think i found the pronlem with my glitchy o/c besides the razor mouse driver giving me the bsod!!!! i believe i needed to let this 79-T mobo run its paces and do its normal burn in.... im now stable @ 222x14=3108mhz
i now leave the cpu-nb volts on auto...sb at 1.24 and running ACC on +2 with a cpu voltage of 1.5v and my temp is low 30's idle and 43ish running Vantage during the cpu test's.... SM im coming for ya bro!!!!

 

[fullinfusion]

Hey Full That Looks Sweet Dude, I'll Post A Few New Pics Of The Rig Soon!

hey CP i have a short video clip of my rig running full out playing GOW.... how do i send it to ya? It sounds like a bloody jet engine running while im playing!!!

 

[fullinfusion]

Hey Full That Looks Sweet Dude, I'll Post A Few New Pics Of The Rig Soon!

SWEET BRO CANT WAIT!!!!

 

[Chicken Patty]

SWEET BRO CANT WAIT!!!!

here you go, just put in my 120.2 rad. this is for now, these effin' i7's run extremely hot bro, but for now it'll get it done.


What I plan to get in the future is a BIX 120.4 rad with a new pump/res and 1/2" tubing , that should keep it cool.

before

After

 

[fullinfusion]

here you go, just put in my 120.2 rad. this is for now, these effin' i7's run extremely hot bro, but for now it'll get it done.


What I plan to get in the future is a BIX 120.4 rad with a new pump/res and 1/2" tubing , that should keep it cool.

before

After

F'n beautifull bro!!!! one suggestion though.... remove the twin fans from behind the rad... it's causing the air to do weird shit and not let clean cool air thou the rad!
i may know shit about certain things but i can tell ya about the water cooling.... if you dont wanna remove both fans than unplug the one closest to the case and run it for a bit and i bet your temps fall at least by 4c

sorry it took me a few days to give you a mark06 bench CP so here ya go!!! nice and stable

 

[Chicken Patty]

Brad thats nice bro, not bad of a score of all, I could only imagine what that card would do in my hands

Well two "fans' you are talking about, that is empty, its just the border. so the fans working are the ones you see pulling thru the rad, its the only way I can mount it.

 

[fullinfusion]

Brad thats nice bro, not bad of a score of all, I could only imagine what that card would do in my hands

Well two "fans' you are talking about, that is empty, its just the border. so the fans working are the ones you see pulling thru the rad, its the only way I can mount it.

hey David thanks bro but can you take a pic of the bolting from the back of the case to the rad?
you show one fan at the top of the rad! the bottom two im concerned about.... and hey, ya never know when i upgrade gpu's i may send you a late x-mas prez bro!!!

 

[Chicken Patty]

hey David thanks bro but can you take a pic of the bolting from the back of the case to the rad?
you show one fan at the top of the rad! the bottom two im concerned about.... and hey, ya never know when i upgrade gpu's i may send you a late x-mas prez bro!!!

he dude you do that and I will personally go visit you and give you my i7 rig!!! after I bench your card of course lol. btw, THERE IS ONLY TWO WORKING FANS ON THE RAD, THE TWO THAT I USED TO MOUNT IT ARE EMPTY, THERE IS NO FAN IN THERE, JUST THE OUTER PART OF THE HOUSING, NO FAN!!! ILL TAKE A PIC LATER WHEN THE CAMERA CHARGES, MY BUDDY BROUGHT IT OVER WITH NO BATTERY.

 

[fullinfusion]

Ok im going to test this and its stable!!!! Woohoo!!!! fuck the cpu-nb volt!!! thats whats been holding me back... i leave it on auto and B.I.N.G.O she's stable....

 

[fullinfusion]

sorry this is what im moaning about lol... (last post)

 

[Chicken Patty]

Ok im going to test this and its stable!!!! Woohoo!!!! fuck the cpu-nb volt!!! thats whats been holding me back... i leave it on auto and B.I.N.G.O she's stable....

For some reason mine worked best when it was matched or close to the CPU voltage. oh well all chips are different!

 

[fullinfusion]

he dude you do that and I will personally go visit you and give you my i7 rig!!! after I bench your card of course lol. btw, THERE IS ONLY TWO WORKING FANS ON THE RAD, THE TWO THAT I USED TO MOUNT IT ARE EMPTY, THERE IS NO FAN IN THERE, JUST THE OUTER PART OF THE HOUSING, NO FAN!!! ILL TAKE A PIC LATER WHEN THE CAMERA CHARGES, MY BUDDY BROUGHT IT OVER WITH NO BATTERY.

Hahahaha time will tell my friend and please dont yell lmao!!!

Ok so your using the fan housing as a spacer hey?....(no fan blades in the middle) kinda works like a tunnel ram hey!!!