WPrime Benchmark

[Kei]

Update before you update

Okay I just did one last run to get the last bit I'm going to try for (seriously this time) with the current stock cooler and mismatched ram.

............................also I know it's rude but I had to do a Dual Core run too since CP did his and posted with his 9950. I can say I wasn't a complete ____ (fill in the blank) so I didn't run the highest setting under dual core but close enough.

Kei

 

[Chicken Patty]

Okay I just did one last run to get the last bit I'm going to try for (seriously this time) with the current stock cooler and mismatched ram.

............................also I know it's rude but I had to do a Dual Core run too since CP did his and posted with his 9950. I can say I wasn't a complete ____ (fill in the blank) so I didn't run the highest setting under dual core but close enough.

Kei

thats why I got them labeled

Updating now, allow me like ten minutes.

 

[DOM]

Okay I just did one last run to get the last bit I'm going to try for (seriously this time) with the current stock cooler and mismatched ram.

............................also I know it's rude but I had to do a Dual Core run too since CP did his and posted with his 9950. I can say I wasn't a complete ____ (fill in the blank) so I didn't run the highest setting under dual core but close enough.

Kei

why are you using an old cpu-z lol and why not a cpu-z in the dual core run cuz ur still running 4 cores

 

[Chicken Patty]

Okay I just did one last run to get the last bit I'm going to try for (seriously this time) with the current stock cooler and mismatched ram.

............................also I know it's rude but I had to do a Dual Core run too since CP did his and posted with his 9950. I can say I wasn't a complete ____ (fill in the blank) so I didn't run the highest setting under dual core but close enough.

Kei

kei was that 20sec. pass the dual core one, sorry screenshot is a bit confusing.

 

[Chicken Patty]

ok I updated the scoreboard, I had to remove the colors, was getting too difficult with the coding when editing. Fastest in each category is highlighted in Red, then the fastest for each brand is in black bold text.

 

[Kei]

Special screenshot update just for Dom!

kei was that 20sec. pass the dual core one, sorry screenshot is a bit confusing.

Yes it was see the new screenshot at bottom. Now update again and give me my crown!

why are you using an old cpu-z lol and why not a cpu-z in the dual core run cuz ur still running 4 cores

Haha, hush Dom! I updated that screenshot just for you.

Kei

 

[Chicken Patty]

here is a run of the core i7, all default, turbo mode off (21x multi), and with everything you see open, fire fox, msn, aim, real temp, etc.

Gotta love HT for these type of benchmarks

 

[Chicken Patty]

Yes it was see the new screenshot at bottom. Now update again and give me my crown!



Haha, hush Dom! I updated that screenshot just for you.

Kei

Kei, you are now the quickest AMD in the dual core category

 

[Chicken Patty]

cdawall, you are still the quickest true dual core for AMD

 

[Kei]

VICTORIOUS! Hahahahahaha...I feel so dirty but I'm only following YOUR example because you did it first!

i7 should have it's own planet because this one isn't big enough to hold the benchmarks it's capable of........

I did nearly piss myself when I saw the PII 940 in the freakin 6 second range!

Kei

Edit: And TECHNICALLY speaking chuck216 is the fastest True AMD Dual Core because cdwall is cheating too using a Kuma which is just a Phenom that's been jacked of two cores! We all know what a Kuma really is.

 

[cdawall]

cdawall, you are still the quickest true dual core for AMD

thats ok ill knock his ass outta 1st place i still have a 945BE on the way and a really really good mobo


oh and way better ram 1150 CL5 on a 2x2GB kit

 

[Kei]

thats ok ill knock his ass outta 1st place i still have a 945BE on the way and a really really good mobo


oh and way better ram 1150 CL5 on a 2x2GB kit

First off I have to say.........you're a cheater using that super engineering ultra mega nasty extreme chip.

Add to that....1150Mhz CL5 is pretty nice but ummm...what will you do when I take the 800Mhz (clocked to 1012Mhz cl5) ram out and only leave my 1141Mhz CL4 in the case?!? Bet you didn't know I was holding out on you guys hahaha. I'm using mixed ram sets right now because I'm being lazy and don't want to take the slower ram out of the case to do a run with only the (originally 1150Mhz CL5) super fast ram in there.

It seems as though in order to get near you I'm gonna have to do things....crap but you've got an unlocked northbridge so I'm screwed anyway because I can't get any higher than 2.3Ghz due to the locked 9x multiplier!

DAMN YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Kei

 

[cdawall]

First off I have to say.........you're a cheater using that super engineering ultra mega nasty extreme chip.

Add to that....1150Mhz CL5 is pretty nice but ummm...what will you do when I take the 800Mhz (clocked to 1012Mhz cl5) ram out and only leave my 1141Mhz CL4 in the case?!? Bet you didn't know I was holding out on you guys hahaha. I'm using mixed ram sets right now because I'm being lazy and don't want to take the slower ram out of the case to do a run with only the (originally 1150Mhz CL5) super fast ram in there.

It seems as though in order to get near you I'm gonna have to do things....crap but you've got an unlocked northbridge so I'm screwed anyway because I can't get any higher than 2.3Ghz due to the locked 9x multiplier!

DAMN YOU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Kei

do you really want to play the ram game i have 2x1GB of D9's sitting in another rig i could pull and do a murder run on 1300 CL4@2.6v sound good to you? or wait a couple months and really knock you out with DDR3

 

[Kei]

Haha, you buy DDR3 and I'll buy DDR3 I'm just waiting for ASUS to announce the new AM3 board which is why I'm still using my SB600 board now.

As for ram you want NONE....no wait....okay you win I'll leave you alone. I've thought about doing a murder run on the ram I have in now but never even tried to overclock them normally yet. I've seen these sticks go to 1200Mhz+ still with CL5 timings but I have nothing for those monster sticks which should remain in the other rig.

Myself and CP are patiently waiting for the AM3 boards to be announced before we decide what to do next with out AMD rigs. I couldn't help myself with the PII chips I wanted it so badly I had to have it so I went there. Since the AM3's are only a very very short time away I won't lose anything if they come out and I want to sell this one and get that.

I figure it's smart though that even though I'm limited with my board now I wait until I see the price on the AM3 boards before I buy a new board yet. If the AM3 is crazy good (which for sure it will be) then I'll go that way, if not then I'm still smart because everyone else will want AM3 and I can get an AM2+ for dirt cheap in those few weeks. Either way I win

Either way I love this PII 920 and didn't spend nearly anything on it (~ $100) so I've lost nothing at all and will gain when/if I sell it anyway haha. I keep a keen eye on prices for stuff I've still got so that whenever I upgrade anything I never spend more than a few bucks to get it, my computers buy me new computers :cheers:

Kei

P.S.
I beg of you to leave that ridiculii (that's multiple ridiculous and I own the copyright to that word) ram in the other rig because my head couldn't take the beating.

 

[cdawall]

Haha, you buy DDR3 and I'll buy DDR3 I'm just waiting for ASUS to announce the new AM3 board which is why I'm still using my SB600 board now.

As for ram you want NONE....no wait....okay you win I'll leave you alone. I've thought about doing a murder run on the ram I have in now but never even tried to overclock them normally yet. I've seen these sticks go to 1200Mhz+ still with CL5 timings but I have nothing for those monster sticks which should remain in the other rig.

Myself and CP are patiently waiting for the AM3 boards to be announced before we decide what to do next with out AMD rigs. I couldn't help myself with the PII chips I wanted it so badly I had to have it so I went there. Since the AM3's are only a very very short time away I won't lose anything if they come out and I want to sell this one and get that.

I figure it's smart though that even though I'm limited with my board now I wait until I see the price on the AM3 boards before I buy a new board yet. If the AM3 is crazy good (which for sure it will be) then I'll go that way, if not then I'm still smart because everyone else will want AM3 and I can get an AM2+ for dirt cheap in those few weeks. Either way I win

Either way I love this PII 920 and didn't spend nearly anything on it (~ $100) so I've lost nothing at all and will gain when/if I sell it anyway haha. I keep a keen eye on prices for stuff I've still got so that whenever I upgrade anything I never spend more than a few bucks to get it, my computers buy me new computers :cheers:

Kei

P.S.
I beg of you to leave that ridiculii (that's multiple ridiculous and I own the copyright to that word) ram in the other rig because my head couldn't take the beating.

i will be nice and leave the patriots out of this but my micron based 2x2GB crucial reds are not going to have an issue clocking with that phenom II

 

[Kei]

Patriots!?! I didn't know they were Patriots......so are mine but I never even bothered to see how high they'd really go. Heck I don't even remember if they're D9's (isn't that funny) so they could possibly do something pretty amazing too.

I've always wished I could get them in a 2x2Gb kit like you can with the OCZ FlexII's in 1150Mhz flavor. Damn shame, I've thought about picking up another set of the 2Gb kit but I want to have at least 6-8Gb of ram in my machine so I didn't pick them up even though the speed would be insane.

Maybe before I change boards and once I get some new ram in I'll put some serious volts into those Patriots and see what they'll really do. Btw, are you talking Vipers or 'regular' Extremes? I can't fit the OCZ FlexII's or Vipers with my Xigmatek so I went with the 'regular' Extreme's in the 1150Mhz stock flavor.

Kei

 

[cdawall]

Patriots!?! I didn't know they were Patriots......so are mine but I never even bothered to see how high they'd really go. Heck I don't even remember if they're D9's (isn't that funny) so they could possibly do something pretty amazing too.

I've always wished I could get them in a 2x2Gb kit like you can with the OCZ FlexII's in 1150Mhz flavor. Damn shame, I've thought about picking up another set of the 2Gb kit but I want to have at least 6-8Gb of ram in my machine so I didn't pick them up even though the speed would be insane.

Maybe before I change boards and once I get some new ram in I'll put some serious volts into those Patriots and see what they'll really do. Btw, are you talking Vipers or 'regular' Extremes? I can't fit the OCZ FlexII's or Vipers with my Xigmatek so I went with the 'regular' Extreme's in the 1150Mhz stock flavor.

Kei

patriot extremes DDR800 CL5@2.2v


this style heatspreader

mine are some old ass sticks

 

[Chicken Patty]

Haha, you buy DDR3 and I'll buy DDR3 I'm just waiting for ASUS to announce the new AM3 board which is why I'm still using my SB600 board now.

As for ram you want NONE....no wait....okay you win I'll leave you alone. I've thought about doing a murder run on the ram I have in now but never even tried to overclock them normally yet. I've seen these sticks go to 1200Mhz+ still with CL5 timings but I have nothing for those monster sticks which should remain in the other rig.

Myself and CP are patiently waiting for the AM3 boards to be announced before we decide what to do next with out AMD rigs. I couldn't help myself with the PII chips I wanted it so badly I had to have it so I went there. Since the AM3's are only a very very short time away I won't lose anything if they come out and I want to sell this one and get that.

I figure it's smart though that even though I'm limited with my board now I wait until I see the price on the AM3 boards before I buy a new board yet. If the AM3 is crazy good (which for sure it will be) then I'll go that way, if not then I'm still smart because everyone else will want AM3 and I can get an AM2+ for dirt cheap in those few weeks. Either way I win

Either way I love this PII 920 and didn't spend nearly anything on it (~ $100) so I've lost nothing at all and will gain when/if I sell it anyway haha. I keep a keen eye on prices for stuff I've still got so that whenever I upgrade anything I never spend more than a few bucks to get it, my computers buy me new computers :cheers:

Kei

P.S.
I beg of you to leave that ridiculii (that's multiple ridiculous and I own the copyright to that word) ram in the other rig because my head couldn't take the beating.

I will try it out on my M3A79-T board first though, see what I can do

 

[Kei]

patriot extremes DDR800 CL5@2.2v


this style heatspreader

mine are some old ass sticks

That's exactly what my sticks look like except my came stock PC9200 1150Mhz CL5@ 2.3v

maybe I've got more than I thought I did
===================================================

CP again it's all your fault that I'm staring at an open box M3A79-T for $133 on newegg...or the GX version for $91 freakin dollars! You guys are so evil....

Kei

 

[Kei]

Okay I'm gonna stop looking for a second and play some Crackdown on xb360 with my brother

 

[cdawall]

That's exactly what my sticks look like except my came stock PC9200 1150Mhz CL5@ 2.3v

maybe I've got more than I thought I did
===================================================

CP again it's all your fault that I'm staring at an open box M3A79-T for $133 on newegg...or the GX version for $91 freakin dollars! You guys are so evil....

Kei

who knows but i don't think you can beat mine lol

oh well i'm thinking about hunting down some D9GMH on ebay just to kill it beating you

 

[Chicken Patty]

Kei it might be my fault, but whos fault is it that I got like this?


TPU!!!!! lol, man i've changed since I joined this thing, ive become a geek in all aspects lol. Sorry Kei, it all started in your Phenom Thread so you can't blame me neither, that was the first thread I was active on!!

 

[Kei]

Haha...then who do I blame because the Phenom thread was the reason I joined here.

I think I had maybe a handful of posts on the boards at that point and joined because I figured this would be a good place with level headed people to show what the Phenom was really all about. I'm DAMN glad I stayed though because it's awesome here!

I still blame you for making me want to buy that board...and more ram....and benchmark again.....heck and whatever else I can think of so I sleep better at night. Haha now you've even got me in a war with cdawall!

I imagine I will lose this one though since he's about to be rockin an ES chip and I'm sitting on the locked multi...cheater!


Kei <----is still thinking HARD about that damn board.

 

[cdawall]

if it makes you feel better i'm looking at 4GB of D9GMH

 

[Kei]

No it makes me feel worse, I've been on newegg for the past 30 minutes staring at ram trying to figure out what to do. I'm not sure if I should pick up some new ram or a new board yet. I DO however happen to spy an open box M3A79-T for $132 or even crazier a 790GX (ASUS of course) for a whopping $91........................

Kei