Phenom 9950 overclocking

[fullinfusion]

no problem bro.


Man I need a res and a pump to put the PH II under water. Temps are not too good already at 3.7ghz. need better cooling before I continue to play around with it.

Temps under water for me are a tad higher than id like...... mid 30's idle and upper 40's under load.... i have a fitting that need's to be grilled out on the rad, it's restricting the flow.
but so far so good

 

[Chicken Patty]

Temps under water for me are a tad higher than id like...... mid 30's idle and upper 40's under load.... i have a fitting that need's to be grilled out on the rad, it's restricting the flow.
but so far so good

brad, that little thermal take rad can only do so much bro.


Would you be interested in a Koolance 120.1. Same material as your TT rad and it cools better IMO. As far as price, you know what the price is

This is the rad :
http://www.koolance.com/water-cooling/product_info.php?product_id=759

 

[fullinfusion]

brad, that little thermal take rad can only do so much bro.


Would you be interested in a Koolance 120.1. Same material as your TT rad and it cools better IMO. As far as price, you know what the price is

This is the rad :
http://www.koolance.com/water-cooling/product_info.php?product_id=759

LOL....

 

[Chicken Patty]

LOL....

your choice of fittings.

Compression, barb, angled, straight, rotary, 3/8th, 1/2. You tell me.

 

[ChaoticAtmosphere]

LOL Bro!!!! nice Avatar

Hehehe...it was time for a change. Besides, hurricane season is soon upon CP...I don't want to rub it in .

I think Strongbad (the dude in my avvy) got the same BSOD as you!!

damn guys, from when I started this thread to now its been a long way. 85 pages

Im almost at 5k posts

Woooooo!!!!

 

[fullinfusion]

your choice of fittings.

Compression, barb, angled, straight, rotary, 3/8th, 1/2. You tell me.

Ah shit man..... i cant remember what i have...... its just the stock TT fittings with a couple Tractor Air break fittings i scooped from the shop at work?\
I think there 3/8's but not sure

 

[fullinfusion]

Hehehe...it was time for a change. Besides, hurricane season is soon upon CP...I don't want to rub it in .

I think Strongbad (the dude in my avvy) got the same BSOD as you!!



Woooooo!!!!

Oh dont say that Blair!!!!!

 

[ChaoticAtmosphere]

Oh dont say that Blair!!!!!

Well just don't go pouring ketchup on your computer.

 

[eidairaman1]

http://www.aumha.org/a/stop.php#0xd1

 

[ChaoticAtmosphere]

http://www.aumha.org/a/stop.php#0xd1

Nice 1 eidairaman1, Bookmarked.

 

[eidairaman1]

yup a good site to go to because MS tends to hide their KB stuff now.

 

[Chicken Patty]

Ah shit man..... i cant remember what i have...... its just the stock TT fittings with a couple Tractor Air break fittings i scooped from the shop at work?\
I think there 3/8's but not sure

you are using the tubing that came with the TT kit? If so that is 3/8th

 

[crtecha]

This is a nice little manually on phenom temps

http://www.amd.com/us-en/assets/con...d_tech_docs/GH_43375_10h_DT_PTDS_PUB_3.14.pdf

 

[ChaoticAtmosphere]

This is a nice little manually on phenom temps

http://www.amd.com/us-en/assets/con...d_tech_docs/GH_43375_10h_DT_PTDS_PUB_3.14.pdf

Yep...it's the same document that told me my version of the 9850BE's max temp was 61c. Thanks for posting it Crtecha. Bookmarked

 

[crtecha]

Yep...it's the same document that told me my version of the 9850BE's max temp was 61c. Thanks for posting it Crtecha. Bookmarked

No problem. I will be spending most of sunday OC'n so it was nice having that on hand and it has all the chips and revisions also which was informative.

 

[fullinfusion]

you are using the tubing that came with the TT kit? If so that is 3/8th

yes its 3/8.... the stock tubing

 

[Chicken Patty]

yes its 3/8.... the stock tubing

ill give you both fittings dude. just in case.

 

[fullinfusion]

ill give you both fittings dude. just in case.

Thanks Bro..... I cant wait to hook it up..... do you think i should hook the other rad up in the system in Series?

 

[Chicken Patty]

Thanks Bro..... I cant wait to hook it up..... do you think i should hook the other rad up in the system in Series?

naw bro, just try a single rad out, this rad is decent, i liked it a lot.

 

[ChaoticAtmosphere]

So Brad. How's that mini bar fridge/full tower coming along??? I wanna know if it gives you a BSOD if you put more than a 6 pack in it!!!


These guys are awesome!!!

Watch Chicken Patty get baked: A short film by Shadowfold!


I have come to the conclusion that Shadow has way tooo much time on his hands!!!!

 

[gstark45]

what heat sink do you use???

Trying to get a good idea of what heat sink everyone recommends for a 9950 (black box) on a M3A32-MVP deluxe board? Tried an Thermalright Ultra 120, but it was too tall. Any recommendations?

Thx.

 

[King_Jay16]

Trying to get a good idea of what heat sink everyone recommends for a 9950 (black box) on a M3A32-MVP deluxe board? Tried an Thermalright Ultra 120, but it was too tall. Any recommendations?

Thx.

My Zalman 9700Nt works great for me, keeps my temps real low plus i have a well ventilated case. an antec 300 hundred with 5 fans 3 120mm pushing 110cfm of air each, a 140mm and a 80mm fan as exhaust fans

 

[Chicken Patty]

sorry can't give any input here, I had mine water cooled

 

[Assassin48]

Trying to get a good idea of what heat sink everyone recommends for a 9950 (black box) on a M3A32-MVP deluxe board? Tried an Thermalright Ultra 120, but it was too tall. Any recommendations?

Thx.

I have a 9700NT for sale in my thread it was used for less then 4 hours then went to watercolling

$55 shipped

 

[Chicken Patty]

I have a 9700NT for sale in my thread it was used for less then 4 hours then went to watercolling

$55 shipped

great deal!