W
Wolf32
Guest
To view this case mod, go here.
Specs:
Intel Core i7 920 D0 @ 4 Ghz 1,24v
ASUS P6T Deluxe
3x2GB Corsair Dominator TR3X6G1600C8D @ 1600 Mhz 7-7-7-24-1T
Gainward GTX 295 Quad SLi
2 x WesternDigital VelociRaptor 150 GB (RAID 0)
PSU Cooler Master 1000W
Case Enermax Uber Chakra
Mods:
I've added many LED lights (blue and red) that can be turned on or off thanks to a switch put on the cover of a 5,25" bay. I've added 6 NEON lights (1 blue, 1 red, 4 green) controlled by another switch. The two 120mm FANs near the VGAs are controlled by two switches. I've cut and painted the plexiglass sidepanel. I've used only LED FANs.
Problems with the peltier cell and frequencies higher than 3,6 Ghz. Working on it. You can see the temperatures @ stock frequency in one of the last images. I've created a small unit (last image) thanks to a Micro-ATX case where is located the PSU for the peltier cell. There are also three switches to turn on/off the secondary PSU, the liquid cooling system and the peltier cell. Instructions and labels are in italian, my native language. Sorry about that!
They say that you've to turn off your computer, than the peltier cell, than after five mintues the liquid cooling system and at last the secondary PSU. This to prevent the CPU to get damaged.
Specs:
Intel Core i7 920 D0 @ 4 Ghz 1,24v
ASUS P6T Deluxe
3x2GB Corsair Dominator TR3X6G1600C8D @ 1600 Mhz 7-7-7-24-1T
Gainward GTX 295 Quad SLi
2 x WesternDigital VelociRaptor 150 GB (RAID 0)
PSU Cooler Master 1000W
Case Enermax Uber Chakra
Mods:
I've added many LED lights (blue and red) that can be turned on or off thanks to a switch put on the cover of a 5,25" bay. I've added 6 NEON lights (1 blue, 1 red, 4 green) controlled by another switch. The two 120mm FANs near the VGAs are controlled by two switches. I've cut and painted the plexiglass sidepanel. I've used only LED FANs.
Problems with the peltier cell and frequencies higher than 3,6 Ghz. Working on it. You can see the temperatures @ stock frequency in one of the last images. I've created a small unit (last image) thanks to a Micro-ATX case where is located the PSU for the peltier cell. There are also three switches to turn on/off the secondary PSU, the liquid cooling system and the peltier cell. Instructions and labels are in italian, my native language. Sorry about that!
They say that you've to turn off your computer, than the peltier cell, than after five mintues the liquid cooling system and at last the secondary PSU. This to prevent the CPU to get damaged.
Last edited by a moderator:
