• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

NZXT M59 Medium Tower PC Chassis Early Look

malware

New Member
Joined
Nov 7, 2004
Messages
5,422 (0.74/day)
Location
Bulgaria
Processor Intel Core 2 Quad Q6600 G0 VID: 1.2125
Motherboard GIGABYTE GA-P35-DS3P rev.2.0
Cooling Thermalright Ultra-120 eXtreme + Noctua NF-S12 Fan
Memory 4x1 GB PQI DDR2 PC2-6400
Video Card(s) Colorful iGame Radeon HD 4890 1 GB GDDR5
Storage 2x 500 GB Seagate Barracuda 7200.11 32 MB RAID0
Display(s) BenQ G2400W 24-inch WideScreen LCD
Case Cooler Master COSMOS RC-1000 (sold), Cooler Master HAF-932 (delivered)
Audio Device(s) Creative X-Fi XtremeMusic + Logitech Z-5500 Digital THX
Power Supply Chieftec CFT-1000G-DF 1kW
Software Laptop: Lenovo 3000 N200 C2DT2310/3GB/120GB/GF7300/15.4"/Razer
PC Games Hardware Online is again a step ahead of NZXT themselves, giving us an early look at their latest enclosure - the mid-tower M59 PC chassis. The new all-black case is big enough to fit four 5.25-inch drives, and up to five 3.5-inch hard disks, also the case comes with brackets that allow for up to two 2.5-inch solid-state drives to be installed inside. For adequate cooling NZXT provides two 120 mm fans installed on the side panel and on the back of the case. An additional two 140 mm fans can be installed on top of the case. Lastly, the case has pre-drilled holes that ease the installation of external water cooling radiators a lot. The case is expected to start selling later this month for just under 60 Euro.



View at TechPowerUp Main Site
 
Joined
May 12, 2009
Messages
5,202 (0.92/day)
System Name Dust Collector
Processor AMD Ryzen 5 3600X
Motherboard Asus B550I Aorus Pro WiFi AX
Cooling Alpenfohn Black Ridge V2 w/ Noctua NF-A9x14
Memory Corsair Vengeance LPX 16GB DDR4 3200MHz/CL16
Video Card(s) Power Color Red Dragon RX 5700 XT
Storage Samsung EVO+ 500GB NVMe
Display(s) Dell S2721DGF
Case Dan Case A4
Power Supply Corsair SF600 Platinum
Mouse Logitech G603
Keyboard Logitech G613
Joined
Feb 11, 2009
Messages
5,554 (0.96/day)
System Name Cyberline
Processor Intel Core i7 2600k -> 12600k
Motherboard Asus P8P67 LE Rev 3.0 -> Gigabyte Z690 Auros Elite DDR4
Cooling Tuniq Tower 120 -> Custom Watercoolingloop
Memory Corsair (4x2) 8gb 1600mhz -> Crucial (8x2) 16gb 3600mhz
Video Card(s) AMD RX480 -> RX7800XT
Storage Samsung 750 Evo 250gb SSD + WD 1tb x 2 + WD 2tb -> 2tb MVMe SSD
Display(s) Philips 32inch LPF5605H (television) -> Dell S3220DGF
Case antec 600 -> Thermaltake Tenor HTCP case
Audio Device(s) Focusrite 2i4 (USB)
Power Supply Seasonic 620watt 80+ Platinum
Mouse Elecom EX-G
Keyboard Rapoo V700
Software Windows 10 Pro 64bit
As long as it does NOT have Blue LED fans its awesome.
Something like white or purple or lime would be cool.
 

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,745 (3.30/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
I think it's hot... except for the case window (hate those). But that's just cosmetics... Bad internal case design... the HDD cage is potentially in the way of a serious business graphics card. That and I never liked the power supply being at the bottom.
 

Kitkat

New Member
Joined
May 14, 2009
Messages
768 (0.14/day)
i think it would vbe cool if the front was flat and the grill had slight waves the right side looks cool but make shte left side look so baron wish they just matched lol one side window one side grilltype
 
Joined
Sep 26, 2006
Messages
6,959 (1.05/day)
Location
Australia, Sydney
I think it's hot... except for the case window (hate those). But that's just cosmetics... Bad internal case design... the HDD cage is potentially in the way of a serious business graphics card. That and I never liked the power supply being at the bottom.

Why? A PSU at the bottom makes a sturdier and less top heavy case and thermally its much better for the system. Its probably OEM'ed by Coolermaster as usual for NZXT thus any GTX260/280/295/HD4870X2/etc will fit as it seems to be derived from the gladiator 600.

Heat rises ya know? so if your system runs toasty, the last place you want a PSU to be is at the top as it will be catching all the heat, and cycling it through the system. Some logic please? I know many of you think that the GPU's heat may damage your PSU, but that is just an assumption, an incorrect one when you consider how heat only travels upwards, unless blown downwards, but will still be displaced by the volume of heavier cool air from the intakes. For cabling's sake these days its pretty irrelevant because PSU manufacturers and motherboard manufacturers are moving the connectors to convenient locations for these modified ATX cases.
 

hat

Enthusiast
Joined
Nov 20, 2006
Messages
21,745 (3.30/day)
Location
Ohio
System Name Starlifter :: Dragonfly
Processor i7 2600k 4.4GHz :: i5 10400
Motherboard ASUS P8P67 Pro :: ASUS Prime H570-Plus
Cooling Cryorig M9 :: Stock
Memory 4x4GB DDR3 2133 :: 2x8GB DDR4 2400
Video Card(s) PNY GTX1070 :: Integrated UHD 630
Storage Crucial MX500 1TB, 2x1TB Seagate RAID 0 :: Mushkin Enhanced 60GB SSD, 3x4TB Seagate HDD RAID5
Display(s) Onn 165hz 1080p :: Acer 1080p
Case Antec SOHO 1030B :: Old White Full Tower
Audio Device(s) Creative X-Fi Titanium Fatal1ty Pro - Bose Companion 2 Series III :: None
Power Supply FSP Hydro GE 550w :: EVGA Supernova 550
Software Windows 10 Pro - Plex Server on Dragonfly
Benchmark Scores >9000
Why? A PSU at the bottom makes a sturdier and less top heavy case and thermally its much better for the system. Its probably OEM'ed by Coolermaster as usual for NZXT thus any GTX260/280/295/HD4870X2/etc will fit as it seems to be derived from the gladiator 600.

Heat rises ya know? so if your system runs toasty, the last place you want a PSU to be is at the top as it will be catching all the heat, and cycling it through the system. Some logic please? I know many of you think that the GPU's heat may damage your PSU, but that is just an assumption, an incorrect one when you consider how heat only travels upwards, unless blown downwards, but will still be displaced by the volume of heavier cool air from the intakes. For cabling's sake these days its pretty irrelevant because PSU manufacturers and motherboard manufacturers are moving the connectors to convenient locations for these modified ATX cases.

I just don't like it there.
 

h3llb3nd4

New Member
Joined
Feb 15, 2009
Messages
3,323 (0.58/day)
Location
Durban, South Africa
System Name My mobo is Laughing at me
Processor E7400
Motherboard P5KPL-E Bios flashed to 0601 (Piece of poo!!)
Cooling Thermalright Ultra 120a
Memory GENERIC 2 GB DDR2 800
Video Card(s) NONE!! Beat that!!
Storage 500GB SAMSUNG SATAII, 250GB SAMSUNG SATAII and o'l crappy 4gb maxtor
Display(s) ACER X223W Q
Case AEROCOOL ZERODEGREE (planning to mod)
Audio Device(s) REALTEK ONBOARD
Power Supply GIGABYTE 460W
Software Win 7 x86 build 7022
Benchmark Scores Super Pi 1m 17.000 :(
hmmm, what did they give to their design teams? marijuana?
 

Binge

Overclocking Surrealism
Joined
Sep 15, 2008
Messages
6,979 (1.18/day)
Location
PA, USA
System Name Molly
Processor i5 3570K
Motherboard Z77 ASRock
Cooling CooliT Eco
Memory 2x4GB Mushkin Redline Ridgebacks
Video Card(s) Gigabyte GTX 680
Case Coolermaster CM690 II Advanced
Power Supply Corsair HX-1000
NZXT. Enough said. Don't trust it.
 

alentor

New Member
Joined
May 15, 2009
Messages
21 (0.00/day)
Location
Israel
System Name Azgolagar V2
Processor AMD Phenom II X4 920 (3.72GHZ zalman CNPS10x)
Motherboard Gigabyte ga-ma790x-ud4p
Cooling Zalman CNPS 10x extreme
Memory 2x2GB OCZ Reaper HPC Edition DDR2 1066MHZ
Video Card(s) Gainward GTX570 Goes GLH edition
Storage WD C Black 640GBs, 2x WD C Green 1TB
Display(s) LG FLATRON W2261VP 1080P 21.1", FLATRON L1972H 19" 4:3
Case antec 900
Power Supply Thermaltake ToughPower W0116 750W
Software win 7 7601 64bits
well....is ugly
i found it cool, like its not flat like all the other case it got cool curves! so its not ugly its just different.
 
Joined
Feb 23, 2008
Messages
1,064 (0.17/day)
Location
Montreal
System Name Aryzen / Sairikiki / Tesseract
Processor 5800x / i7 920@3.73 / 5800x
Motherboard Steel Legend B450M / GB EX58-UDP4 / Steel Legend B550M
Cooling Mugen 5 / Pure Rock / Glacier One 240
Memory Corsair Something 16 / Corsair Something 12 / G.Skill 32
Video Card(s) AMD 6800XT / AMD 6750XT / Sapphire 7800XT
Storage Way too many drives...
Display(s) LG 332GP850-B / Sony w800b / Sony X90J
Case EVOLV X / Carbide 540 / Carbide 280x
Audio Device(s) SB ZxR + GSP 500 / board / Denon X1700h + ELAC Uni-Fi 2 + Senn 6XX
Power Supply Seasonic PRIME GX-750 / Corsair HX750 / Seasonic Focus PX-650
Mouse G700 / none / G602
Keyboard G910
Software w11 64
Benchmark Scores I don't play benchmarks...
So, those are pictures of a pre-production sample? It only has atx mounts and the clearance from the top fans to the motherboard doesn't seem quite enough.

Other than that, I kind of like it. It will sell quite well if they keep the price down.
 
Joined
Aug 10, 2007
Messages
2,149 (0.34/day)
Location
Austin TX
Processor i9 11900k
Motherboard Maximus XII Apex
Cooling Custom Liquid W/ 360x60 Radiator
Memory 32Gb Team XTREEM ARGB 3600 b-die
Video Card(s) Waterblocked MSI RTX 4070
Storage Intel 900p 480Gb + 4tb Intel 670p
Display(s) LG C2 evo 42"
Case Geometric Future Model 8
Audio Device(s) HD58X + Sennheiser GSX 1000
Power Supply Corsair RM 750x
Mouse Steelseries Aerox 5 wired
Keyboard Akko Mod 007b HE
VR HMD Samsung Odyssey+
Software Windows 11
the HDD cage is potentially in the way of a serious business graphics card.

if you have a serious long card more than likely its a high end card which your probably not doing sli or xfire on seeing as its already high end..... unless your mounting your gfx card at the bottom part of your mobo there wouldn't be any clearance issues at all, directly across from the top 3 expansion slots is the fdd cage which i'm sure you could gut out anyway if need be.
 
Joined
May 19, 2007
Messages
7,662 (1.20/day)
Location
c:\programs\kitteh.exe
Processor C2Q6600 @ 1.6 GHz
Motherboard Anus PQ5
Cooling ACFPro
Memory GEiL2 x 1 GB PC2 6400
Video Card(s) MSi 4830 (RIP)
Storage Seagate Barracuda 7200.10 320 GB Perpendicular Recording
Display(s) Dell 17'
Case El Cheepo
Audio Device(s) 7.1 Onboard
Power Supply Corsair TX750
Software MCE2K5
Top