well, I got some pics for you guys, but first the story of the day.
as some of you know, ive been dealing with instability issues with my i7 rig. First internet connectivity was intermitent, a reboot will fix it momentarily, then a few minutes after going into windows, BSOD "machine check exception" I loaded defaults blaming the overclock for this, today i'm jamming away and the sound cuts off, then a few seconds later, the same BSOD. Shit, i'm thinking my board is loosing it! I remove the sound card, BSOD right away. So I load defaults again, somewhere along the way I had loaded my overclocked settings. At defaults, its working fine, i'm using my on board.
After a few hours of putting my E7200 in the new case (Thermal Take Element S) i reboot my comp because i had tried the soundcard in the e7200 pc, and the card worked. I was going to give it another shot on the i7 rig. Well, the PC wouldn't boot, removed card, nothing. Removed video card and put the X300 from my other rig and it booted. So I was getting ready to call it quits and say my other 4870 had gone to shits, when I decided to try something. I cleaned all ati drivers with Driver Sweeper, popped in the 4870 and it booted. So, I installed new drivers, put in the sound card, gave it fresh drivers too, and now here I am better than ever. Back to my overclocked crunching settings and all
. So enough of this boring story, here are the pics of the E7200 rig for now on air, once I get a few spare pennies, i'll do the project log and watercool it
Sorry I didn't take more pics, camera was running out of battery and I don't have the charger, it's at the owners house
The Case:
The Inside:
Finished:
This board however is anti cable management because of the location of the 24pin. Impossible to hide if you ask me. Does anybody have any suggestions for that?
...and for your own viewing pleasure, these are the settings i'm crunching on the i7 rig now, for those interested in knowing: