Changis
New Member
- Joined
- Jun 21, 2006
- Messages
- 314 (0.05/day)
- Location
- Norwegia
| Processor | AMD Opteron 165 (ccbbe) @ 3000 (CPU-Z ID: 125237 ) |
|---|---|
| Motherboard | Sapphrie A9RD580 (the White One) (with leaked ATI manta ref, board Bios) |
| Cooling | Cpu: Corsair Nautilus 500 Watercooling Northbridge: T/T spirit II 2 80mm fans 1for HDD one for door |
| Memory | 2x512 Kingston Hyper-x 3500 ddr434 2-2-2-5-1T |
| Video Card(s) | Sapphire X1900XT 256MB |
| Storage | Main: Samsung SP. 160G SataII Storage: 2x WD 320 |
| Display(s) | Fujitsu e212 / Daewoo 28" widescreen / dad's 42" HD-TV (when they are away;) or 1 of my 2 projektors |
| Case | Custom Glow-in-the-dark painted PC Case! PM ME IF YOU KNOW ANY1 WITH THE SAME |
| Audio Device(s) | onboard |
| Power Supply | Mist 600W 4x12V@20A |
| Software | Xp Pro |
To view this case mod, go here.
Specs:
Sapphire A9RD580 - Opty 165 @ 3ghz cooled by Nautilus 500 - 2 x 512mb Ram - 2 x X1950xt
Mods:
Custom Lumilight Paint job. (offshore standard) This pc Glows a eerie green after all lights are off. painted on the outside and inside. Removed Plastic cover from original case, cut a big opening in the door, and slapped on a custom cut acrylic window with GLOW etched into the bottom left corner, "watercooling" etched right above where the tubes exit the case, and "aircooling" above the fan on the door. 2 x 30cm UV cold kathode
The "Night shots" have horrible cable management
but as you can see in the "Day shots" the cables has been managed as good as i could, since this case doesnt have more than aproc 1.5-2cm gap to "Crunch" the cables into (but you can clearly see the motherboard (just not the 2-3cm at the end
))
the also does not show how much it actually glows. Real Nightshots coming soon.
Specs:
Sapphire A9RD580 - Opty 165 @ 3ghz cooled by Nautilus 500 - 2 x 512mb Ram - 2 x X1950xt
Mods:
Custom Lumilight Paint job. (offshore standard) This pc Glows a eerie green after all lights are off. painted on the outside and inside. Removed Plastic cover from original case, cut a big opening in the door, and slapped on a custom cut acrylic window with GLOW etched into the bottom left corner, "watercooling" etched right above where the tubes exit the case, and "aircooling" above the fan on the door. 2 x 30cm UV cold kathode
The "Night shots" have horrible cable management
but as you can see in the "Day shots" the cables has been managed as good as i could, since this case doesnt have more than aproc 1.5-2cm gap to "Crunch" the cables into (but you can clearly see the motherboard (just not the 2-3cm at the end
))the also does not show how much it actually glows. Real Nightshots coming soon.
Last edited by a moderator:
