4ghz Club

[sinar]

0944FPMW
ACC disabled
Vcore @ 1.675 in bios
-9C idle cpu temp. in bios
Single stage cooling

 

[Chicken Patty]

that's some great clocking there Sinar what was the load temp?

 

[Velvet Wafer]

0944FPMW
ACC disabled
Vcore @ 1.675 in bios
-9C idle cpu temp. in bios
Single stage cooling

http://img33.imageshack.us/img33/5729/screenshot485s.jpg

if you keep up like this, i believe, AMD will contact you someday

 

[sinar]

if you keep up like this, i believe, AMD will contact you someday

Thanks Velvet......6 cores cpu from AMD will be nice

With this old single stage cooling, 4.9Ghz benches only for super pi 1m and other short benches only. It can't stand the load fo longer benches like 3D '06

 

[Velvet Wafer]

Thanks Velvet......6 cores cpu from AMD will be nice

With this old single stage cooling, 4.9Ghz benches only for super pi 1m and other short benches only. It can't stand the load fo longer benches like 3D '06

seems,that you need to learn, how to build a dual stage
come, sinar! 5ghz! more! you want it too!

 

[sinar]

5Ghz

0944FPMW @ -9C core temp
Boot up @ 4.54Ghz
Vcore @ 1.65V, but cpu power monitor in bios shows 1.74V..Typical M4A79T Del mobo problem with overvoltage

 

[3dsage]

0944FPMW @ -9C core temp
Boot up @ 4.54Ghz
Vcore @ 1.65V, but cpu power monitor in bios shows 1.74V..Typical M4A79T Del mobo problem with overvoltage

http://img30.imageshack.us/img30/2886/screenshot486ri.jpg

http://img710.imageshack.us/img710/4180/screenshot488.jpg

CONGRATS!!! You got the Top Spot man
4.9998 GHZ Right on the money.
Its gonna be hard to pass you up man

 

[Velvet Wafer]

0944FPMW @ -9C core temp
Boot up @ 4.54Ghz
Vcore @ 1.65V, but cpu power monitor in bios shows 1.74V..Typical M4A79T Del mobo problem with overvoltage

http://img30.imageshack.us/img30/2886/screenshot486ri.jpg

http://img710.imageshack.us/img710/4180/screenshot488.jpg

devastating!
now if that would be stable, and capable of running 24/7
deadly performance!

Nice TPU record! ;-)

 

[sinar]

Thanks 3Ds and Velvet. Its an honor for me to be here at TPU

Its only for short benches with this old single stage vapor cooling, but it was fun.....No more worries with cold bug @ <1C core temp.

I have to go dice or ln2 for 3Ds or spi 32m benches @ >5Ghz

 

[3dsage]

Thanks 3Ds and Velvet. Its an honor for me to be here at TPU

Its only for short benches with this old single stage vapor cooling, but it was fun.....No more worries with cold bug @ <1C core temp.

I have to go dice or ln2 for 3Ds or spi 32m benches @ >5Ghz

Its awesome to have some Extreme Overclockers on here

 

[Cold Storm]

Nice runs Sinar!

3d.. I be on air for the 4.6ghz stuff.. No water on this baby.

 

[Rev_Pizzaguy]

E5200 @ 4.164

Here ya go! This get me on the board?

 

[overclocking101]

WOW! nice guys! i need a quad core badly! I have an i7 P55 system sitting here begging me to push it but its for reviewing so i cant break it ah well soon ill have another here to play with

 

[p_o_s_pc]

can't wait to drop this X2 240 on a 790gx board(on a Nforce 430 ATM) I already had it to 3.9ghz i'm sure i can pull the extra 100mhz out of it

 

[3dsage]

WOW! nice guys! i need a quad core badly! I have an i7 P55 system sitting here begging me to push it but its for reviewing so i cant break it ah well soon ill have another here to play with

Awaiting results, BTW I pm'ed you back.

can't wait to drop this X2 240 on a 790gx board(on a Nforce 430 ATM) I already had it to 3.9ghz i'm sure i can pull the extra 100mhz out of it

You will definately be able to break the 4GHZ mark, that nforce is holding you back.
Plus you have a E7200 coming your way, thats an easy 4GHZ.

Here ya go! This get me on the board?

http://forums.techpowerup.com/attachment.php?attachmentid=31496&stc=1&d=1261159781

Looks like you got a healthy "M0".

Heres my go, with this E5300 "R0", I was trying to prime blend, but would fail after 40mins But temps where great 58C-60C.
thats why Voltage is kinda high.

 

[customfab87]

Nothing special, but it's my first time reaching 4GHz so I thought I'd share. I'm using a E5300 on an ASRock P43Twins1600. There seems to be quite a bit of VDroop under Prime95... possibly due to the cheapness of the board? I did have a question though. My motherboard only has Low, Medium, High, and Very high settings for VTT, NB, and PLL voltages, so I'm not sure what they come out to exactly. Does anyone have any suggestions? Also is 0.63 GTLRef good? Thanks.

Steven

 

[3dsage]

Try going into your bios to see whats going on, you can also give Everest a shot. It might show the actual voltages.

Thats would be some crazy V-Drop 1.419 to 1.368, try finding LLC(load line calibration) and enable it in your bios.

Other than that nice overclock.

As for GTL settings, I usually set it to .67. Also PLL doesnt have to be high, so set to low or medium see if it makes a difference in stability when priming.

 

[Rev_Pizzaguy]

I think I might try to make a run up to 4.2GHz this week. I'll be posting some more screenies!

 

[FilipM]

New PB - bested previous one by 9MHz !!!!!!!!!


FilipM | E8400 C0 | 4302MHz | Coolermaster Hyper TX2

 

[p_o_s_pc]

now that i got the 790gx board its time for me to learn to OC again as this bios is way different then anything i have seen before and i'm still learning how to OC the Athlon II but on the bright side i'm about 90% sure i can get in here now. If i can't with the X2 240 i have a E7200 I can try and i could switch CPUs and take my E1500 out of the shitty ECS and put it in the P35 I want in here with something other then a lame P4

EDIT3d you said it was nice to see me with an Intel chip. Now i got 3 of them and 3 AMDs
I have E7200
E1500
P4HT 661

 

[p_o_s_pc]

here you go as promised 4ghz with AMD Athlon II X2 240
p_o_s_pc | Athlon X2 240 | 4.004 | Xiggy S1283

http://valid.canardpc.com/show_oc.php?id=903931

 

[3volvedcombat]

3volvedcombat||q9550||4.655*48Ghz||Corsair H50 P&P

 

[Velvet Wafer]

here you go as promised 4ghz with AMD Athlon II X2 240
http://i166.photobucket.com/albums/u88/p_o_s_pc/4ghz.png
http://valid.canardpc.com/show_oc.php?id=903931

congratulations on your first 4 ghz valid with a "new" chip! i guess it wont be the last!

 

[p_o_s_pc]

congratulations on your first 4 ghz valid with a "new" chip! i guess it wont be the last!

thanks i don't plan to mess with it alot more but there maybe another from this chip next time i get in the mood for some OCing and possibly the smell of burnt hardware...

Bad news i can't run SLI on this 790GX it won't see both card no matter what i do so it looks like the GTX260 will go in there and split the GTs up between 2 of the crunchers

 

[Velvet Wafer]

thanks i don't plan to mess with it alot more but there maybe another from this chip next time i get in the mood for some OCing and possibly the smell of burnt hardware...

Bad news i can't run SLI on this 790GX it won't see both card no matter what i do so it looks like the GTX260 will go in there and split the GTs up between 2 of the crunchers

so ASRock is surely worser than Biostar
asus debinned stuff lands there i believe. useable. but not high end
the gtx260 will have more power than 2 8800gt i believe, or at least nearly as much. if they only fold, it doesnt matter,eh?