4ghz Club

[3volvedcombat]

Thats why i baught a GTX 260, from a 8800gt. Litteraly Twice the bit wide buss, shaders, and everything else, but now i got a second GTX 260 sli'ing on my p45 on 190.62 drivers. So i have quad 8800gt sli 9800gx2 quad sli

 

[Sasqui]

CPUz question...

When I go to submit the validation, I get explorer with the following message:

"This ID is valid, but not published"

I get that if I check the "publish online" (or not)

 

[p_o_s_pc]

so ASRock is surely worser than Biostar
asus debinned stuff lands there i believe. useable. but not high end
the gtx260 will have more power than 2 8800gt i believe, or at least nearly as much. if they only fold, it doesnt matter,eh?

yes it sucks worse then the Biostar when it comes to SLI. Something i don't like it overvolts while the Biostar under volted and the volts bounce all over the place. But the bus speed does get up there alot better then he biostar and the Bios has more options. Not sure if i will stick with this as my main rig or buy a new board and use the Asrock as a cruncher.. But its a free board and alot better then the Nforce. I don't want to sound ungrateful or anything.
And all of the cards fold so it doesn't matter much. The only reason i am putting the GTX260 in my main rig is so when i game i can have the best performance and i think the GTs will give better PPD in a dedicated folder/cruncher rig

 

[Sasqui]

Sasqui | E8600 | 4.900 | H2O

4.9Ghz...

http://valid.canardpc.com/show_oc.php?id=904069

 

[Sasqui]

Sasqui | E8600 | 4.950 | H20

http://valid.canardpc.com/show_oc.php?id=904069

 

[Sasqui]

Sasqui | E8600 | 4.990 | H2O

http://valid.canardpc.com/show_oc.php?id=904069

 

[Sasqui]

5Ghz Club?

Sasqui | E8600 | 5.000 | H2O

http://valid.canardpc.com/show_oc.php?id=904069

 

[3volvedcombat]

Sasqui | E8600 | 5.000 | H2O

http://img.techpowerup.org/091224/5GHZ.png

http://valid.canardpc.com/show_oc.php?id=904069

Nice FSB there, i wouldnt ask you to put 1.5+ volts but hey maybe 5.2-5.8Ghz is possible T_T

 

[Sasqui]

Nice FSB there, i wouldnt ask you to put 1.5+ volts but hey maybe 5.2-5.8Ghz is possible T_T

Based on the scaling I've seen, my gut tells I could do 5.2. I need to settle down before I try.

Totally stable at 4.7Ghz 1.32v - haven't done any stability tests above that.

 

[3volvedcombat]

Based on the scaling I've seen, my gut tells I could do 5.2. I need to settle down before I try.

Totally stable at 4.7Ghz 1.32v - haven't done any stability tests above that.

holy crap your completely stabel at 4.7ghz at only 1.32 volts WOW.
I NEED A E8600 TO PLAY WITH >.>

 

[Rev_Pizzaguy]

4.25GHz!

Okay, so here's my last run to 4.25GHz on M0 E5200:

 

[3dsage]

Good stuff guys.

@POS, you have a solid setup man. Clock that thing up to 4.2GHZ
BTW Whats the highest you can bench that chip?

Sasqui | E8600 | 5.000 | H2O

http://img.techpowerup.org/091224/5GHZ.png

http://valid.canardpc.com/show_oc.php?id=904069

Hey your tied up with SV for the top spot @ 4.990 GHZ, see if you can squeeze out a hertz or two

 

[p_o_s_pc]

Good stuff guys.

@POS, you have a solid setup man. Clock that thing up to 4.2GHZ
BTW Whats the highest you can bench that chip?

I may mess around with it alittle later i haven't tried to bench it much yet. The highest i have benched was 3.9ghz@1.52v and that was on the Gigabyte Nforce board so i'm sure 4-4.1ghz would be benchable on the Asrock 790GX.
Also i am going to try and get the E7200 to 4ghz(this chip isn't wanting to work with me)

 

[Sasqui]

Good stuff guys.

@POS, you have a solid setup man. Clock that thing up to 4.2GHZ
BTW Whats the highest you can bench that chip?




Hey your tied up with SV for the top spot @ 4.990 GHZ, see if you can squeeze out a hertz or two

You are KILLING me! Is 5Ghz "out of range"?!?!?!?!

 

[fatguy1992]

I can't post any of my OC's as they are all above 5GHz

BTW 4GHz is a baby OC on pretty much any CPU these days.

 

[Sasqui]

I can't post any of my OC's as they are all above 5GHz

BTW 4GHz is a baby OC on pretty much any CPU these days.

Please do post yours... you are officially called on the carpet after trashing everyone in this thread.

 

[fatguy1992]

Alright heres some...

Celeron 360 @ 6.066GHz

http://valid.canardpc.com/show_oc.php?id=731041

E5200 @ 5.187GHz

http://valid.canardpc.com/show_oc.php?id=558963

E7400 @ 5.2GHz

http://valid.canardpc.com/show_oc.php?id=840968

Q6600 @ 4.976GHz (will get 5GHz next time).

http://valid.canardpc.com/show_oc.php?id=617346

i7 920 D0

I was trying to trash anyone, I was only say to get a 4GHz CPU Z SS isn't hard even on stock cooling...

 

[Velvet Wafer]

EDIT: youre just a lucker, everyone can cherry pick, if he/she has enough "liquidity"

 

[Sasqui]

Alright heres some...

Celeron 360 @ 6.066GHz

http://valid.canardpc.com/show_oc.php?id=731041

E5200 @ 5.187GHz

http://valid.canardpc.com/show_oc.php?id=558963

E7400 @ 5.2GHz

http://valid.canardpc.com/show_oc.php?id=840968

Q6600 @ 4.976GHz (will get 5GHz next time).

http://valid.canardpc.com/show_oc.php?id=617346

i7 920 D0

http://img22.imageshack.us/img22/8158/3d062xgtx275.png

http://img27.imageshack.us/img27/1858/20091208050106.png

I was trying to trash anyone, I was only say to get a 4GHz CPU Z SS isn't hard even on stock cooling...

Wow, eating crow right here!

What the fuck are you using for cooliing?

 

[Velvet Wafer]

maybe a chiller on a cluster-loop

 

[Sasqui]

maybe a chiller on a cluster-loop

Cluster what?

The words that come to mind here are cascade or liquid nitrogen...

 

[Velvet Wafer]

Cluster what?

The words that come to mind here are cascade or liquid nitrogen...

chill the whole content of a bucket. then split as much pumps from it, as you got rigs

 

[fatguy1992]

My cooling for E52, E74 and Celeron were all single stage phase change. The Q66 and i7 920 D0 were done on dual stage cascade.

FYI i'm not rich, I am 17 years old, just finished school, work part time. I just save my money, I don't waste it on stuff I don't need for want (eg food and things that are used once and its all over).

These CPUs were not cherry picked, they are normal retail CPUs, I was very lucky with the Q6600.

 

[Velvet Wafer]

My cooling for E52, E74 and Celeron were all single stage phase change. The Q66 and i7 920 D0 were done on dual stage cascade.

FYI i'm not rich, I am 17 years old, just finished school, work part time. I just save my money, I don't waste it on stuff I don't need for want (eg food and things that are used once and its all over).

These CPUs were not cherry picked, they are normal retail CPUs, I was very lucky with the Q6600.

dual stage cascade is cheap, alright, i must be dumb. i hope you dont eat your chocolate only gold plated

i do exactly like you, but you must be very well paid, to own that much... i know how much money you must have paid, if you got all that stuff "legal"

one crappy, low watt,single stage phase is even too expensive for my purse
i actually have to save money, for even buying me an x2 240

 

[Sasqui]

My cooling for E52, E74 and Celeron were all single stage phase change. The Q66 and i7 920 D0 were done on dual stage cascade.

FYI i'm not rich, I am 17 years old, just finished school, work part time. I just save my money, I don't waste it on stuff I don't need for want (eg food and things that are used once and its all over).

These CPUs were not cherry picked, they are normal retail CPUs, I was very lucky with the Q6600.

Kudos, dude. I have yet to meet anyone with even a single stage phase change PC (that I know of!).

At 17, you should look into the great wide world of energy jobs if you haven't already. My plumber has installed two Acadia heat pumps in the Northeast US here - a dual-path cascade system that uses considerably less BTU equivalents than oil heat and heats a house comfortably, even down to -30f outside air!