• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

X-Fi functionality on any Realtek HDA Codec

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
Damn crappy ALC1200, can anyone tell me then where I could source a M-Audio Audiophile 192 in Australia? Thought these drivers could breath some new life into this Chip, but obviously not, all I want it for is 2-channel reproduction of music in exclusive mode through my XMPlay with WASAPI Plugin, any ideas? *Looks towards the old eMac sitting beside me* lol KK, from 2.35, to 2.21 X-Fi, now going to 2.45, all I have noticed going to the X-Fi one, is there is less pronounced bass, and a slight bit more high end. Been happy enough with stock drivers, think I'll just stick to updating them, unless an updated modded driver ever comes out then I'll give it a go, until then, I will be trying to source my M-Audio card for my shiny new amp :)
 
Last edited:
Joined
Mar 13, 2007
Messages
856 (0.13/day)
Location
Eastern Tennessee
System Name Firebird
Processor Ryzen 7 1700X
Motherboard MSI X370 Titanium
Cooling Tt Water2.0 PRO (They use the same bracket as 3.0)
Memory G.Skill TridentZ 2x8GB 3200 15-15-15-35 B-Die (@3333 ATM)
Video Card(s) ASUS STRIX R9 390 8GB
Storage Too many. Samsung 750GB, 120GB 850 EVO, Seagate 1TB, Toshiba 1TB, OCZ 32GB Cache Drive
Display(s) Samsung 46" UN46D6050 1080P HDTV
Case Home-made tech bench.
Audio Device(s) ASUS Xonar Essence STX (I use HDMI though *cry*)
Power Supply CWT PUC1000V-S 1000W, Abee Supremer (import) 1200W currently used as primary.
Mouse Razer Copperhead (circa 2005)
Keyboard Tt Challenger Pro (AVOID! Keys wear super fast)
Software Win 10 Pro x64
Benchmark Scores Meh.
So long story short, Ditch these drivers and DL the latest?

Unless you're running XP and can use the Crystalizer software, there isn't a whole lot of reasons for running it in Vista/7 since they are really outdated drivers.



BTW BeepBeep, I just noticed what you were referring to when you said you didn't think the 1200 was much like the 892A, it was from what I said. I did't quite mean it that way in terms of specs or sound, but more having to do with it being something like a proprietary (see: custom) chip and not listed on Realtek's site for info or specs about it.
 
Joined
Mar 28, 2010
Messages
241 (0.04/day)
Location
Ohio, USA
System Name The Black Mamba
Processor AMD FX-8150 @ 4.8 GHz + 2.5 GHz CPUNB
Motherboard ASUS Crosshair V Formula
Cooling Custom water, HeatKiller 3.0 LT, Swiftech MCR320, 3 GentleTyphoon 1850 RPM, OCZ HydroPulse 800
Memory Super Talent 2000 CAS 7 @ 2100 7-7-7-21 1.70v / GSKill Pi 2133 CAS 7 @ 2250 7-10-7-27
Video Card(s) 2x Sapphire Vapor-X HD5770's @ stock
Storage 2x 640GB Caviar Black in RAID 0
Display(s) 22" ASUS something + 20" Sceptre something
Case Lian-Li "Lancool" PC-K62
Power Supply XFX Black Edition 850w 80 Plus Silver
Software Windows 7 Pro
Benchmark Scores Too many to list ;D
Unless you're running XP and can use the Crystalizer software, there isn't a whole lot of reasons for running it in Vista/7 since they are really outdated drivers.



BTW BeepBeep, I just noticed what you were referring to when you said you didn't think the 1200 was much like the 892A, it was from what I said. I did't quite mean it that way in terms of specs or sound, but more having to do with it being something like a proprietary (see: custom) chip and not listed on Realtek's site for info or specs about it.

I think Realtek just won't update their website. ALC899A is also out. :shadedshu

Damn crappy ALC1200, can anyone tell me then where I could source a M-Audio Audiophile 192 in Australia? Thought these drivers could breath some new life into this Chip, but obviously not, all I want it for is 2-channel reproduction of music in exclusive mode through my XMPlay with WASAPI Plugin, any ideas? *Looks towards the old eMac sitting beside me* lol KK, from 2.35, to 2.21 X-Fi, now going to 2.45, all I have noticed going to the X-Fi one, is there is less pronounced bass, and a slight bit more high end. Been happy enough with stock drivers, think I'll just stick to updating them, unless an updated modded driver ever comes out then I'll give it a go, until then, I will be trying to source my M-Audio card for my shiny new amp :)

Can you possibly work around this: http://www.frozencpu.com/products/6...relude_71_Sound_Card.html?tl=g4c345s498#blank ?

I know you were looking for the M-Audio but FrozenCPU ships worldwide...
 
Last edited:
Joined
Mar 13, 2007
Messages
856 (0.13/day)
Location
Eastern Tennessee
System Name Firebird
Processor Ryzen 7 1700X
Motherboard MSI X370 Titanium
Cooling Tt Water2.0 PRO (They use the same bracket as 3.0)
Memory G.Skill TridentZ 2x8GB 3200 15-15-15-35 B-Die (@3333 ATM)
Video Card(s) ASUS STRIX R9 390 8GB
Storage Too many. Samsung 750GB, 120GB 850 EVO, Seagate 1TB, Toshiba 1TB, OCZ 32GB Cache Drive
Display(s) Samsung 46" UN46D6050 1080P HDTV
Case Home-made tech bench.
Audio Device(s) ASUS Xonar Essence STX (I use HDMI though *cry*)
Power Supply CWT PUC1000V-S 1000W, Abee Supremer (import) 1200W currently used as primary.
Mouse Razer Copperhead (circa 2005)
Keyboard Tt Challenger Pro (AVOID! Keys wear super fast)
Software Win 10 Pro x64
Benchmark Scores Meh.
I think Realtek just won't update their website. ALC899A is also out. :shadedshu

LOL You probably hit the nail on the head there! That one pic I linked, there was another dead link for I'm pretty sure the same image and the .jpg's file name was the date... It was early 2008 >_> I mean either it's what that one site I linked to had mentioned, it's because the company they are making them for don't want the specs released, or because the difference between all the chips is either minimal or just some refinements internal for better sound quality.
 
Joined
Mar 28, 2010
Messages
241 (0.04/day)
Location
Ohio, USA
System Name The Black Mamba
Processor AMD FX-8150 @ 4.8 GHz + 2.5 GHz CPUNB
Motherboard ASUS Crosshair V Formula
Cooling Custom water, HeatKiller 3.0 LT, Swiftech MCR320, 3 GentleTyphoon 1850 RPM, OCZ HydroPulse 800
Memory Super Talent 2000 CAS 7 @ 2100 7-7-7-21 1.70v / GSKill Pi 2133 CAS 7 @ 2250 7-10-7-27
Video Card(s) 2x Sapphire Vapor-X HD5770's @ stock
Storage 2x 640GB Caviar Black in RAID 0
Display(s) 22" ASUS something + 20" Sceptre something
Case Lian-Li "Lancool" PC-K62
Power Supply XFX Black Edition 850w 80 Plus Silver
Software Windows 7 Pro
Benchmark Scores Too many to list ;D
LOL You probably hit the nail on the head there! That one pic I linked, there was another dead link for I'm pretty sure the same image and the .jpg's file name was the date... It was early 2008 >_> I mean either it's what that one site I linked to had mentioned, it's because the company they are making them for don't want the specs released, or because the difference between all the chips is either minimal or just some refinements internal for better sound quality.

Well the bad thing about onboard audio codecs is really EMI from the CPU and motherboard itself. Most of the time when people say it's "crap" it's usually because the board engineers can't design a PCB to save their life.

My old EVGA/Foxconn board had ALC882 on it, and it sounded really, really poor.

My Gigabyte "Ultra Durable 3" board with not-so-superior-than-882-889A sounded years ahead.

Same goes for 892A on my second Gigabyte board. :rolleyes:
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
Hmm in theory would enabling the Spread Spectrum options in the BIOS do anything to improve audio quality or am I completely on the wrong track? And/or if so, would it kill my overclocking chances? Cheers BeepBeep but I found me a good source for the M-Audio card at http://www.jrrshop.com/catalog/product_info.php?currency=AUD&products_id=4893 for an absolute bargain who also ship worldwide and with the exchange rate it's a steal :)
 
Last edited:
Joined
Mar 13, 2007
Messages
856 (0.13/day)
Location
Eastern Tennessee
System Name Firebird
Processor Ryzen 7 1700X
Motherboard MSI X370 Titanium
Cooling Tt Water2.0 PRO (They use the same bracket as 3.0)
Memory G.Skill TridentZ 2x8GB 3200 15-15-15-35 B-Die (@3333 ATM)
Video Card(s) ASUS STRIX R9 390 8GB
Storage Too many. Samsung 750GB, 120GB 850 EVO, Seagate 1TB, Toshiba 1TB, OCZ 32GB Cache Drive
Display(s) Samsung 46" UN46D6050 1080P HDTV
Case Home-made tech bench.
Audio Device(s) ASUS Xonar Essence STX (I use HDMI though *cry*)
Power Supply CWT PUC1000V-S 1000W, Abee Supremer (import) 1200W currently used as primary.
Mouse Razer Copperhead (circa 2005)
Keyboard Tt Challenger Pro (AVOID! Keys wear super fast)
Software Win 10 Pro x64
Benchmark Scores Meh.
Well the bad thing about onboard audio codecs is really EMI from the CPU and motherboard itself. Most of the time when people say it's "crap" it's usually because the board engineers can't design a PCB to save their life.

My old EVGA/Foxconn board had ALC882 on it, and it sounded really, really poor.

My Gigabyte "Ultra Durable 3" board with not-so-superior-than-882-889A sounded years ahead.

Same goes for 892A on my second Gigabyte board. :rolleyes:

haha And this one site I read a review on said that Gigabyte can't design a board for shite when it comes to placing the audio chip and routing thick power traces near it. Don't get me wrong, I love Gigabyte and am on my third board in a row, just relaying that haha Another "trick" apparently is just slapping a small heatsink on the audio chip. Makes sense since Creative does that too, and while it may get warm, I don't think it would get warm enough to merit the use of a heatsink ya know? :p If a Voodoo3 Velocity 100 could go bare-back, I think an X-Fi could :laugh:



Hmm in theory would enabling the Spread Spectrum options in the BIOS do anything to improve audio quality or am I completely on the wrong track? And/or if so, would it kill my overclocking chances?

Don't know, it might but I have a feeling no. It is more for system stability.
 

Mussels

Freshwater Moderator
Joined
Oct 6, 2004
Messages
58,413 (7.92/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
spread spectrum reduces interefernce, so it may cut out some background noise in cheap onboards - you know, the shit you hear when moving a mouse around, that stuff.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Well the bad thing about onboard audio codecs is really EMI from the CPU and motherboard itself. Most of the time when people say it's "crap" it's usually because the board engineers can't design a PCB to save their life.

My old EVGA/Foxconn board had ALC882 on it, and it sounded really, really poor.

My Gigabyte "Ultra Durable 3" board with not-so-superior-than-882-889A sounded years ahead.

Same goes for 892A on my second Gigabyte board. :rolleyes:

Use a decent, dedicated sound card, even a lowly Audigy 2ZS, and you'll see that ALL on-board is crap compared to half-way decent sound cards.
 
Joined
Mar 13, 2007
Messages
856 (0.13/day)
Location
Eastern Tennessee
System Name Firebird
Processor Ryzen 7 1700X
Motherboard MSI X370 Titanium
Cooling Tt Water2.0 PRO (They use the same bracket as 3.0)
Memory G.Skill TridentZ 2x8GB 3200 15-15-15-35 B-Die (@3333 ATM)
Video Card(s) ASUS STRIX R9 390 8GB
Storage Too many. Samsung 750GB, 120GB 850 EVO, Seagate 1TB, Toshiba 1TB, OCZ 32GB Cache Drive
Display(s) Samsung 46" UN46D6050 1080P HDTV
Case Home-made tech bench.
Audio Device(s) ASUS Xonar Essence STX (I use HDMI though *cry*)
Power Supply CWT PUC1000V-S 1000W, Abee Supremer (import) 1200W currently used as primary.
Mouse Razer Copperhead (circa 2005)
Keyboard Tt Challenger Pro (AVOID! Keys wear super fast)
Software Win 10 Pro x64
Benchmark Scores Meh.
Use a decent, dedicated sound card, even a lowly Audigy 2ZS, and you'll see that ALL on-board is crap compared to half-way decent sound cards.

I'd like to, but I went over budget on my system by a large margin lol Had I not the need for a PSU (even though I was able to get lucky in finding a few good ones) and then the 890GPA was $40 more than I wanted to spend, I would've had my system going long ago heh I am happy though since the 890GX will allow me lllots of upgrade room! Not going to be stuck like I was with my S939 since it went EOL a few months later :\

The only time I hear what Mussles said, was if I have my Shure earbuds in. That is using my ooold Gigabyte S939 with a non-HD Realtek 850 AC'97 chip. When it was my Z-560s plugged in, there was no sound coming through. I was pretty pleased with how it sounded, and can only wait to hear how the 892A sounds!

If I ever do break down and get a dedicated sound card again, it'll be a XONAR :) The one review I read which had lower end X-Fi card and XONAR, with a ALC889 tossed in, the 889 did VERY well compared to the X-Fi. The XONAR just did better in 98% of the tests is all heh Plus, Ket has convinced me to steer clear of Creative due to shite drivers, and recommends the XONAR as well :rockout:
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
I'd like to, but I went over budget on my system by a large margin lol Had I not the need for a PSU (even though I was able to get lucky in finding a few good ones) and then the 890GPA was $40 more than I wanted to spend, I would've had my system going long ago heh I am happy though since the 890GX will allow me lllots of upgrade room! Not going to be stuck like I was with my S939 since it went EOL a few months later :\

The only time I hear what Mussles said, was if I have my Shure earbuds in. That is using my ooold Gigabyte S939 with a non-HD Realtek 850 AC'97 chip. When it was my Z-560s plugged in, there was no sound coming through. I was pretty pleased with how it sounded, and can only wait to hear how the 892A sounds!

If I ever do break down and get a dedicated sound card again, it'll be a XONAR :) The one review I read which had lower end X-Fi card and XONAR, with a ALC889 tossed in, the 889 did VERY well compared to the X-Fi. The XONAR just did better in 98% of the tests is all heh Plus, Ket has convinced me to steer clear of Creative due to shite drivers, and recommends the XONAR as well :rockout:

Ket is not exactly an expert in audio. Hell, he doesn't even qualify as an audiophile. No offense intended to him, but take his suggestions with a grain of salt.

Creative cleared up most issues, especially on the Titanium line. Not perfect, but not horrible either. Xonar is good too, but also has driver issues. There are also Auzentech X-Fi cards to consider. Slightly better drivers than creative, a hell of a lot better hardware. Some models even have built in headphone amps. As far as sound quality, ALC889 competes with none of them, not even the bottom of the line X-fi.

But meh, if you can't afford one, you can't afford one. lol.

PS: Can I ask what Shure earbuds you have?
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
Or if you want even better quality if only just for stereo music (who wants that these days jeez lol) try a M-Audio Audiophile 192, can also be used with ProTools and other software for excellent music production, M-Audio do great stuff :)
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Or if you want even better quality if only just for stereo music (who wants that these days jeez lol) try a M-Audio Audiophile 192, can also be used with ProTools and other software for excellent music production, M-Audio do great stuff :)

Yep. The sure do. We use M-Audio monitors in the studio.
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
Sweet at TAFE, we got the HD3 System in our main studio room connected to a Soundtracs Mixing Desk and some active Dynaudio BM15A Studio Monitors, as well as another studio, 5 rehearsal rooms, 3 edit suites with a $65,000 motorized Behringer mixing console of much interest, 1 Mac Lab, 1 Live Room, and 1 Live Venue equipped with some nice Seers gear, I love it :)
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Sweet at TAFE, we got the HD3 System in our main studio room connected to a Soundtracs Mixing Desk and some active Dynaudio BM15A Studio Monitors, as well as another studio, 5 rehearsal rooms, 3 edit suites with a $65,000 motorized Behringer mixing console of much interest, 1 Mac Lab, 1 Live Room, and 1 Live Venue equipped with some nice Seers gear, I love it :)

lol. We aren't nearly that advanced. It's just a hobby studio, primarily run on a Mac Pro. One of our biggest chunks of money went to Waves for the Diamond Plug-In pack. Started on a Firepod and virtual mixer, primarily using Logic and Reason.

My partner in crime updated about a month back, and he won't tell me what hardware he bought, so I'll have to stop in soon. I'm thinking it's a mixing desk or something similar. He likes surprising people. lol.
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
lol. We aren't nearly that advanced. It's just a hobby studio, primarily run on a Mac Pro. One of our biggest chunks of money went to Waves for the Diamond Plug-In pack. Started on a Firepod and virtual mixer, primarily using Logic and Reason.

My partner in crime updated about a month back, and he won't tell me what hardware he bought, so I'll have to stop in soon. I'm thinking it's a mixing desk or something similar. He likes surprising people. lol.

Do much MIDI stuff? I guess so using Logic. Yeah, I'd eventually like a studio of my own going, specializing in speaker design, possibly making my home setup a bit more expansive as well.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Do much MIDI stuff? I guess so using Logic. Yeah, I'd eventually like a studio of my own going, specializing in speaker design, possibly making my home setup a bit more expansive as well.

Yeah, the friend I built the studio with does a lot with synths. Lots of Industrial music influence. He uses a Kurzweil controller. Not sure which tho. I can't play the keys, personally.
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
Synths are pretty fun to play with. I've been doing lots of basic live recording lately, then putting stuff in the studio for upload to play with later on the ProTools systems in the Lab. Quite frankly I have had enough of all this Microphone research getting pounded into us. Essential to know I guess and through it I have corrected quite a few home theatre shop peoples about stuff. Gain structure and signal flow is also some very handy stuff to be taught.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
I would love to go to school for the stuff. As it stands, I just do things by ear. I don't have any real technical training in it. I'm petty much just an audiophile that likes to dabble in recording, production and mixing.
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
Next course I would like to do is on general acoustics, or psychoacoustics, and maybe a little basic electronic engineering, cos like yourself I had my own knowledge and did things by ear but now I have decided to get my foot in the door so to speak and expand my knowledge a bit.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Learning more about psychacoustics would be awesome. There are just so many possible applications.
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
Indeed, will help me greatly with my personal venture into speaker design. I have many concepts I want to test out, and going to TAFE gives me a great opportunity to discuss anything I may be curious about with other Sound Engineers. Currently working on my own speakers as I have been for quite some time now, was thinking of next getting some new Peerless HDS Exclusive 5 1/4" Mid's for them as the one's in them now are only 4" and more so will have to design a rear sealed compartment inside the speaker for them to go into of appropriate volume according to the T&S parameters of them of course. I already have my Vifa Dual Contentric Super Tweeters, after my Mid's are done, Im then gonna chuck in 2x 12" SB Acoustics Drivers in each tower, then after all that, I gonna get all the appropriate high end parts for the crossovers, and they should be mint. :) Also picked up a random 12" home theater sub-woofer the other day, that has no specs on the box or the driver itself, but looks absolutely monstrous so I'm gonna give that a go for the time being cos atm my sub consists of a downwards firing Jamo E4SUB.1 which I have replaced the driver with the 8" from the sub of the Z-680 THX Certified Logitech set. Bigger sub should make a nice difference of re-enforcement at higher volume levels.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.66/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Sounds like an awesome setup, although I always preferred the generally faster attack and decay of 10" lows. Most 12" lows are to muddy for me and my musical preferences.
 

SabreWulf69

New Member
Joined
Jan 23, 2010
Messages
358 (0.07/day)
Location
Cooloongup, Western Australia
System Name GET FUCKED
Processor GET FUCKED
Motherboard GET FUCKED
Cooling GET FUCKED
Memory GET FUCKED
Video Card(s) GET FUCKED
Storage GET FUCKED
Display(s) GET FUCKED
Case GET FUCKED
Audio Device(s) GET FUCKED
Power Supply GET FUCKED
Software GET FUCKED
Benchmark Scores GET FUCKED
True, I always have like the Bower & Wilkins PV1 Subwoofer for music and that only uses 2 10"s but it still hammers :)
 
Top