The AMD Phenom II OC'ers Club

[fullinfusion]

i could post newegg invoices off all of my chips other than the 945ES and 955BE (prerelease)

honestly i go off of what i always do in my head some things work while others don't and i go off of my trail and error sheets till i get a match that i like.




lol my 45xx clock was all six cores but the room was in the 55F zone

well thats cooler than my room, so you point is?

My room is a constant 24c bro.... a tad higher than your 55F

 

[fullinfusion]

Ok i got a question! i currently have a 200GHP pump. if i upgrade to a 370GPH pump would it reduce temps?

doubt it.... its going to flow faster than it can cool

 

[brandonwh64]

OK just wondering!

 

[cdawall]

well thats cooler than my room, so you point is?

My room is a constant 24c bro.... a tad higher than your 55F

phenom scales on temps better than voltages preventing heat is the best way to clock thuban the hardwired 70w TEC in my V10 helps some (55C load@4.3ghz 1.5625v) but in all honesty i just find were the cores max out and push it that much higher in windows until the bastard bsods and when that happens i up the voltage or get bigger fans

 

[fullinfusion]

CP is the coolest ever but not nearly as cool as fullinfusion who basically gave me 90% of a water cooling kit but yea... rambling CP rocks thanks man sending ya a pm

David gave me the rad bro, as I gave you a rad.... what comes around goes around...

Only the good ppl get stuff for free....

only the nice real no BS ppl get things free is what Im getting at.

 

[cdawall]

David gave me the rad bro, as I gave you a rad.... what comes around goes around...

Only the good ppl get stuff for free....

only the nice real no BS ppl get things free is what Im getting at.

were is my free i would probably just give it to shaun if i got it free

 

[fullinfusion]

phenom scales on temps better than voltages preventing heat is the best way to clock thuban the hardwired 70w TEC in my V10 helps some (55C load@4.3ghz 1.5625v) but in all honesty i just find were the cores max out and push it that much higher in windows until the bastard bsods and when that happens i up the voltage or get bigger fans

see I do it different than you do.... I clock in the bios and boot into windows.... If it dont than I push higher volts till she boots and runs stable passable marks...

I was never one to fiddle with software to clock

 

[cdawall]

see I do it different than you do.... I clock in the bios and boot into windows.... If it dont than I push higher volts till she boots and runs stable passable marks...

I was never one to fiddle with software to clock

if it makes you feel any better i make those my settings in the BIOS afterwards its easier to clock higher in windows to find my max i get bored easily and rebooting takes forever when your SSD's copy of windows is forked to shit

 

[fullinfusion]

were is my free i would probably just give it to shaun if i got it free

so you decided one the prize to give to me?

I know you said July 4th midnight.... that's why I haven't posted anymore scores yet.... Ima dropping the bomb the day of the 4th to have ya scrambling to try and beat it lol

 

[brandonwh64]

Would a 245W peltier lower temps much?

 

[Chicken Patty]

He's in Maine silly boy lol.... I just sent him a pump and rad

In his defence he went to Dade County public schools. Its not his fault

WTF does this say, main or new england? If it said New England, ME then that's a diffrent story

FUCKERS!!

David gave me the rad bro, as I gave you a rad.... what comes around goes around...

Only the good ppl get stuff for free....

only the nice real no BS ppl get things free is what Im getting at.

So who's the coolest now bitches

 

[fullinfusion]

Would a 245W peltier lower temps much?

hell ya
how many you talking about?

and you can handle the condensation build up down where you live?

 

[cdawall]

so you decided one the prize to give to me?

I know you said July 4th midnight.... that's why I haven't posted anymore scores yet.... Ima dropping the bomb the day of the 4th to have ya scrambling to try and beat it lol

i told you what was required for temps ill get my water cooling to read exactly that and i have 3 kits of ram to test thru for best clocks/timings

 

[fullinfusion]

WTF does this say, main or new england? If it said New England, ME then that's a diffrent story

FUCKERS!! http://img.techpowerup.org/100611/Capture144.jpg



So who's the coolest now bitches

Maine fool, want his addy?

Just give it to him bro, he's broke ass broke.... remember what goes around

 

[brandonwh64]

hell ya
how many you talking about?

and you can handle the condensation build up down where you live?

Found this on Frozen PC

245W Potted Peltier

Is there a way i can make this Inline?

 

[cdawall]

Would a 245W peltier lower temps much?

how would you add it into your loop

 

[fullinfusion]

i told you what was required for temps ill get my water cooling to read exactly that and i have 3 kits of ram to test thru for best clocks/timings

so you still didnt answer my Q! what ya giving me when I win?

and ya better remove Rickass score from the list... you missed his replies of he didn't know a pelt wasn't in the testing... air or water I believe ya said

 

[brandonwh64]

how would you add it into your loop

Thats what i was wonder as well! can this be made into a inline instead of right on the block?

 

[fullinfusion]

how would you add it into your loop

Hes not getting the full picture of how to use the pad CD....

 

[cdawall]

Found this on Frozen PC

245W Potted Peltier

Is there a way i can make this Inline?

most people do a waterblock on both sides and run dual loops other option is air cooling the hotside with a TRUE (very few coolers can handle a 245w TEC) and waterblock on the other side. easier way would be to do multiple 70-140w TECs with smaller air coolers on the hotside and waterblocks on the coldside. i personally have 3 maze4 gpu blocks on the way and 3 thuban coolers to try this with some ~125w TECs (they aren't ordered yet)

 

[fullinfusion]

Thats what i was wonder as well! can this be made into a inline instead of right on the block?

I'd tell ya but im working on getting a patten on this lol

 

[brandonwh64]

I'd tell ya but im working on getting a patten on this lol

most people do a waterblock on both sides and run dual loops other option is air cooling the hotside with a TRUE (very few coolers can handle a 245w TEC) and waterblock on the other side. easier way would be to do multiple 70-140w TECs with smaller air coolers on the hotside and waterblocks on the coldside. i personally have 3 maze4 gpu blocks on the way and 3 thuban coolers to try this with some ~125w TECs (they aren't ordered yet)

So two water blocks and the peltier in the middle?

Let me make a MS paint scheme of this

 

[fullinfusion]

most people do a waterblock on both sides and run dual loops other option is air cooling the hotside with a TRUE (very few coolers can handle a 245w TEC) and waterblock on the other side. easier way would be to do multiple 70-140w TECs with smaller air coolers on the hotside and waterblocks on the coldside. i personally have 3 maze4 gpu blocks on the way and 3 thuban coolers to try this with some ~125w TECs (they aren't ordered yet)

CD its a waste of time.... performance wise dollar per watt isnt feasible and wont cool as fast as one will hope... did you read the full story from where you linked us to?

 

[cdawall]

So two water blocks and the peltier in the middle?

Let me make a MS paint scheme of this

yes but they have to be on seperate loops and remember how much wattage a cpu puts out and how much the TECs cool check the stickie section of XS for more info on this stuff

CD its a waste of time.... performance wise dollar per watt isnt feasible and wont cool as fast as one will hope... did you read the full story from where you linked us to?

they cool quick enough for the amount of liquid in my planned loop and what did i link to?

and i also have the powersupply waterblocks and thuban coolers so the only thing i would buy is the TECs which is like $60 or so on ebay

 

[fullinfusion]

yes but they have to be on seperate loops and remember how much wattage a cpu puts out and how much the TECs cool check the stickie section of XS for more info on this stuff



they cool quick enough for the amount of liquid in my planned loop and what did i link to?

did a fresh os install and didnt save the linky

also the aluminum HS wont work, note the guy swapped it out with a few copper units?