• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Case Gallery] Dragon Reborn

1kingd2

New Member
Joined
Apr 27, 2010
Messages
26 (0.00/day)
To view this case mod, go here.



Specs:
AMD Phenom 1090t, Asus Crosshair 4, Asus EAH 5870 x2 AMD HAF 932 Case. AMD OCZ Black Edition Ram. Enermax 1050psu. Custom built water loops.

Mods:
I painted the inside of the case classic white, the front panel,inside back panel, and the HAF logo ferrari red. I also painted the outside classic black. I was going for the Asus ROG theme of red,black, and white. There are 2 loops that I fit inside of my case. My processor is cooled by the Swiftech 320 with 6 Coolmaster r4 fans. MY gpus are cooled by a Swiftech 220 with 4 enermaxs fans. There are a few scratches because It took a long time, and a lot of moving around parts to get every thing in place when creating my loops.

The last picture is my old single loop set up. I have made a lot of changes so I decided to create a new thread and delete my old one.
 
Last edited by a moderator:

Tessta*

New Member
Joined
Sep 13, 2010
Messages
26 (0.00/day)
Location
Uk, Derbyshire
System Name Money Pit
Processor Intel Core i7 920 2.6GHz @ 4GHz - 1.26V
Motherboard Gigabyte X58A-UD5
Cooling Corsair A70
Memory 6G Corsair
Video Card(s) 9800GT
Storage Samsung Spinpoint F3 1TB
Display(s) Acer x193w
Case Lian Li
Audio Device(s) On-board
Power Supply Corsair TX650w
Software Lots
Benchmark Scores Many
very nice liking the paint job looks tidy mate :)
 
Joined
Aug 18, 2006
Messages
993 (0.15/day)
Location
Los Angeles...U.S.A
Processor i7 920
Motherboard EVGA X58
Cooling eight 120mm fans, Swiftech GTZ cpu block, 3 120mm radiator, MCP655 pump, primochill tubing
Memory 6 gig G-Skill DDR3 1600
Video Card(s) GTX 285's (SLI)
Storage 500GB Western Digital
Display(s) 3 Asus 23 in inchers
Case Lian Li A77B
Audio Device(s) on board 7.1
Power Supply Corsair 1000
Software win 7 64
Clean, I like it 9/10. How are those mobo temps? I read about stand-offs being too long and lots of chipset failures. I still will probably get the same board or whatever successor will be out for the next build. Nice paint job on the inside by the way
 

1kingd2

New Member
Joined
Apr 27, 2010
Messages
26 (0.00/day)
Clean, I like it 9/10. How are those mobo temps? I read about stand-offs being too long and lots of chipset failures. I still will probably get the same board or whatever successor will be out for the next build. Nice paint job on the inside by the way


I usually do not go off the mother board temps. I use core temp, and gpu z. I have had this same block on the crosshair iii, and the crosshair 4 with no problems. The only thing I can see where people go wrong if maybe they tightened the screws to the back plate too much, and creating unevening cooling on their processor, but I am not for sure about people's chipset faling due to this. Maybe this could also cause the mobo to over vault and frying the chipset? I have pushed my voltage up to 1.6v @4.5 trying to get a quick vantage run, and have not had any problems.

Thank you for the compliment.
 
Joined
Jan 26, 2009
Messages
347 (0.06/day)
Location
Jitra, Kedah, Malaysia
System Name KXa DrakeN
Processor Intel Core i7 3770k
Motherboard Asus Maximus IV Extreme-Z Z68 1155
Cooling NZXT Kraken X60
Memory 8GB Ripjaw-X Red 1866mhz
Video Card(s) 2X ASUS GTX780 DCUII OC
Storage Crucial M4 128gb+Intel 320 160gb Gen3+2TB BLack WD+1TB Black WD
Display(s) DELL S2740L 27'' LED LCD
Case NZXT Phantom 410
Audio Device(s) ASUS XONAR D2X
Power Supply Corsair HX1050wt
Software Windows 7 Ultimate SP1 64bit
nice.. nearly similar to my rig.. keep it up
 
Top