• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

post your AMD Brisbane overclocks

Athlon2K15

HyperVtX™
Joined
Sep 27, 2006
Messages
7,909 (1.19/day)
Location
O-H-I-O
Processor Intel Core i9 11900K
Motherboard MSI Z590 Carbon EK X
Cooling Custom Water
Memory Team DDR4 4000MHz
Video Card(s) ASUS TUF RTX 3080 OC
Storage WD WN850 1TB
Display(s) 43" LG NanoCell 4K 120Hz
Power Supply Asus Thor 1200w
Mouse Asus Strix Evolve
Keyboard Asus Strix Claymore
lol...can i add my cpu overclocks here? i know its not a brisbane but neither are half the other cpu's in this thread:toast:
 
Joined
Mar 18, 2010
Messages
303 (0.06/day)
Brisbane family is the athlon 64 x2 family. The 6000+ runs at 3.1Ghz. I don't think it would have much of a problem going past 3.6Ghz possibly. The Sempron x2 2300 is a different family. Overclocks great though.
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.12/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
Brisbane family is the athlon 64 x2 family. The 6000+ runs at 3.1Ghz. I don't think it would have much of a problem going past 3.6Ghz possibly. The Sempron x2 2300 is a different family. Overclocks great though.

The sempron is a brisbane core with half the l2 cache shut off.
 
Joined
Mar 18, 2010
Messages
303 (0.06/day)
The sempron is a brisbane core with half the l2 cache shut off.

Interesting. I just noticed that on wikipedia. Decent chips. I'm getting a new board for this AMD Athlon 64 x2 4800+ 2.4Ghz Socket 939 cpu. I'm going to overclock it and see if it outperforms the newer Brisbane sempron chip! exciting stuff!
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.02/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
try cooling the chipset alittle more if its passive. Also push alittle more voltage into it. Lower the HTT mult. as low as you can and up the HTT voltage a notch.Maybe try lowering the ram speed just to count it out. Could be caused by a week IMC on the chip that doesn't want to do higher. I know i had a hard time getting 1040 stable on the ram and 1066 was near impossible.
 
Top