NEW - 3DMark 11 Compilation

[2DividedbyZero]

2DividedbyZero|5970+5850|885/1250|P13533|i7 980X @ 4.5GHz

 

[renq]

renq|Club3D 2GB 6950|1005/1600|5542|Phenom II X4 B60 3,97GHz
http://3dmark.com/3dm11/902974

Couldn't care to push for 5600

 

[2DividedbyZero]

renq|Club3D 2GB 6950|1005/1600|5542|Phenom II X4 B60 3,97GHz
http://3dmark.com/3dm11/902974

http://www.upload.ee/image/1223358/5542.PNG

Couldn't care to push for 5600

for curiosity, could you do the run again with the 6950 at say... 900/1250?

 

[renq]

for curiosity, could you do the run again with the 6950 at say... 900/1250?

Sorry, can't be bothered today, however my attempts at lower clocks:

800/1250 - P4670 - http://3dmark.com/3dm11/895949
http://www.upload.ee/image/1220692/DEF_3DM11.PNG

GPU 920/1350, 1,125V - P5109 - http://3dmark.com/3dm11/896213

GPU 930/1350, 1,125V - P5140 - http://3dmark.com/3dm11/896268

GPU 950/1350, 1,131V - P5192 - http://3dmark.com/3dm11/896384 http://www.upload.ee/image/1220919/Clocks_max.PNG


CPU @ 3,89GHz; Gpu @ 1011/1625 - P5481 - max clocks iirc...however, bottlenecked by the cpu...

Currently I'm running the card with unlocked shaders at 6950 def clocks, cpu @235,5fsb 16,5 multi, got P4790 - http://3dmark.com/3dm11/907154 - 9,1% increase in shader number constitutes to 2,5% more points..

 

[MetalRacer]

MetalRacer|5970's QuadFire|962/1250|16108|i7 980x @ 4021MHz

 

[HammerON]

Nice score there Metal

 

[t_ski]

MetalRacer|5970's QuadFire|962/1250|16108|i7 980x @ 4021MHz

http://img.techpowerup.org/110417/Capture255.jpg

What happened to Denise??????

 

[MetalRacer]

What happened to Denise??????

She's right here on the daily driver.


MetalRacer| QuadFire 5970's|962/1250|14949|i7 2600K @ 4.8 GHz

 

[Deleted member 74752]

Anyone else notice how bugged the 11.4 driver is in this bench? It gives almost twice the fps vs any other driver.

 

[MetalRacer]

Anyone else notice how bugged the 11.4 driver is in this bench? It gives almost twice the fps vs any other driver.

All of the drivers before the 11.2's didn't utilize 100% of the cores in Trifire or QuadFire when running this bench. I only used the 11.2 for a short time before going to the 11.4 which did offer a boost in performance but no where near what I gained going from the 10.9 to the 11.2's.
Here's a comparison between the two in TriFire.

 

[Deleted member 74752]

You can see the fps counter bouncing like crazy in the bench screen when in CrossFire...no other driver does that and I have tried most of them.

 

[MetalRacer]

You can see the fps counter bouncing like crazy in the bench screen when in CrossFire...no other driver does that and I have tried most of them.

It does bounce like crazy for sure...it might be interesting to let Fraps run at the same time to compare fps.

 

[TRIPTEX_CAN]

TRIPTEX|5970|854/1207|8304|2500k @ 4500mhz

 

[TRIPTEX_CAN]

mine at lower clocks

http://img.techpowerup.org/110421/mine.png


Screw the 2k intel cpu's.

They claim bulldozer to be about the same scores as 2k intel prock's?

I doubt it

I wonder how much of that is GPUs though.

My chip doesnt have HT it's only 4 cores and nothing synthetic. I hope your Octo-voltage monster can edge it out.

 

[fullinfusion]

I wonder how much of that is GPUs though.

My chip doesnt have HT it's only 4 cores and nothing synthetic. I hope your Octo-voltage monster can edge it out.

Hahah I hear ya bro, I hear ya!

 

[MetalRacer]

MetalRacer|5970 + 5850 TriFire|962/1250|13859|i7 980x @ 4021MHz

 

[fullinfusion]

It does bounce like crazy for sure...it might be interesting to let Fraps run at the same time to compare fps.

I seen the same thing when I was running a 5870 along side the 5970.. It's like it was stalling in a sense, didn't know what it wanted to do..

 

[entropy13]

entropy13 | GTX 570@816/1036/1632 | P5469 | Core i7 2600 @ 3.9GHz

What should you be running? Performance?

 

[MetalRacer]

MetalRacer|5970 + 5850 TriFire|975/1250|13954|i7 980x @ 4021MHz

 

[p3gaz_001]

what's ulps active?

 

[2DividedbyZero]

what's ulps active?

ULPS = Ultra Low Power Saving

Used with crossfire enabled cards when in idle (2D) mode, the crossfired cards are set to inactive/disabled to save power.

 

[p3gaz_001]

don't know that since i'd never had an ati in my case, the last ati was an asus9600 se pro .... i think was agp ..

 

[renq]

renq|HD6950 1536 shaders|985/1600|P5603|Phenom II B60 @ 4018MHz

After loads of dxgi Device removed errors got finally a score better than with stock 1408 shaders.

 

[D007]

D007|Visiontek 5850|980/1150|4988|Core i7 960 Bloomfield @ 4.4Ghz.
Dam this 11 is really something on the single gpu.. Really making me consider getting an additional 5850 for good measure.

 

[Krony]

Krony|eVGA GTX580SC|962/1050|7289|i7 950 @ 4255MHz