it's a HIS 5870 with bracket painted white (will go into a Fractal Design case) and fitted with an EK RAM backplate and EK waterblock.
In nickel...
and since it'll run TriFire with a 5970 that have a CU block, I decided to spraypaint them both black... :shadedshu
Turned out rather nice though...
Of course I now read all kind of horrible stories about the EK nickel, so... but my trusty local dealer assured me neither he nor his danish customer so far have run into any issues.
I've checked the nickel and it looks fine, but should I be unlucky later on, he will of course replace it.
Painted or not!
PNY Verto GeForce 5200 FX 512megs PCI not the best but reliable enough to test older monitors and computers...sometimes too old for even having an AGP slot
That connector actually looks like AGP. It's possible to have AGP with less channels for a low end card, which is why so many pins are missing off the connector. The little angled tab thing at the back is a dead giveaway, no PCI connector has it, plus there's only one slot in the connector, PCI has two.
That connector actually looks like AGP. It's possible to have AGP with less channels for a low end card, which is why so many pins are missing off the connector. The little angled tab thing at the back is a dead giveaway, no PCI connector has it, plus there's only one slot in the connector, PCI has two.
That connector actually looks like AGP. It's possible to have AGP with less channels for a low end card, which is why so many pins are missing off the connector. The little angled tab thing at the back is a dead giveaway, no PCI connector has it, plus there's only one slot in the connector, PCI has two.