The AMD Phenom II OC'ers Club

trt740 · Jul 18, 2011

de.das.dude said:
no fair we cant see her face.

shes ten so maybe in a few years :slap:

de.das.dude · Jul 18, 2011

trt740 said:
shes ten so maybe in a few years

oh

*facepalm* lol

de.das.dude · Jul 18, 2011

Velvet Wafer said:
Well...i know your stuff, and its not bad...
but dont you think its pretty euphemistic to call yourself "Expert Extraordinaire",
when youre just good at DIY ghetto improvisation?
Not that it would bother me much, i just dont think it will benefit you, to overadvertise you in such a bold way!

just my 2 cents

its just sarcasm in my siggy

im not even a computer engineer

im from mechanical LOL

Velvet Wafer · Jul 18, 2011

de.das.dude said:
its just sarcasm in my siggy
im not even a computer engineer
im from mechanical LOL

oh, okay! Self-Sarcasm is indeed very sympathic! Just thought you meant that serious!

PotatoCat · Jul 25, 2011

hey guys, question about my overclock.

i overclocked my Phenom II to 3.60 Stock voltage and my load temps (tested using Prime95) are 57-58, is this a good temp range?

JrRacinFan · Jul 25, 2011

Something is wrong there. Try reseating your HSF.

de.das.dude · Jul 25, 2011

Velvet Wafer said:
oh, okay! Self-Sarcasm is indeed very sympathic! Just thought you meant that serious!

i cant even afford an aftermarket cooler.

fullinfusion · Jul 25, 2011

JrRacinFan said:
Something is wrong there. Try reseating your HSF.

No doubt! I was thinking the same thing.

The fan is plugged in hey? :rockout:

YautjaLord · Jul 25, 2011

Removing unnecessary stuff from my HDD plus thinking to move (eventually) to Win7 but only cause IE10 (according to this bloated M$ marketing strategy that they drop Vista out of support, corporate monopolistic f***s, lol) doesn't support Vista 32- & 64-bit at all!!!!!! Why i'm saying this? Cause it's time to upgrade some parts to OC my current 965BE on those: if i'll post my Phenom II 965BE OC on Sabertooth 990FX & Indigo Extreme, you won't mind if i'll remove SpeedFan & other progs like it leaving only CPU-Z & post the OC while Thermal Radar, TurboV EVO, DIGI+ VRM & afforementioned CPU-Z running? Don't worry - LinX, SuperPi 1.5XS & other progs like that will stay. Thanx, need to know cause end of August nears & i'll have enough cash to buy those parts by then. See you all on daily basis & with slightly improved 965BE OC by end of August.

MilkyWay · Jul 25, 2011

I need 1.375v to get 2600mhz stable on the cpu/nb is that okay?

PotatoCat · Jul 25, 2011

fullinfusion said:
No doubt! I was thinking the same thing.

The fan is plugged in hey?

both fans are plugged in, i reseated my cooler now and i still get the same temps... maybe its the TIM that came w/ the cooler?

JrRacinFan · Jul 25, 2011

MilkyWay said:
I need 1.375v to get 2600mhz stable on the cpu/nb is that okay?

That's fine. You can go up to 1.45v 24.7 although i suggest the lower the better.

@PotatoCat

There is definitely something wrong, what are your ambient temps? Can't be the stock TIM. Did you apply it with this method?

http://benchmarkreviews.com/index.p...sk=view&id=170&Itemid=38&limit=1&limitstart=5

MilkyWay · Jul 25, 2011

I read some people getting much lower volts than 1.375v i guess it just depends then

JrRacinFan · Jul 25, 2011

MilkyWay said:
I read some people getting much lower volts than 1.375v i guess it just depends then

My rule of thumb:
for 2.6Ghz
C2 = 1.5v max (have an unlockable 720)
C3 = 1.45v max(same case: unlockable 555)
Those are just my own personal "touch and feel" experiences.

If you can't obtain 2.6 then there is something wrong with the chip's IMC, that mainly pertains to an unlocked Deneb. I know native quads would be a smidgen different but essentially the same. Remember though, cooling is key if giving the IMC a shit-ton of volts. MAKE SURE you get no more than 55C load or you will suffer degradation.

PotatoCat · Jul 25, 2011

JrRacinFan said:
That's fine. You can go up to 1.45v 24.7 although i suggest the lower the better.

@PotatoCat

There is definitely something wrong, what are your ambient temps? Can't be the stock TIM. Did you apply it with this method?
http://benchmars.jpg
http://benchmarkreviews.com/index.p...sk=view&id=170&Itemid=38&limit=1&limitstart=5

not really, i applied a small dab on the CPU then i used a credit card to put little bits of TIM on the gaps between the nickel plate and the heat pipe. my ambient temps are about 33-34.

de.das.dude · Jul 25, 2011

MilkyWay said:
I read some people getting much lower volts than 1.375v i guess it just depends then

i have mine at 2500, 1.25V

and my board has >55C on the motherboard sensor. even while stock. should i worry?

JrRacinFan · Jul 25, 2011

de.das.dude said:
i have mine at 2500, 1.25V

and my board has >55C on the motherboard sensor. even while stock. should i worry?

You are just one if the cases of pretty good IMC. Dont worry at all.

de.das.dude · Jul 25, 2011

JrRacinFan said:
You are just one if the cases of pretty good IMC. Dont worry at all.

apparently i never goofed up. however when running intel's burn-in test. it said my system was unstable!

erocker · Jul 25, 2011

de.das.dude said:
apparently i never goofed up. however when running intel's burn-in test. it said my system was unstable!

Then it's unstable. :ohwell:

Your mobo temp sensor is probablly stuck, nothing to worry about.

brandonwh64 · Jul 25, 2011

My experience on the DHT coolers is that you need to apply paste to the CPU and a very thin layer to the bottom of the heatsink to fill the gaps along the copper and aluminum surfaces.

erocker · Jul 25, 2011

brandonwh64 said:
My experience on the DHT coolers is that you need to apply paste to the CPU and a very thin layer to the bottom of the heatsink to fill the gaps along the copper and aluminum surfaces.

That's pretty much what I do. I spread a thin layer on the CPU and rub TIM into the bottom of the DHT cooler to fill in the gaps.

JrRacinFan · Jul 25, 2011

de.das.dude said:
apparently i never goofed up. however when running intel's burn-in test. it said my system was unstable!

erocker said:
Then it's unstable. Your mobo temp sensor is probablly stuck, nothing to worry about.

Then I rebuke my statement; you will need a touch more volts.

PotatoCat · Jul 25, 2011

erocker said:
That's pretty much what I do. I spread a thin layer on the CPU and rub TIM into the bottom of the DHT cooler to fill in the gaps.

this is what i did but someone said my Temps are wayy off

erocker · Jul 25, 2011

PotatoCat said:
this is what i did but someone said my Temps are wayy off

Don't know why. This is the method I've always done and never had a problem. I doubt that the application of TIM was/is the source of the temp problem. You really need to screw up the application to make your temps way off.

PotatoCat · Jul 25, 2011

erocker said:
Don't know why. This is the method I've always done and never had a problem. I doubt that the application of TIM was/is the source of the temp problem. You really need to screw up the application to make your temps way off.

do you think its the TIM itself or maybe too much/too little TIM?? the Xigmatek Gaia came with a pretty cheap looking white TIM

System Name	Apple Bite
Processor	Intel I5
Motherboard	Apple
Memory	40gb of DDR 4 2700
Video Card(s)	ATI Radeon 500
Storage	Fusion Drive 1 TB
Display(s)	27 Inch IMac late 2017

System Name	Monke \| Work Thinkpad\| J1nnx took Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench

System Name	Monke \| Work Thinkpad\| J1nnx took Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

System Name	MAH PC
Processor	AMD Phenom II 965 @ 3.6GHz
Motherboard	AsRock 870 Extreme3
Cooling	Xigmatek Gaia w/ 2 GELID Silent Fans
Memory	4x2GB G.skill Ripjaws @ 800MHz (9-9-9-24)
Video Card(s)	XFX 6870 1GB Dual-Fan Black Edition
Storage	Samsung Spinpoint F3 1TB
Display(s)	SCEPTRE X9WG-NagaV 1440x900
Case	Cooler Master
Audio Device(s)	Onboard 7.1 w/ Creative SoundBlaster X-Fi MB TRIAL
Power Supply	Seasonic M12II 620W
Software	Windows 7 Home Premium

System Name	Snow White
Processor	Ryzen 7900x3d
Motherboard	AsRock B650E Steel Legend
Cooling	Custom Water 1x420
Memory	32GB T-Force Deltas
Video Card(s)	PowerColor 7900 XTX Liquid Devil
Storage	20+ TB
Display(s)	Sammy 49" 5k Ultrawide
Case	Tt CTE 600 Snow Edition
Audio Device(s)	Onboard
Power Supply	EVGA 1200W P2
Mouse	Corsair M65 RGB Elite White
Keyboard	Corsair K65 Mini
Software	Windows 10
Benchmark Scores	Avermedia Live HD2

System Name	YautjaLord
Processor	Ryzen 9 5900x @ 3700MHz
Motherboard	Gigabyte X570 Aorus Xtreme rev. 1.1
Cooling	EK-XE360mm front/SE360mm top/3xVardar 120mm top/3xbe quiet! Light Wings 120mm High Speed PWM/etc....
Memory	HyperX Predator 4x8GB 4000MHz @ 4000MHz
Video Card(s)	1xGigabyte RTX 3080 Master 10GB rev. 3.0 (watercooled)
Storage	Samsung 980 Pro 1TB (system)/Samsung 960 Pro M.2 NVMe (system) \|Samsung T7 Shield 1TB USB Type-C
Display(s)	LG 27GN950-B 4k IPS 1ms 144Hz HDR
Case	be quiet! Dark Base Pro 900 rev. 2 Black/Orange
Audio Device(s)	Integrated
Power Supply	Corsair HX1200
Mouse	Dragonwar ELE-G4.1 laser gaming mouse 9500dpi
Keyboard	Corsair K60 Pro Low Profile
Software	Windows 10 Pro 64-bit 21H2

Processor	AMD Ryzen 7 7800X3D
Motherboard	ASUS TUF x670e-Plus Wifi
Cooling	EK AIO 360. Phantek T30 fans.
Memory	32GB G.Skill 6000Mhz
Video Card(s)	Asus RTX 4090
Storage	WD/Samsung m.2's
Display(s)	LG C2 Evo OLED 42"
Case	Lian Li PC 011 Dynamic Evo
Audio Device(s)	Topping E70 DAC, SMSL SP200 Amp, Adam Audio T5V's, Hifiman Sundara's.
Power Supply	FSP Hydro Ti PRO 1000W
Mouse	Razer Basilisk V3 Pro
Keyboard	Epomaker 84 key
Software	Windows 11 Pro

The AMD Phenom II OC'ers Club

Pro Indian Modder

Pro Indian Modder

New Member

Served 5k and counting ...

Pro Indian Modder

Vanguard Beta Tester

New Member

Served 5k and counting ...

Served 5k and counting ...

New Member

Pro Indian Modder

Served 5k and counting ...

Pro Indian Modder

*

Addicted to Bacon and StarCrunches!!!

*

Served 5k and counting ...

New Member

*

New Member