Crunchers Helping Crunchers

[twilyth]

Since this isn't an official FS thread, I've removed any prices. If there's something you're interested in, pm me. Thanks.

AmpX, 2 x 2 gig set, DDR2-800, 5-5-5-15, 1.9v, NewEgg link

G.Skill, 2 x 2 gig set, DDR2-1066, 5-5-5-15, 2.0-2.1v, NewEgg link

OCZ Platinum, 2 x 2 gig set, DDR2-1066, 5-5-5-18, 2.1-2.2v, NewEgg link

G.Skill, 2 sets of 2 x 2 gig, DDR2-1000, 5-5-5-15, 2.0-2.1v, NewEgg link

CPUs

AMD Phenom 9750, AM2+, 2.4GHz, 125W, Quad, NewEgg link

Intel Q9450, LGA775, 2.66GHz, 95W, Quad, Intel product page

 

[Chicken Patty]

i went ahead and just put a link in the OP. thanks!

 

[twilyth]

i went ahead and just put a link in the OP. thanks!

Thanks CP, but you might have to edit some of those things out. Initially I had only posted a description and price so I could get some opinions on whether or not I was asking a fair price. I figured I would have to start a normal FS thread to actually sell stuff. I don't know if people got that part or not, but it was called to my attention that I hadn't included pix and that since it wasn't an FS thread, I shouldn't post prices.

You see, I can't remember what I did last time. I think I did an FS thread and then gave a discount for crunchers, but I didn't like doing it that way since in a couple of instances more than one person had an interest in an item and I wanted to give crunchers first crack at a discounted price.

So I thought that this time, in addition to getting a reality check on the prices, I would alert the team to what I had (or technically, was going to have) on offer. But that didn't work out either.

So I'm going to put up a standard [FS][US] thread later today and go from there.

I would still appreciate some input on what people here think are fair (undiscounted) prices for the stuff I've listed (shipping to continental US included). Otherwise, I am going based on completed ebay listings for the same or very similar items and have picked prices toward the low end of the range (if there is a range). None will be the lowest price - just pointing in that direction.

 

[Chicken Patty]

Thanks CP, but you might have to edit some of those things out. Initially I had only posted a description and price so I could get some opinions on whether or not I was asking a fair price. I figured I would have to start a normal FS thread to actually sell stuff. I don't know if people got that part or not, but it was called to my attention that I hadn't included pix and that since it wasn't an FS thread, I shouldn't post prices.

You see, I can't remember what I did last time. I think I did an FS thread and then gave a discount for crunchers, but I didn't like doing it that way since in a couple of instances more than one person had an interest in an item and I wanted to give crunchers first crack at a discounted price.

So I thought that this time, in addition to getting a reality check on the prices, I would alert the team to what I had (or technically, was going to have) on offer. But that didn't work out either.

So I'm going to put up a standard [FS][US] thread later today and go from there.

I would still appreciate some input on what people here think are fair (undiscounted) prices for the stuff I've listed (shipping to continental US included). Otherwise, I am going based on completed ebay listings for the same or very similar items and have picked prices toward the low end of the range (if there is a range). None will be the lowest price - just pointing in that direction.

As far as prices I'm out of the loop, but they seem okay. If you want to give a cruncher a discount, then you can just shave $10 off or what not.

 

[TheGrapist]

I'm going to sell all of my 1366 gear soon,next couple days or so.will consist of my sig rig and my back up i7 rig(i7 920 ,evga sli le board,3gb ram kit,610 watt pc power&cooling silencer and 750gb seagate drive).figured i'd let me fellow crunchers have first grabs at my hardware

 

[twilyth]

All prices reduced in my sale thread plus 10% off for crunchers with 50k or more points. Shipping to lower 48 included. I won't bump the thread with this announcement until tomorrow evening.

http://www.techpowerup.com/forums/showthread.php?p=2292683#post2292683

 

[Deleted member 74752]

Completely forgot about my little Atom that runs my MagicJack 24/7...it is now crunching away.

Anyone else have problems with work uploading without a monitor attached?

 

[BinaryMage]

Anyone else have problems with work uploading without a monitor attached?

I don't see how a monitor or lack thereof would make a difference, but run the Easy WCG config program in this thread, that should solve your problem.

 

[twilyth]

Completely forgot about my little Atom that runs my MagicJack 24/7...it is now crunching away.

http://i434.photobucket.com/albums/qq69/rickss69/DSC00595.jpg

Anyone else have problems with work uploading without a monitor attached?

It doesn't look like it's plugged in. Maybe that's the problem.

Just kidding.

I have my rigs set to check in every 2 hours but for some reason they will sometimes accumulate as many as 60 or more completed work units before reporting them. Data is uploaded and they are ready to report, but don't get reported. The easy config file fixes that by having completed units reported immediately. I'm happy to let the the server and client negotiate when they report though so I don't worry much about it. Either way is probably cool though.

 

[MetalRacer]

Anyone else have problems with work uploading without a monitor attached?

I've been running one without a monitor for almost a year without any problems. I do have WCG easy config installed and it uploads as soon as they are finished.

 

[(FIH) The Don]

its a bit out of place really lol

but i have 2 of these

which i dont think has been used too much really

it is anodized aluminium = bad for your copper loop, so dont take them if you have copper

they are for free, i will pay half the shipping

 

[Mindweaver]

Completely forgot about my little Atom that runs my MagicJack 24/7...it is now crunching away.

http://i434.photobucket.com/albums/qq69/rickss69/DSC00595.jpg

Anyone else have problems with work uploading without a monitor attached?

I've got 2 atoms crunching away for over 2 years now both with out monitors.. 1 just crunches and the other one i've got mounted in the ceiling that outputs to a projector i have hanging from the ceiling which doesn't get any air flow. They do a little better than the athlon 1700+ mp's I have crunching. Just ensure that you have HT enabled in BIOs.

Also you can remote desktop to them or use VNC.

 

[(FIH) The Don]

i have a 160GB sata 2.5" drive for the fellow crunchers out there

seagate momentus 5400.3

 

[JrRacinFan]

Don...

The hard drive wc blocks would be a good project to turn into a TEC chiller.

 

[PaulieG]

If any of my fellow crunchers are in need of an AMD AM2/AM3 cooler, I have a Thermaltake V1 that you can have. Just shoot me a few bucks for shipping.

 

[Radical_Edward]

If anyone has a extra SSD sitting around, or heck, even a better normal HDD than my current one. Let me know. I'm just looking for cheaper options other than what's on the egg.

 

[Chicken Patty]

If anyone has a extra SSD sitting around, or heck, even a better normal HDD than my current one. Let me know. I'm just looking for cheaper options other than what's on the egg.

I got all my HDD's in use right now I usually had spares, but got rid of some

 

[(FIH) The Don]

i will have one of these sometime next week

http://products.amd.com/pt-br/opter...07)&f7=C2&f8=45nm+SOI&f9=75+W&f10=1000&f11=4&

if anyone is interested hit me up, but only crunchers.

thinking 10$ + shipping ?

 

[Trigger911]

i will have one of these sometime next week

http://products.amd.com/pt-br/opter...07)&f7=C2&f8=45nm+SOI&f9=75+W&f10=1000&f11=4&

if anyone is interested hit me up, but only crunchers.

thinking 10$ + shipping ?

I would take it but i got a server board that requires 2 of them lmao

 

[p_o_s_pc]

I could use a decent PSU for my Phenom 9500 rig. The 350w SP doesn't seem to cut it. I get random hangs and the PSU runs very hot.

So something 400w and from a reliable brand.

 

[Chicken Patty]

Does anybody have some 7/16" or 1/2" tubing they are not using and they are willing to send my way?

 

[theonedub]

Does anybody have some 7/16" or 1/2" tubing they are not using and they are willing to send my way?

If the tubing here: http://www.techpowerup.com/forums/showthread.php?t=129926 works I will be willing to have it shipped to you (as long as shipping isnt unreasonable )

 

[Chicken Patty]

If the tubing here: http://www.techpowerup.com/forums/showthread.php?t=129926 works I will be willing to have it shipped to you (as long as shipping isnt unreasonable )

That'll work. Let me know, I'd be willing to reimburse you once I get paid.

 

[p_o_s_pc]

Anyone have a AM2/+//AM3 cpu up for grabs?
I still have a random mobo a delta PSU and some ram laying around,I would like to get another cruncher going. Doesn't have to be anything great.

I maybe on a diet but i still want me a small slice of pie!

 

[TheGrapist]

Anyone have a AM2/+//AM3 cpu up for grabs?
I still have a random mobo a delta PSU and some ram laying around,I would like to get another cruncher going. Doesn't have to be anything great.

I maybe on a diet but i still want me a small slice of pie!

might have one for you,also would just like to note i'm looking for an 1156 mobo that'll support crossfire