HyperSLI (Enabling SLI on non-sli motherboards)

[phoen]

Whats the difference between slipatch and hypersli?

modded drivers is useless with HyperSLI

 

[antandshell]

I changed a couple of settings in the bios inc graphic booster to auto from fast and memory from turbo to standard. Have not have bsod again yet. Maybe Hypersli is a little more sensitive to overclocking.

antandshell dump file tells that probably it was hardware issue. But i think there is a chance to Hypervising fault. If it is, so there is software legitimacy. You can cause the issue in any time if you find it. Try to recall what exactly software was working before BSOD.

 

[anatolymik]

I changed a couple of settings in the bios inc graphic booster to auto from fast and memory from turbo to standard. Have not have bsod again yet. Maybe Hypersli is a little more sensitive to overclocking.

Using Virtualization Technology can consume a little more than without it. But dont be confused by thought about having Virtualization Technology enabled in bios require more power right away. No. This settings only tells to software that it can enable Virtualization. While it's not enabled processor will not consume more power. But it's just my theory. We should ask Intel.

 

[tinytiger]

No. I need to make emulating virtualization technology. But there is a lots of work. First of all. I'll make supporting for all processors.

Would you please make a switch between VT-x and legacy mode?so can use winxp mode under legacy HyperSLI.

 

[snipe]

Works good for me so far. Updated my SLIPatch 1.5b to HyperSLI 0.1, left nVidia 285.38 modded drivers in.

BF3 runs as well as it did before.

Once an official driver package comes out I'll be able to tell definitively if it works without modded drivers; but I suspect that all will be well.


Thanks anatolymik!

Why leave modded drivers in? Does it not work properly with just straight 285.38?

 

[amine4ever]

guys i want to buy for 150$ max a mobo for 3 way sli, any suggestion?

 

[snipe]

For what processor?

 

[anatolymik]

Would you please make a switch between VT-x and legacy mode?so can use winxp mode under legacy HyperSLI.

Do you want to enable/disable Hypervisor after having windows started?

 

[amine4ever]

For what processor?

for i5

 

[Slizzo]

Why leave modded drivers in? Does it not work properly with just straight 285.38?

Don't feel like uninstalling drivers and driver cleaning currently. Will do so when a new official WHQL driver package is released by nVidia. I would figure they'll have one ready for BF3's release.

 

[snipe]

for i5

i5 what? 2500k? or is it 1st gen i5 socket LGA1156?

 

[amine4ever]

Lga1156

 

[snipe]

Well the only thing I can find that is currently available is not 3way.

http://www.ncix.com/products/?sku=44628&vpn=MAXIMUS%20III%20GENE&manufacture=ASUS

 

[amine4ever]

why do u think that's a good mobo?

 

[antandshell]

That would make sense. Anyone here who is overclocked please let us know if you got BSOD after installing Hypersli and stressing your system..... Thanks

Using Virtualization Technology can consume a little more than without it. But dont be confused by thought about having Virtualization Technology enabled in bios require more power right away. No. This settings only tells to software that it can enable Virtualization. While it's not enabled processor will not consume more power. But it's just my theory. We should ask Intel.

 

[phoen]

That would make sense. Anyone here who is overclocked please let us know if you got BSOD after installing Hypersli and stressing your system..... Thanks

No, SLI GTX 560 Ti Twin Frozr II/OC + O/C 1030/1160/4640 with 1.075 Core Voltage and
Q9550 @ 4Ghz + 4Go G.Skill Trident PC-8500 O/C @ 1140 Mhz, no BSOD.

 

[snipe]

why do u think that's a good mobo?

Well Asus makes good products and it is a Republic of Gamers board, which is better then standard boards usually. The only down side on that board is mATX

I have a Q9550 @ 3.2 and my RAM is at 900mhz and both my GTX 460 HAWKS are @ 850

 

[JrRacinFan]

why do u think that's a good mobo?

Should really be starting your own thread for this although....

ASUS P7P55 WS SuperComputer with NF200 LGA 1156 In...

 

[Slizzo]

That would make sense. Anyone here who is overclocked please let us know if you got BSOD after installing Hypersli and stressing your system..... Thanks

No issues with BSODs on my system, Q9550 @ 4.0GHz, Memory at 941MHz (underclocked from 1066MHz), GPUs at 775/1900 Core/Mem

 

[erickelime]

I get the message "unable to get boot informantion"

 

[anatolymik]

I get the message "unable to get boot informantion"

what windows you use?

 

[erickelime]

what windows you use?

I have 2 drives, one if ubuntu, other if windows 7 x32

I start if grub, and this go to windows boot

 

[tinytiger]

Do you want to enable/disable Hypervisor after having windows started?

Yes!By the way,Under legacy mode HyperSLI,can use winxp mode?
If can,we can choose one mode when install(update) HyperSLI,or we can select one mode before windows start.

 

[erickelime]

what windows you use?

hi, it works now, i disabled the grub and works

 

[anatolymik]

Yes!By the way,Under legacy mode HyperSLI,can use winxp mode?
If can,we can choose one mode when install(update) HyperSLI,or we can select one mode before windows start.

Legacy mode = SLIPatch 1.5, winxp mode you can use. but i'll make you can choose Legacy or Hyper mode in HyperSLI control panel. By the way you even will have not to do reboot. After pushing apply button you get mode activated. And one more thing. When windows is started, there is no need for HyperSLI or SLIPatch to be active because of NV do checks when system is booting. I think i'll make an option to you to choose disable hypervisor after windows is started. But we have AMD friends. And for now i'm getting AMD platform.