HyperSLI (Enabling SLI on non-sli motherboards)

[bassmouse]

Hypersli 0.7 Problem with apps and games

Hi, I have installed hypersli 0.7. everything seems fine when i tried to enable sli. However, when I tried to run 3dmarks vantage and some old games , for example, Tom Clancy's H.A.W.X. It shows me the flashing screen and lagging seriously. May I know why? my driver is 285.62 and 2*GTX460. BTW, when I running NEED FOR SPEED: THE RUN and BF3, they both acting normally, however, just cant tell the differences between sli and without sli. PLZ help!

 

[phoen]

Hi, I have installed hypersli 0.7. everything seems fine when i tried to enable sli. However, when I tried to run 3dmarks vantage and some old games , for example, Tom Clancy's H.A.W.X. It shows me the flashing screen and lagging seriously. May I know why? my driver is 285.62 and 2*GTX460. BTW, when I running NEED FOR SPEED: THE RUN and BF3, they both acting normally, however, just cant tell the differences between sli and without sli. PLZ help!

Motherboard ?

 

[bassmouse]

Motherboard ?

Gigabyte 890fx-ud3

 

[Athlon2K15]

flip your sli bridge see if it helps

 

[bassmouse]

flip your sli bridge see if it helps

Thanks for that. But I dont think that is the problem. My sli bridge is sitting very tight. Moreover, I have some feeling about the reason that maybe coming from the driver. I mean, hypersli 0.7 beta doesnt works well with 285.62. I will try to roll back the previous one and see how I go.

 

[zuniggy]

It works!!

So how do you get your 1st GPU to run at 16X and 2nd at 4x? Currently both my GPU's show running at 8x each and I haven't found a way to change to a 16x by 4x bus interface w/ my 2 GTX 260s.

 

[Athlon2K15]

its dependant on your motherboard

 

[zuniggy]

its dependant on your motherboard

p45 series... intel DP45SG. Bios recognizes both cards at 8x each, but doesn't allow me to physically change the speeds. Any idea if there is another program for this or am I SOL?

 

[Athlon2K15]

AFAIK there were only a few SLI boards that enabled you to change lane assignment,your is on the SOL list

 

[bassmouse]

I got that problem solved...dont know how i did lmfao

 

[oxy93n]

So how do you get your 1st GPU to run at 16X and 2nd at 4x? Currently both my GPU's show running at 8x each and I haven't found a way to change to a 16x by 4x bus interface w/ my 2 GTX 260s.

and i bet x8-x8 is better then x16-x4

i have seen many tests where x16-x16 and x8-x8 have same framerates

only when u use 3d vision and play at 5760x1080 x16-x16 is better

so when u use single monitor and sli dont worry about x16-x4 use your x8-x8 its fast enough

 

[Athlon2K15]

+1 to oxy.

 

[SetsunaFZero]

So how do you get your 1st GPU to run at 16X and 2nd at 4x? Currently both my GPU's show running at 8x each and I haven't found a way to change to a 16x by 4x bus interface w/ my 2 GTX 260s.

the performance difference from x16-16 to x8-x8 is not even close to 1% (benchmark with gtx580 sli) google for some benches if u dont believe

 

[Yimmeryams]

the performance difference from x16-16 to x8-x8 is not even close to 1% (benchmark with gtx580 sli) google for some benches if u dont believe

It matters if you're playing at a high resolution.

If you run some benchmarks of performance at 1024x768 at 8-8, and then at 16-16, there will be very little difference.

If you run some benchmarks of performance at 1920x1080, 2560x1440, or 4096x2160, especially in dual- or tri-monitor setups, you will notice a much larger difference.

 

[Hacko]

Guys, you sure HyperSLI works great with P45 chipset ?

I'm using "Asus P5Q Deluxe" with "BIOS v2301" and "Intel Chipset Inf Update Program V9.1.1.1014" : games are still crashing when SLI is activated. They works great with SLI desactivated... not matter SLI surround or not...

yes should work

¿?¿?

Work or not?????

 

[Athlon2K15]

no guarantee's but it seems HyperSLI is working on about every chipset so far.google around and see if anyone else has it running on P45

 

[zuniggy]

no guarantee's but it seems HyperSLI is working on about every chipset so far.google around and see if anyone else has it running on P45

I've looked... for about 2 weeks now. this forumn has bee the closest i've gotten. Unless anyone else on here knows of someone running a P45 series in SLI. Both cards running at 8x, but SLI still shows disabled in GPUZ. Read couple of post back that running in 16x & 4x enabled SLI to work...which was why i was asking. Just trying to get SLI enabled in Nvidia control panel.... help....

 

[ShadySWE]

I've looked... for about 2 weeks now. this forumn has bee the closest i've gotten. Unless anyone else on here knows of someone running a P45 series in SLI. Both cards running at 8x, but SLI still shows disabled in GPUZ. Read couple of post back that running in 16x & 4x enabled SLI to work...which was why i was asking. Just trying to get SLI enabled in Nvidia control panel.... help....

Try to turn off USB 3.0 aswell. For me with a p67 it worked!

 

[phoen]

I've looked... for about 2 weeks now. this forumn has bee the closest i've gotten. Unless anyone else on here knows of someone running a P45 series in SLI. Both cards running at 8x, but SLI still shows disabled in GPUZ. Read couple of post back that running in 16x & 4x enabled SLI to work...which was why i was asking. Just trying to get SLI enabled in Nvidia control panel.... help....

SLI running @ x8 x8 on Maximus II Formula P45, HyperSLI work perfectly.

 

[Hacko]

I have not found anything about SLI compatibility with P5Q Deluxe, anyone have this motherboard and a new SLI with last drivers???? within a week I'm going to buy an SLI and I do not want to go wrong.

 

[Canio]

Hi All,

Just new to the forum but being lurking for a while and came across this thread.
Not sure if i understand this correctly but is HyperSLI used to enable SLI on crossfire boards ?
As I currently have a Gigabyte GA-P55 USB3 board which i blindly purchased last year not knowing it didn’t have SLI.
I’m have a GTX460, windows 7 x64 with Nvidia Beta drivers 285.79.
Would this program enable SLI on this board ?

Thanks in advance,
Canio

 

[phoen]

Hi All,

Just new to the forum but being lurking for a while and came across this thread.
Not sure if i understand this correctly but is HyperSLI used to enable SLI on crossfire boards ?
As I currently have a Gigabyte GA-P55 USB3 board which i blindly purchased last year not knowing it didn’t have SLI.
I’m have a GTX460, windows 7 x64 with Nvidia Beta drivers 285.79.
Would this program enable SLI on this board ?

Thanks in advance,
Canio

System requirements:
Intel processor with Virtualization Technology (VT-x)

So, if you have Virtualization Technology yes i guess.

 

[chemburn]

So I am wondering the differences between HyperSli 0.1, 0.6, 0.7 ect. My guess is that if you find instability for one version you try the other? .7 I have had some crashes with it and I don't remember them with .6 so should I try it again or is it just not compatible with the newer Nvidia drivers?

Thanks

 

[anatolymik]

So I am wondering the differences between HyperSli 0.1, 0.6, 0.7 ect. My guess is that if you find instability for one version you try the other? .7 I have had some crashes with it and I don't remember them with .6 so should I try it again or is it just not compatible with the newer Nvidia drivers?

Thanks

what kind of crashes?

 

[chemburn]

what kind of crashes?

Everything graphical stops I can still hear audio but it never recovers. It is possible it has nothing to do with HyperSli and its the newer drivers but that's been happening lately