-
Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
Antec P280
- Thread starter Darksaber
- Start date
- Joined
- Jul 20, 2008
- Messages
- 4,016 (0.67/day)
- Location
- Ohio
| System Name | Desktop|| Virtual Host 0 |
|---|---|
| Processor | Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads) |
| Motherboard | ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset) |
| Cooling | Corsair Hydro H100 || Stock hotplug fans and passive heatsinks |
| Memory | 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs |
| Video Card(s) | MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care |
| Storage | Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure |
| Display(s) | ViewSonic VA2349S || remote iDRAC KVM console |
| Case | Antec P280 || Dell PowerEdge R710 |
| Audio Device(s) | HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care |
| Power Supply | SeaSonic X650 Gold || 2x870w hot-swappable |
| Mouse | Logitech G500 || remote iDRAC KVM console |
| Keyboard | Logitech G510 || remote iDRAC KVM console |
| Software | Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0 |
| Benchmark Scores | Over 9000 on the scouter |
There's still the rear exhaust fan as well. How much airflow you need depends on how hot your components are. If you're going to be overclocking and running high-end parts, I'd recommend having good clearance. 5cm should be good imo, but idk about 3cm.
Also, I'm not sure if the published measurements include the feet. If you have to, you can take the feet off though.
Anyways, those are just my thoughts; I wouldn't consider myself an expert on the matter.
- Joined
- Jul 20, 2008
- Messages
- 4,016 (0.67/day)
- Location
- Ohio
| System Name | Desktop|| Virtual Host 0 |
|---|---|
| Processor | Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads) |
| Motherboard | ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset) |
| Cooling | Corsair Hydro H100 || Stock hotplug fans and passive heatsinks |
| Memory | 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs |
| Video Card(s) | MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care |
| Storage | Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure |
| Display(s) | ViewSonic VA2349S || remote iDRAC KVM console |
| Case | Antec P280 || Dell PowerEdge R710 |
| Audio Device(s) | HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care |
| Power Supply | SeaSonic X650 Gold || 2x870w hot-swappable |
| Mouse | Logitech G500 || remote iDRAC KVM console |
| Keyboard | Logitech G510 || remote iDRAC KVM console |
| Software | Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0 |
| Benchmark Scores | Over 9000 on the scouter |
I would take some measurements to be sure. This case is pretty tall for a "mid-tower" I think. It's just as big as my old "full tower".
- Joined
- Nov 8, 2011
- Messages
- 150 (0.03/day)
| System Name | Bandito | Intel NUC 12 Enthusiast |
|---|---|
| Processor | Intel i7 10900K 5.1 all core| i7 12700H |
| Motherboard | Asrock Z590 Extreme | NUC barebone Kit |
| Cooling | Noctua C14S | stock |
| Memory | Crucial Ballistics 64GB(4x16GB) 3000MTs | Crucial Ballistics 64GB(2x32GB) 3200MTs |
| Video Card(s) | Sapphire Radeon 6700XT 12GB Nitro Plus | Arc A770M 16GB |
| Storage | too many ssd's and an 3TB hard drive |
| Display(s) | Asus 34 " Proart, LG 34 inch ultrawide, HP 27 inch and LG 32inch UHD |
| Case | White Lian-li Lancool 3 | NUC barebone kit |
| Audio Device(s) | Creative Sound Blaster Z |Focusrite 2i2 |
| Power Supply | Coolermaster 850w Gold | included 320w |
| Mouse | Logitech G703 |
| Keyboard | Logitech G615 |
| Software | MS Windows 11 Pro 64-Bit |
Just built it with a corsair h100 in the top, had problems fitting with a push-pull config. the bottom fans touches the high PWM heatsink on the motherboard. Otherwise brilliant case and the room behind the motherboard is ridiculous.
- Joined
- Jul 20, 2008
- Messages
- 4,016 (0.67/day)
- Location
- Ohio
| System Name | Desktop|| Virtual Host 0 |
|---|---|
| Processor | Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads) |
| Motherboard | ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset) |
| Cooling | Corsair Hydro H100 || Stock hotplug fans and passive heatsinks |
| Memory | 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs |
| Video Card(s) | MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care |
| Storage | Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure |
| Display(s) | ViewSonic VA2349S || remote iDRAC KVM console |
| Case | Antec P280 || Dell PowerEdge R710 |
| Audio Device(s) | HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care |
| Power Supply | SeaSonic X650 Gold || 2x870w hot-swappable |
| Mouse | Logitech G500 || remote iDRAC KVM console |
| Keyboard | Logitech G510 || remote iDRAC KVM console |
| Software | Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0 |
| Benchmark Scores | Over 9000 on the scouter |
Yeah, same here. There is pretty much no way you can fit a rad up top with push-pull fans because of proximity to motherboard, unless you put the top fans on the outside of the case, which would look pretty stupid.
Honestly though, the H100 does well enough already that push-pull isn't even necessary. I saw a review where they only noticed a few degrees difference. Heck, I barely notice any difference in temps between having the fans turned all the way up or having them turned all the way down with my fan controller. And for anybody who hasn't heard the H100 fans, trust me, you want them on low
Hi Darksaber, how would you compare this to the Anidees AI6 you reviewed a little while back? I'd like to know how the new brand measures up since this is a pretty similar case in terms of price and functional design.
Thanks for the reviews
Ross
Thanks for the reviews
Ross
D3aDl0cK
New Member
Thanks for the Review!
As i was looking for a new case in order to replace my old Avance B031,
this Review helped me a lot, as i was also considering a BitFenix Raiden or Corsair Carbide 500R.
But now i got mine for a cheapy 70 bucks and i just can confirm that this case is great!
So happy about it, but first shocked how small my Avance looks in comparison :-D
May the P280 do it for the next 10 years
As i was looking for a new case in order to replace my old Avance B031,
this Review helped me a lot, as i was also considering a BitFenix Raiden or Corsair Carbide 500R.
But now i got mine for a cheapy 70 bucks and i just can confirm that this case is great!
So happy about it, but first shocked how small my Avance looks in comparison :-D
May the P280 do it for the next 10 years