Your PC ATM

[jbunch07]

I think it's a 212+ with corsair fans :3

Ninja'ed damn I just saw the cm logo on the top

 

[ThE_MaD_ShOt]

Cm hyper 212 + with corsair fans. Keeping it at a cool 30 degrees right now.

 

[Sir B. Fannybottom]

Ninja'ed damn I just saw the cm logo on the top

 

[arnoo1]

Here is mine ATM:

[url]http://farm8.staticflickr.com/7181/6806894406_db7f2142f5_b.jpg[/url]
[url]http://farm8.staticflickr.com/7193/6953005543_ed3cd4960d_b.jpg[/url]
[url]http://farm8.staticflickr.com/7189/6898988335_35391c844c_b.jpg[/url]
[url]http://farm8.staticflickr.com/7187/6898989199_124faf5643_b.jpg[/url]

wow just wow!
specs?

 

[WiL11o6]

Nothing too crazy:

2600k @ 4.5ghz (4.7 max for benchies)
Gigabyte Z68XP-UD4
8GB Corsair Vengeance 1600
Sapphire 7970s @ 1000/5000 (1200/1600 max for benchies)

 

[SaZ]

Old Master pics cooming soon...

The system:

Asus P4C800 DELUXE
Pentium 4 Prescott@3Ghz
4GB of generic ram
Ati 3850 AGP
And other...

 

[xBruce88x]

I hope this translated correctly...

ลักษณะที่ดีและสะอาด อะไรอุณหภูมิเช่นเดียวกับการติดตั้งน้ำเย็นมีอะไรบ้าง คุณทำเช่นนี้กับตัวเองและคุณจะทำงานร้านคอมพิวเตอร์หรือไม่? คุณมีอะไรกับฮาร์ดแวร์ที่ใช้ในคอมพิวเตอร์ที่? ขออภัยคำถามมากมายสำหรับ ฉันหวังว่าคุณไม่ทราบผมใช้ Google แปลเป็นแปลงจากภาษาอังกฤษเป็นภาษาไทย

edit: uh... where's the pic from the original post in the other thread? (from the "Thailand only" thread). I'm sure that section of Thai is confusing some people right about now lol

 

[Kast]

Picked this baby up today

 

[20mmrain]

Got my New Fans.... If you ask me looks much better. Flipped my Power supply also even though I argued it looked better the other way.... I started to like the looks this way better. Still waiting on a couple of things but its getting there.

Oh yeah and I sleeved my Crossfire bridge Which was a bitch to do

 

[trickson]

Got my New Fans.... If you ask me looks much better. Flipped my Power supply also even though I argued it looked better the other way.... I started to like the looks this way better. Still waiting on a couple of things but its getting there.

Oh yeah and I sleeved my Crossfire bridge Which was a bitch to do

http://www.techpowerup.com/forums/attachment.php?attachmentid=46117&stc=1&d=1331354100

Beautiful!

 

[THE_EGG]

Got my New Fans.... If you ask me looks much better. Flipped my Power supply also even though I argued it looked better the other way.... I started to like the looks this way better. Still waiting on a couple of things but its getting there.

Oh yeah and I sleeved my Crossfire bridge Which was a bitch to do

http://www.techpowerup.com/forums/attachment.php?attachmentid=46117&stc=1&d=1331354100

Umm if you don't mind me asking, how did you sleeve your crossfire bridge? Did you have to desolder the connectors and then resolder them back on>?

I must say the rig is looking very nice.

 

[Garrgoyle]

 

[Frizz]

I recently changed jobs out of apple and into a PC service store, built this system for a customer. I like to take pride in cable management lol.

Specs:

i7 3930K
Antec 900 V2
16GB Corsair low profile vengeance ram
2x 1.5TB WD Black
D14 Noctua SE2011 Ver.
X79 Asus
750 Antec High Current Gamer PSU

These CPUs are alot larger than sandy bridge CPU's I never knew there could be such a big difference in size on the X79 platform. Nonetheless I was impressed, just a bit disappointed I didn't get the opportunity today to fit in two 7970's in it

 

[Frizz]

Got my New Fans.... If you ask me looks much better. Flipped my Power supply also even though I argued it looked better the other way.... I started to like the looks this way better. Still waiting on a couple of things but its getting there.

Oh yeah and I sleeved my Crossfire bridge Which was a bitch to do

http://www.techpowerup.com/forums/attachment.php?attachmentid=46117&stc=1&d=1331354100

Far out man you got a sick rig there, good taste in hardware definitely getting that case for my next build

 

[20mmrain]

Umm if you don't mind me asking, how did you sleeve your crossfire bridge? Did you have to desolder the connectors and then resolder them back on>?

I must say the rig is looking very nice.

No I didn't desolder the connections.

1. I used 1/2 Sleeveing (I believe) And stretched it over the Crossfire bridge

*Note* And the reason I say "I believe" is because I had this stuff sitting around I didn't buy it. But if you all would like me to measure it so you guys can try.... let me know. Or if there is a big enough request for a "How To Thread" for this I would be glad to make one so that everyone can see how it is done.

2. Used 1 " wide Heat shrink ("I believe" same story as above ) and stretched it over both ends.

3. Used heat gun to shrink Heat shrink over ends.

4. While Heat shrink was warm molded the heat shrink to shape of the Crossfire bridge.

5. Trimmed wholes in the heat shrink to make connection.

Done

It takes a lot of practice and a few times to finally get it down. But once you do get it down it looks way awesome! Much better then some brown crossfire bridge.

 

[THE_EGG]

No I didn't desolder the connections.

1. I used 1/2 Sleeveing (I believe) And stretched it over the Crossfire bridge

*Note* And the reason I say "I believe" is because I had this stuff sitting around I didn't buy it. But if you all would like me to measure it so you guys can try.... let me know. Or if there is a big enough request for a "How To Thread" for this I would be glad to make one so that everyone can see how it is done.

2. Used 1 " wide Heat shrink ("I believe" same story as above ) and stretched it over both ends.

3. Used heat gun to shrink Heat shrink over ends.

4. While Heat shrink was warm molded the heat shrink to shape of the Crossfire bridge.

5. Trimmed wholes in the heat shrink to make connection.

Done

It takes a lot of practice and a few times to finally get it down. But once you do get it down it looks way awesome! Much better then some brown crossfire bridge.

wow haha must had been a tight fit with the heatshrink! Certainly does look nice than the default colour.

 

[jbunch07]

I recently changed jobs out of apple and into a PC service store, built this system for a customer. I like to take pride in cable management lol.

Specs:

i7 3930K
Antec 900 V2
16GB Corsair low profile vengeance ram
2x 1.5TB WD Black
D14 Noctua SE2011 Ver.
X79 Asus
750 Antec High Current Gamer PSU

These CPUs are alot larger than sandy bridge CPU's I never knew there could be such a big difference in size on the X79 platform. Nonetheless I was impressed, just a bit disappointed I didn't get the opportunity today to fit in two 7970's in it

http://img546.imageshack.us/img546/3421/img0814ck.jpg

Damn those Noctua coolers are massive....but they are among the best looking very good...i cant even see your rams lol.

 

[Gas2100]

my pc atm..it aint awesome pretty leet sauce but im happy with it

 

[trickson]

Okay so I got jealous and did this to mine. I know that it is no were close to any ones sweet setup here! I have what I have and well I did what I could to clean it up some. This case is huge but it doesn't have what many here have, Places to hide wires and pt rads and stuff like that, I just don't have any money to get a really nice case! Fuck my life!

 

[(FIH) The Don]

reported your post for lulzsauce

jk

looks good man, new tubes would be awesome, but if it works then its what matters

 

[trickson]

reported your post for lulzsauce

jk

looks good man, new tubes would be awesome, but if it works then its what matters

Yeah but just look at the sweet stuff here and then this ghetto ass junk heap! Make me all jealous is all. If I had a better case I know it would look just as nice as the other ones here.

 

[Gas2100]

Yeah but just look at the sweet stuff here and then this ghetto ass junk heap! Make me all jealous is all. If I had a better case I know it would look just as nice as the other ones here.

if you love the pc mate, it isnt junk. mine isnt as good as some here but i love it so to me, its the best. yours isnt a junker.

 

[trickson]

Well I did try to clean it up some. I rerouted the one water line behind the PSU that goes to the pump and I took out the ghetto fan and the ghetto fan shroud that was on the res as well. Yeah looks ok. Just not sweet. Also rerouted the 8 pin power cable behind the case so it doesn't show now. But that is as much as one can do with this case really.

 

[phill]

if you love the pc mate, it isnt junk. mine isnt as good as some here but i love it so to me, its the best. yours isnt a junker.

I agree If its not the latest and greatest who cares?? If it does what you want it to do, what else matters??

 

[trickson]

I agree If its not the latest and greatest who cares?? If it does what you want it to do, what else matters??

I am not talking about the specs, I am talking about the case. Hell I love the system specs just not the case. I need to get a new one but haven't 2 pennies to rub together to make a dime.