- Joined
- Nov 1, 2008
- Messages
- 4,213 (0.71/day)
- Location
- Vietnam
System Name | Gaming System / HTPC-Server |
---|---|
Processor | i7 8700K (@4.8 Ghz All-Core) / R7 5900X |
Motherboard | Z370 Aorus Ultra Gaming / MSI B450 Mortar Max |
Cooling | CM ML360 / CM ML240L |
Memory | 16Gb Hynix @3200 MHz / 16Gb Hynix @3000Mhz |
Video Card(s) | Zotac 3080 / Colorful 1060 |
Storage | 750G MX300 + 2x500G NVMe / 40Tb Reds + 1Tb WD Blue NVMe |
Display(s) | LG 27GN800-B 27'' 2K 144Hz / Sony TV |
Case | Xigmatek Aquarius Plus / Corsair Air 240 |
Audio Device(s) | On Board Realtek |
Power Supply | Super Flower Leadex III Gold 750W / Andyson TX-700 Platinum |
Mouse | Logitech G502 Hero / K400+ |
Keyboard | Wooting Two / K400+ |
Software | Windows 10 x64 |
Benchmark Scores | Cinebench R15 = 1542 3D Mark Timespy = 9758 |
Hi guys, i have a really strange problem on my Main rig.
Whenever i try to right a capital d, they keyboard does not respond to the shift+d input. All other key combinations are fine as far as i can tell. It's just the shift d combo.
any ideas
A second, unrelated problem, is related to the printer. It is hooked up to my main rig and shared across a network. Printing from any network computer is fine, it takes a few seconds.
But, on my main rig, when i try to print, it takes about 3 minutes for the print options screen to appear (in any application) and then another 4-5 minutes from pressing the print button to the printer actually printing and the program becoming responsive again (it hangs while waiting for the print job to be spooled)
Both are really strange problems, it may be a sign that i just need to re-install windows, but i'd rather not if possible.
Thanks
Whenever i try to right a capital d, they keyboard does not respond to the shift+d input. All other key combinations are fine as far as i can tell. It's just the shift d combo.
any ideas
A second, unrelated problem, is related to the printer. It is hooked up to my main rig and shared across a network. Printing from any network computer is fine, it takes a few seconds.
But, on my main rig, when i try to print, it takes about 3 minutes for the print options screen to appear (in any application) and then another 4-5 minutes from pressing the print button to the printer actually printing and the program becoming responsive again (it hangs while waiting for the print job to be spooled)
Both are really strange problems, it may be a sign that i just need to re-install windows, but i'd rather not if possible.
Thanks