- Joined
- May 29, 2011
- Messages
- 426 (0.09/day)
- Location
- Doncaster
System Name | 2020 build |
---|---|
Processor | 3950x |
Motherboard | Gigabyte Aorus extreme |
Cooling | Custom Loop. PETG. Phanteks 140 distro plate. EK 400mm res. EK GPU/back plate. EK CPU.480rad 2x360 |
Memory | 32gig 3600mhz 16,16,16,36. Trident Z Royal |
Video Card(s) | MSI gaming X trio 2080ti |
Storage | 2TB Gigabyte Aorus gen4. 1TB Aorus gen4 |
Display(s) | LG CX 55 |
Case | Phanteks 719 |
Audio Device(s) | Audeez LCD3. Chord Hugo 2 |
Power Supply | Seasonic prime 1300 platinum |
Software | Cubase, Adobe |
Asus P8p67 pro.
Intel I2600k.
8gig corsaire vengance 1600mhz ram.
Corsaire H70 cpu cooler.
Ati 6950.
OCZ 700w PSU.
OCZ 60gig Agility 3 6gb/s ssd.
1T Seagate barracuda 7200rpm sata 6gb/s hdd.
Hi all. I've been searching the net for the fastest ddr3 ram available. The fastest I have found is by Team Extreem, PC3-20800C10 2600MHz. The brief discription on OCUK website say it will work in these boards, Intel P67, Z68, X58, x79-based DDR3 motherboards. But I read somewhere else that the P8p67 pro can only run ram at a maximum of 2133MHz. Could some one advise me if my board will run 2600MHz ram? Also does any on here know of any ram that is realy fast with low latency. Also I have noticed that my CPU runs very hot under load and fairly hot at idle (35-44c). I have a overclock of 4GHz at the moment. I was using a overlock of 4.6 untill last week when I noticed that wilst converting a video in Adobe Prem Pro my cpu temps went upto 87c! I wonder if my amature attemps at overclocking in the past have damaged my cpu's silicon by running it at 80-90c for two hours with prime 95, is this possible why it runs quite hot nowadays?
Intel I2600k.
8gig corsaire vengance 1600mhz ram.
Corsaire H70 cpu cooler.
Ati 6950.
OCZ 700w PSU.
OCZ 60gig Agility 3 6gb/s ssd.
1T Seagate barracuda 7200rpm sata 6gb/s hdd.
Hi all. I've been searching the net for the fastest ddr3 ram available. The fastest I have found is by Team Extreem, PC3-20800C10 2600MHz. The brief discription on OCUK website say it will work in these boards, Intel P67, Z68, X58, x79-based DDR3 motherboards. But I read somewhere else that the P8p67 pro can only run ram at a maximum of 2133MHz. Could some one advise me if my board will run 2600MHz ram? Also does any on here know of any ram that is realy fast with low latency. Also I have noticed that my CPU runs very hot under load and fairly hot at idle (35-44c). I have a overclock of 4GHz at the moment. I was using a overlock of 4.6 untill last week when I noticed that wilst converting a video in Adobe Prem Pro my cpu temps went upto 87c! I wonder if my amature attemps at overclocking in the past have damaged my cpu's silicon by running it at 80-90c for two hours with prime 95, is this possible why it runs quite hot nowadays?