Sexy Hardware Close-Up Pic Clubhouse.

[reeltape]

my rampage iv

 

[Random Murderer]

my rampage iv
http://i1220.photobucket.com/albums/dd441/reeltape/rampage_iv_IMG_2541.jpg
http://i1220.photobucket.com/albums/dd441/reeltape/rampage_iv_IMG_2548.jpg
http://i1220.photobucket.com/albums/dd441/reeltape/rampage_iv_IMG_2649.jpg
http://i1220.photobucket.com/albums/dd441/reeltape/rampage_iv_IMG_2573.jpg

that is one sexy piece of hardware
which cpu are you going to drop in it?

 

[reeltape]

that is one sexy piece of hardware
which cpu are you going to drop in it?

Thanks! I am waiting on a 3930k, should be here this week. Looking forward to it....you have anything on the go that's not listed?
I see you have the 3820, it took me about a month to decide on whether to go with that or not, I got the 3930k for 575 all in, so, I went with that. After what I read about Ivy, I was not too hopeful on the Ivy Extreme, as the original plan was to get 3820 and wait for Ivy E, but I can always cell the 3930k down the road if I feel the urge to upgrade. I also see you have a Pentium D 820 clocked nicely. How is that holding up?

 

[Random Murderer]

Thanks! I am waiting on a 3930k, should be here this week. Looking forward to it....you have anything on the go that's not listed?

I'm not sure I understand the question here...
If you're asking if there's anything on its way that's not listed, the answer is not yet, lol. I'm actually still waiting for my second 7970 to show up. After this hole in my wallet goes away, it'll reappear in the form of a water loop and a new monitor(or three).

I see you have the 3820, it took me about a month to decide on whether to go with that or not, I got the 3930k for 575 all in, so, I went with that. After what I read about Ivy, I was not too hopeful on the Ivy Extreme, as the original plan was to get 3820 and wait for Ivy E, but I can always cell the 3930k down the road if I feel the urge to upgrade.

Was debating on the 3930k or the 3820 like you, planning to upgrade to IVB-E when it comes out. Picked the 3820 because 8 cores will do me fine until then, it uses less power and creates less heat than the 3930k and 3960x, and even though it's the "low-end" SB-E this thing just dominates everything I throw at it. Even if IVB-E is as big of a disappointment as IVB was to SB owners, I'll still be able to pick up a 3930k or 3960x for cheaper than now, and there will probably be a new stepping by then.
Even still, I haven't been able to completely stress this proc in anything but a stress-test, and there's still plenty of overclocking headroom.

Can't wait to see what you can do with that 3930k!

I also see you have a Pentium D 820 clocked nicely. How is that holding up?

The Pentium D rig is holding up alright. It basically sits and wishes it was used more, lol.









And in keeping on-topic, here's another pic of my R4E as the system was being assembled:

 

[Cold Storm]

The Pentium D rig is holding up alright. It basically sits and wishes it was used more, lol.

Just like a hooker!


Should have nice shots of another 7950 block come tonight!

 

[reeltape]

I'm not sure I understand the question here...
If you're asking if there's anything on its way that's not listed, the answer is not yet, lol. I'm actually still waiting for my second 7970 to show up. After this hole in my wallet goes away, it'll reappear in the form of a water loop and a new monitor(or three).

Sorry I wasn't all that clear, that's what I was asking though: are you building anything that wasn't in your system specs/info as it's listed on your profile. So you read through my mumbo-jumbo just fine! I hear ya on the cost of these things. What was the deciding factor on why you went with the 7970? I'm using an older pair of gpus til the 680 or 7970 drops in price.
Your thoughts on the 7970? You love it? What monitors would you buy if you could? I've got 3 mismatched Samsungs, looking to get 2 nice 27-30 inchers...a water loop would be cool. I'm going to see how the temps are without it...what is your 3820 at now OC'd under load?

Was debating on the 3930k or the 3820 like you, planning to upgrade to IVB-E when it comes out. Picked the 3820 because 8 cores will do me fine until then, it uses less power and creates less heat than the 3930k and 3960x, and even though it's the "low-end" SB-E this thing just dominates everything I throw at it. Even if IVB-E is as big of a disappointment as IVB was to SB owners, I'll still be able to pick up a 3930k or 3960x for cheaper than now, and there will probably be a new stepping by then.
Even still, I haven't been able to completely stress this proc in anything but a stress-test, and there's still plenty of overclocking headroom.

Can't wait to see what you can do with that 3930k!

That's promising. Before I bought my 3930k I had a hard time finding anyone who could give it the kind of confident praise you do. I am glad you like it and it's doing the job for you. Do you do much video/photo editing or encoding etc? I'll definitely post back with how it works in my real-life work environment. I can't believe I typed 'cell' instead of 'sell' I must be exhausted....
But, my reasoning on this logic was that I am only spending 200ish more to get what I want now and that I only build every few years, so if IVB-E is something special I'll buy it, but if not, 6 cores of SB-E will be sufficient for some time. I did get the C-2 stepping chip...

The Pentium D rig is holding up alright. It basically sits and wishes it was used more, lol.

- poor fellow! I'm sure it's got some use in store...maybe a HTPC?

And in keeping on-topic, here's another pic of my R4E as the system was being assembled:

Looks really good, what fans did you throw in there? I got some Scythe's (slipstream, various and thermalright as well - exact models I can't recall, but I'm building a silent case setup - well as quiet as I can in a Corsair 550d (modded for EATX)
Talk soon

 

[Shou Miko]

it decided it was cleaning time today, and i did patched up my cables some more on the back of my motherboard tray so i don't have a bush in there anymore xD

 

[dj-electric]

My first graphics card... running at 1400Mhz core clock. Thanks MSI.

Told you w1zz, you should have overvolt it and display the results...

 

[Random Murderer]

Sorry I wasn't all that clear, that's what I was asking though: are you building anything that wasn't in your system specs/info as it's listed on your profile. So you read through my mumbo-jumbo just fine! I hear ya on the cost of these things. What was the deciding factor on why you went with the 7970? I'm using an older pair of gpus til the 680 or 7970 drops in price.
Your thoughts on the 7970? You love it? What monitors would you buy if you could? I've got 3 mismatched Samsungs, looking to get 2 nice 27-30 inchers...a water loop would be cool. I'm going to see how the temps are without it...what is your 3820 at now OC'd under load?

7970: absolutely incredible. at stock it blows away my crossfire, overclocked 6850s. i'm starting to wonder why i'll need a second.

Monitors: really intrigued by the Yamakasi Catleap q270se. thinking about picking up one(or three). check out this thread for more info on them.

3820: temps are cool, even under linpack. highest i've seen is 68c, which is the main reason i haven't made the jump to water yet.

That's promising. Before I bought my 3930k I had a hard time finding anyone who could give it the kind of confident praise you do. I am glad you like it and it's doing the job for you. Do you do much video/photo editing or encoding etc? I'll definitely post back with how it works in my real-life work environment. I can't believe I typed 'cell' instead of 'sell' I must be exhausted....
But, my reasoning on this logic was that I am only spending 200ish more to get what I want now and that I only build every few years, so if IVB-E is something special I'll buy it, but if not, 6 cores of SB-E will be sufficient for some time. I did get the C-2 stepping chip...

mainly gaming, benching, and audio editing. the 3820 holds its own in all three of these tasks, even at stock. obviously in benching there would be a rather large performance boost for having 2c/4t more, but i couldn't justify the extra money for benching only(i know, blasphemy, lol).

- poor fellow! I'm sure it's got some use in store...maybe a HTPC?

I've a few ideas for it. it definitely won't feel neglected for too much longer

Looks really good, what fans did you throw in there? I got some Scythe's (slipstream, various and thermalright as well - exact models I can't recall, but I'm building a silent case setup - well as quiet as I can in a Corsair 550d (modded for EATX)
Talk soon

Mainly using Cooler Master Excalibur fans, but for one exhaust fan and two of five intakes I'm using the fans that came with the case(SilverStone something, lol). Reasoning behind this was to try and keep a positive pressure in the case to help reduce dust/hair intake. The system runs relatively quiet(compared to my old system, three fans but one was a Scythe Ultra Kaze, LOUD!) even though there are five intake fans, two exhaust, and two on the CPU heatsink, not to mention the (silent) 140mm fan in my PSU, 70mm fan on the RIVE chipset(forced to full speed in BIOS) and the blow-dryer fan on the 7970(if you get one, do NOT turn the fan up above 60%. at 100% i can hear it from across the house, no joke!)

If you have any more questions, don't hesitate to shoot me a private message. at least that way we won't fill the thread with more off-topic posts from a two-person conversation.

And to stay on-topic, expect some shots of my computer in its current state to be posted in a bit.

EDIT: I know i'm not a great photographer, but at least there are a few pieces of sexy hardware in one shot

 

[cadaveca]

a few:

 

[Athlon2K15]

come on dave power plugs arent sexy!!

 

[cadaveca]

come on dave power plugs arent sexy!!

but...but...they go in an out...

 

[Athlon2K15]

are they loose?

 

[Cold Storm]

They go in and out... lol.. I still gotta grab some Bitfenix cables... black can't keep in stock anywhere... GRRRRR...


RM, just let me know when you wants pics.. I'm 30f a way.



Now, for the goodies before tomorrow's photo shoot.

Then my favorite one

 

[Athlon2K15]

wow! that looks stunning CS

 

[Athlonite]

Shiny shiny shiny shiny shiny can me has

 

[Random Murderer]

RM, just let me know when you wants pics.. I'm 30f a way.

how about tonight?

Then my favorite one

http://img.techpowerup.org/120507/_5065414.jpg

this is the third 79xx card i've seen with the "hinge" and "latch" silkscreens next to the core, anyone have any idea what that's about?
i haven't taken the HSF off of my 7970 yet, so apologies if it's a dumb question.

 

[Cold Storm]

how about tonight?

You know it. All I gotta do for the new loop is connect the power to the cards and board... leak test last night was a success.

 

[Athlon2K15]

this is the third 79xx card i've seen with the "hinge" and "latch" silkscreens next to the core, anyone have any idea what that's about?
i haven't taken the HSF off of my 7970 yet, so apologies if it's a dumb question.

i wonder if they were going to go with an Intel type setup?

 

[t_ski]

Would be kewl if they had a socket and you could swap chips

 

[Athlonite]

That would certainly make things interesting

want a new gpu don't bother buying a whole new card just purchase a core replacement and drop it in and away you go

 

[Cold Storm]

I think it should be done with all the lower end cards that keep on rehashing... It could happen once they set a standards for the Die size.. Instead of making it smaller and smaller each year..

 

[Athlonite]

I don't know about that CS I'd not want to sidegrade to an HD7770

 

[Aquinus]

How about some pre-shader low-end hardware?

ATi Radeon x300 SE, 64Mb. It's PCI-E! It's about to become the video card for my soon to be file server considering that is about all an x300 can do. It also will be running headless once it is setup so it doesn't matter too much once I get it all configured.

I bought it as a backup card ~4 years ago iirc for 25 USD. I tried it once just to make sure it worked. Since then it has never needed to be used.

 

[dj-electric]