• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.
  • The forums have been upgraded with support for dark mode. By default it will follow the setting on your system/browser. You may override it by scrolling to the end of the page and clicking the gears icon.

Asus Z77 Sabertooth Help

GreenD

New Member
Joined
May 10, 2012
Messages
53 (0.01/day)
Location
Australia, Rockhampton
MY question is RAM Compatibility

1.) DDR3 16GB (4x4G) G.Skill 2133Mhz RipjawsZ Ram Kit
2.) DDR3 8GB (2x4G) Corsair 1600MHz Vengeance CL8 RAM Kit x 2

Will these RAM kits be compatible with the Z77 Sabertooth? and if they are which would be the better choice, and if not what RAM would be Recommended?

Thanks
 
Here is their list(s):
1382.jpg

2.jpg


You shouldn't have any worries with either kit.
 
Which of these would you recommend? i dont know if the G Skill is dual channel
 
take the tighter timing and higher speed
 
well i understand higher speed, the G skill but what do you mean by timing?
 
well i understand higher speed, the G skill but what do you mean by timing?

Memory timings or RAM timings measure the performance of DRAM memory using four parameters: CL, tRCD, tRP, and tRAS in units of clock cycles; they are commonly written as four numbers separated with dashes, e.g. 5-5-5-15. The fourth (tRAS) is often omitted, and a fifth, the Command rate, sometimes added. It is common to advertise only CL. These parameters specify the latencies (time delays) that affect speed of random access memory. Lower numbers imply faster performance
Capture.GIF

http://en.wikipedia.org/wiki/Memory_timings
http://www.hardwaresecrets.com/article/Understanding-RAM-Timings/26/2
 
I have the quad-channel kit of Ripjawz at 2133 (9-11-10-28) and it runs pretty well on SB-E. I would imagine IVB will handle it well too.
 
ive also actually wondered what dual channel actually means
 
ive also actually wondered what dual channel actually means
:eek: have you used google before?
Dual-channel-enabled memory controllers in a PC system architecture utilize two 64-bit data channels. Dual channel should not be confused with double data rate (DDR), in which data exchange happens twice per DRAM clock. The two technologies are independent of each other and many motherboards use both, by using DDR memory in a dual-channel configuration
single channel ram
`````````1.jpg

dual channel ram
`````````.jpg

so with dual channel memory your ram could handle data twice bigger than single channel ram
so it would boost your rig performance \
http://en.wikipedia.org/wiki/Multi-channel_memory_architecture
http://www.hardwaresecrets.com/article/Everything-You-Need-to-Know-About-the-Dual-Triple-and-Quad-Channel-Memory-Architectures/133/3
 
Last edited:
Back
Top