- Joined
- Aug 11, 2011
- Messages
- 4,357 (0.91/day)
- Location
- Mexico
System Name | Dell-y Driver |
---|---|
Processor | Core i5-10400 |
Motherboard | Asrock H410M-HVS |
Cooling | Intel 95w stock cooler |
Memory | 2x8 A-DATA 2999Mhz DDR4 |
Video Card(s) | UHD 630 |
Storage | 1TB WD Green M.2 - 4TB Seagate Barracuda |
Display(s) | Asus PA248 1920x1200 IPS |
Case | Dell Vostro 270S case |
Audio Device(s) | Onboard |
Power Supply | Dell 220w |
Software | Windows 10 64bit |
FX60, haven't seen one in quite a while now.
Is 2.8GHz the highest you can get? I remember seeing people run them at 3.2GHz+ 24/7.
Very clean build, I really like it. Nice work, man!
Yeah, that's the max I can get with that board. I think that I'm limited by the power delivery circuitry as I've seen reports of people getting theirs to 250HT with single core Athlons and in fact that's why I used DDR500 RAM for this build. I guess a dual core comes close to the power delivery limits of the board as even after re-capping and putting some heatsinks on the VRMs I can't get it past 2.8Ghz (multi at x15 doesn't even boot) and anything beyond 205HT is unstable. Either that or the FX60 I got is a lemon :/
There's still room for improvement, specially in cable management but the thing is like a jigsaw puzzle now
![Laugh :laugh: :laugh:](https://tpucdn.com/forums/data/assets/smilies/laugh-v1.gif)
For anyone interested here's the build log with benchmarks: http://www.techpowerup.com/forums/showthread.php?t=161350